JIS C 1515:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electroacoustics - Sound calibrators
Hardcopy , PDF
04-03-2022
English, Japanese
01-06-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Standard specifies the performance requirements for three classes of sound calibrator: laboratory standard (class LS), class 1 and class 2. Tolerance limits are smallest for class LS and greatest for class 2 instruments. Class LS sound calibrators are normally used only in the laboratory; class 1 and class 2 are considered as sound calibrators for field use. A class 1 sound calibrator is primarily intended for use with a class 1 sound level meter and a class 2 sound calibrator primarily with a class 2 sound level meter, as specified in IEC 61672-1.The tolerance limits for class LS sound calibrators are based on the use of a laboratory standard microphone, as specified in IEC 61094-1, for demonstrations of conformance to the requirements of this Standard. The tolerance limits for class 1 and class 2 sound calibrators are based on the use of a working standard microphone, as specified in IEC 61094-4, for demonstrations of conformance to the requirements of this Standard. A multi-level and multi-frequency sound calibrator has the same class designation for all sound pressure level and frequency combinations for which the instruction manual states that the instrument conforms to the requirements of this Standard. This Standard does not include requirements for equivalent free-field or random-incidence sound pressure levels, such as may be used in the overall sensitivity adjustment of a sound level meter. A sound calibrator may provide other functions, for example, tonebursts. Requirements for these other functions are not included in this Standard.
| DocumentType |
Standard
|
| Pages |
96
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
Reaffirmed 2013 2004(R2013) [21/10/2013]2004(R2008) [01/10/2008]2004 [20/03/2004]1991(R2003) [20/05/2003]1991(R1997) [20/01/1997]1991 [01/12/1991]
| JIS Z 8106:2000 | Glossary Of Acoustical Terms (general) |
| JIS C 61000-4-2:1999 | Electromagnetic Compatibility (emc) - Part 4: Testing And Measurement Techniques - Section 2: Electrostatic Discharge Immunity Test |
| JIS C 61000-4-3:2005 | Electromagnetic Compatibility (emc) - Part 4-3: Testing And Measurement Techniques - Radiated, Radio-frequency, Electromagnetic Field Immunity Test |
| JIS C 61000-6-1:2008 | Electromagnetic Compatibility (emc) - Part 6-1: Generic Standards - Immunity For Residential, Commercial And Light-industrial Environments |
| JIS C 1509-1:2005 | Electroacoustitcs - Sound level meters Part 1: Specifications |
| JIS Z 8733:2000 | Engineering And Survey Methods For The Determination Of Sound Power Level In General Sound Fields |
| JIS A 1440-1:2007 | Acoustics - Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a solid standard floor Part 1: Method using standard light impact source |
| JIS A 1417:2000 | Acoustics - Field Measurement Of Airborne Sound Insulation Of Buildings |
| JIS A 1441-1:2007 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
| JIS X 7779:2001 | Acoustics - Measurement Of Airborne Noise Emitted By Information Technology And Telecommunications Equipment |
| JIS A 8317-1:2001 | Acoustics - Measurement Of Exterior Noise Emitted By Earth-moving Machinery - Dynamic Test Conditions |
| JIS C 1509-2:2005 | Electroacoustics - Sound level meters Part 2: Pattern evaluation tests |
| JIS Z 8736-3:2006 | Acoustics - Determination Of Sound Power Levels Of Noise Sources Using Sound Intensity - Part 3: Precision Method For Measurement By Scanning |
| JIS Z 8736-1:1999 | Acoustics - Determination Of Sound Power Levels Of Noise Sources Using Sound Intensity - Part 1: Measurement At Discrete Points |
| JIS B 8044:2001 | Gas Turbines And Gas Turbine Sets - Measurement Of Emitted Airborne Noise - Engineering/survey Method |
| JIS Z 8732:2000 | Acoustics - Determination Of Sound Power Levels Of Noise Sources Using Sound Pressure - Precision Methods For Anechoic And Hemi-anechoic Rooms |
| JIS Z 8734:2000 | Precision Methods For The Determination Of Sound Power Level In Reverberation Rooms |
| JIS A 1429:2007 | Field Measurement Of Sound Pressure Level From Appliances And Equipment Used In Water Supply And Drainage Installations In Buildings |
| JIS F 0905:1998 | Measurement Of Noise Level On Board Vessels (accommodation Part) |
| JIS A 1430:2009 | Acoustics - Field measurements of airborne sound insulation of facade elements and facades |
| JIS Z 8737-1:2000 | Acoustics - Noise Emitted By Machinery And Equipment - Measurement Of Emission Sound Pressure Levels At A Work Station And At Other Specified Positions - Engineering Method In An Essentially Free Field Over A Reflecting Plane |
| JIS A 1418-2:2000 | Acoustics - Measurement Of Floor Impact Sound Insulation Of Buildings - Method Using Standard Heavy Impact Sources |
| JIS A 8317-2:2001 | Acoustics - Measurement At The Operator's Position Of Noise Emitted By Earth-moving Machinery - Dynamic Test Conditions |
| JIS A 1441-2:2007 | Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements Part 2: Field measurements |
| JIS A 1418-1:2000 | Acoustics - Measurement Of Floor Impact Sound Insulation Of Buildings - Method Using Standard Light Impact Source |
| JIS Z 8736-2:1999 | Acoustics - Determination Of Sound Power Levels Of Noise Sources Using Sound Intensity - Part 2: Measurement By Scanning |
| JIS E 4021:2008 | Rolling stock - Measurement of noise inside railbound vehicles |
| JIS C 1507:2006 | Electroacoustics - Instruments For The Measurement Of Sound Intensity - Measurement With Pairs Of Pressure Sensing Microphones |
| JIS A 1440-2:2007 | Acoustics - Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a solid standard floor Part 2: Method using standard heavy impact sources |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.