JIS G 0404:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel and steel products - General technical delivery requirements
Available format(s)
Hardcopy , PDF
Superseded date
23-12-2016
Superseded by
Language(s)
Japanese, English
Published date
20-03-2005
Publisher
This Standard specifies the general technical delivery requirements for all steel products, with the exception of steel forgings and castings and powder metallurgical products. Where the delivery requirements agreed upon for the order or specified in the appropriate product or material standard differ from the general technical delivery requirements defined in this Standard, then it is the requirements agreed for ordering or specified in the appropriate product or material standard which shall apply.
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| JIS G 0417:1999 | Steel and iron -- Sampling and preparation of samples for the determination of chemical composition |
| JIS Z 8401:1999 | Guide to the rounding of numbers |
| JIS Q 9001:2000 | Quality management systems - Requirements |
| JIS Z 2243:2008 | Brinell hardness test - Test method |
| JIS G 0416:2006 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing |
| JIS G 0415:1999 | Steel and steel products - Inspection documents |
| JIS G 0320:2004 | Standard test methods for heat analysis of steel products |
| JIS G 3315:2008 | Chromium coated tin free steel |
| JIS E 1120:2007 | Head hardened rails |
| JIS G 3140:2008 | Higher yield strength steel plates for bridges |
| JIS G 3508-2:2005 | Boron steels for cold heading - Part-2: Wires |
| JIS E 1107:2008 | Steel bolts and nuts for fish-plates and fastenings |
| JIS E 5402-1:2005 | Railway rolling stock - Solid wheel Part 1: Quality requirements |
| JIS G 3317:2007 | Hot-dip zinc-5 % aluminium alloy-coated steel sheet and strip |
| JIS E 1123:2007 | End hardened rails |
| JIS G 3136:2005 | Rolled steels for building structure |
| JIS G 3350:2005 | Light gauge sections for general structure |
| JIS G 3318:2008 | Prepainted hot-dip zinc - 5 % aluminium alloy-coated steel sheet and strip |
| JIS G 7218:2003 | Plain End As-welded And Sized Precision Steel Tubes - Technical Conditions For Delivery |
| JIS G 3137:2008 | Small diameter steel bars for prestressed concrete |
| JIS D 3607-1:2002 | Diesel Engines - Steel Tubes For High-pressure Fuel Injection Pipes - Part 1: Requirements For Seamless Cold-drawn Single-wall Tubes |
| JIS G 0416:2006 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing |
| JIS G 3303:2008 | Tinplate and blackplate |
| JIS G 4051:2005 | Carbon steels for machine structural use |
| JIS G 4110:2004 | High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service |
| JIS G 3475:2008 | Carbon steel tubes for building structure |
| JIS G 3602:2004 | Nickel and nickel alloy clad steels |
| JIS G 3508-1:2005 | Boron steels for cold heading Part 1: Wire rods |
| JIS G 3536:2008 | Steel wires and strands for prestressed concrete |
| JIS G 3474:2008 | High tensile strength steel tubes for steel tower |
| JIS G 7217:2003 | Plain End Welded Precision Steel Tubes - Technical Conditions For Delivery |
| JIS D 3607-2:2002 | Diesel Engines - Steel Tubes For High-pressure Fuel Injection Pipes - Part 2: Requirements For Composite Tubes |
| JIS G 4053:2003 | Low-alloyed steels for machine structural use |
| JIS G 3603:2005 | Titanium clad steels |
| JIS G 4904:2008 | Seamless nickel-chromium-iron alloy heat exchanger tubes |
| JIS G 3509-2:2003 | Low-alloyed steels for cold heading Part 2: Wires |
| JIS G 3134:2006 | Hot-rolled high strength steel plate, sheet and strip with improved formability for automobile structural uses |
| JIS G 3443-1:2007 | Coated steel pipes for water service Part 1: Pipes |
| JIS G 4321:2000 | Stainless steel for building structure |
| JIS G 3138:2005 | Rolled steel bars for building structure |
| JIS G 4109:2008 | Chromium-molybdenum alloy steel plates for boilers and pressure vessels |
| JIS B 8265:2003 | Construction of pressure vessel - General principles |
| JIS G 3129:2005 | High tensile strength steel for tower structural purposes |
| JIS G 3604:2004 | Copper and copper alloy clad steels |
| JIS G 3443-2:2007 | Coated steel pipes for water service Part 2: Fittings |
| JIS G 7225:2003 | Welded Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Electric Resistance And Induction Welded Unalloyed And Alloyed Steel Tubes With Specified Low Temperature Properties |
| JIS T 7403-1:2005 | Iron based alloys for surgical implant applications Part 1: Wrought stainless steel |
| JIS G 7303:2000 | Zinc-coated Steel Wire For Fencing |
| JIS G 4322:2008 | Stainless steel bars for concrete reinforcement |
| JIS G 3509-1:2003 | Low-alloyed steels for cold heading Part 1: Wire rods |
| JIS E 5402-2:2005 | Railway Rolling Stock - Solid Steel Wheel - Part 2: Dimensional And Balancing Requirements |
| JIS A 5523:2006 | Weldable hot rolled steel sheet piles |
| JIS G 7226:2003 | Welded Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Longitudinally Welded Austenitic Stainless Steel Tubes |
| JIS G 3312:2008 | Prepainted hot-dip zinc-coated steel sheet and strip |
| JIS G 3321:2007 | Hot-dip 55% aluminium-zinc alloy-coated steel sheet and strip |
| JIS T 7403-2:2005 | Stainless steel based alloys for surgical implant applications -- Part 2: Wrought high nitrogen stainless steel |
| JIS G 4110:2008 | High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service |
| JIS G 7220:2003 | Seamless Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Unalloyed And Alloyed Steels With Specified Elevated Temperature Properties |
| JIS G 7221:2003 | Seamless Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Unalloyed And Alloyed Steels With Specified Low Temperature Properties |
| JIS G 3322:2008 | Prepainted hot-dip 55 % aluminium - Zinc alloy-coated steel sheet and strip |
| JIS G 7224:2003 | Welded Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Electric Resistance And Induction Welded Unalloyed And Alloyed Steel Tubes With Specified Elevated Temperature Properties |
| JIS G 4903:2008 | Seamless nickel-chromium-iron alloy pipes |
| JIS G 7222:2003 | Seamless Steel Tubes For Pressure Purposes - Technical Delivery Conditions - Austenitic Stainless Steels |
| JIS G 7216:2003 | Plain End Seamless Precision Steel Tubes - Technical Conditions For Delivery |
| JIS B 8266:2003 | Alternative standard for construction of pressure vessels |
| JIS G 4804:2008 | Free-cutting steels |
| JIS G 4805:2008 | High carbon chromium bearing steels |
| JIS G 3507-1:2005 | Carbon steels for cold heading Part 1: Wire rods |
| JIS G 7304:2000 | Steel Wire For Mechanical Springs - General Requirements |
| JIS G 3318:2005 | Prepainted hot-dip zinc - 5% aluminium alloy-coated steel sheets and coils |
| JIS G 4107:2007 | Alloy steel bolting materials for high temperature service |
| JIS G 4108:2007 | Alloy steel bars for special application bolting materials |
| JIS G 3507-2:2005 | Carbon steels for cold heading - Part-2: Wires |
| JIS G 3109:2008 | Steel bars for prestressed concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.