JIS G 3312:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Prepainted hot-dip zinc-coated steel sheet and strip
Hardcopy , PDF
23-12-2016
English, Japanese
01-12-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Japanese Industrial Standard specifies the prepainted hot-dip zinc-coated steel sheet and strip, produced by applying a uniform coat of durable synthetic resin paint and baking it on either one or both surfaces of hot-dip zinc-coated steel sheet and strip, using cold-reduced base metal specified in JIS G 3302. In this case, the term, sheets, includes not only flat sheets but also sheets with corrugation of specified shape and dimensions given in JIS G 3316.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| JIS Z 9117:1984 | Retroreflective sheeting and tape for safety |
| JIS G 0415:1999 | Steel and steel products - Inspection documents |
| JIS G 3322:2008 | Prepainted hot-dip 55 % aluminium - Zinc alloy-coated steel sheet and strip |
| JIS Z 8703:1983 | Standard atmospheric conditions for testing |
| JIS Z 8401:1999 | Guide to the rounding of numbers |
| JIS K 5600-8-4:1999 | Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 4: Designation of degree of cracking Part 8: Evaluation of degradation of paint coatings - Section 4: Designation of degree of cracking |
| JIS K 5600-7-9:2006 | Testing Methods For Paints - Part 7: Determination Of Resistance To Cyclic Corrosion Conditions - Section 9: Salt Fog/dry/humidity |
| JIS Z 1522:2004 | Pressure sensitive adhesive cellophane tapes |
| JIS G 0404:2005 | Steel and steel products - General technical delivery requirements |
| JIS G 3318:2008 | Prepainted hot-dip zinc - 5 % aluminium alloy-coated steel sheet and strip |
| JIS R 6252:2006 | Abrasive papers |
| JIS K 5600-8-1:1999 | Testing methods for paints Part 8: Evaluation of degradation of paint coatings - Section 1: General principles and rating schemes |
| JIS K 5600-8-6:1999 | Testing methods for paints Part 8: Evaluation of degradation of paint coatings - Section 6: Rating of degree of chalking |
| JIS Z 2371:2000 | Methods of salt spray testing |
| JIS K 5600-8-2:2008 | Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 2: Designation of degree of blistering Part 8: Evaluation of degradation of paint coatings - Section 2: Designation of degree of blistering |
| JIS B 8418:2000 | Non Pressure Type Hot Water Generator |
| JIS A 4113:1995 | Solar Storage Tanks |
| JIS A 4009:1997 | Components of air duct |
| JIS A 0202:2008 | Thermal Insulation - Vocabulary |
| JIS G 3318:2008 | Prepainted hot-dip zinc - 5 % aluminium alloy-coated steel sheet and strip |
| JIS A 4704:2003 | Components Of Light-weight Rolling Door For Buildings |
| JIS A 6514:1995 | Components for metal roof-decks |
| JIS A 4801:1991 | Steel and aluminium alloy venetian blinds |
| JIS A 6512:2007 | Movable partitions |
| JIS A 4802:1994 | Curtain Rails (metal) |
| JIS A 6509:1994 | Building Components (wood Panel For Roof) |
| JIS A 4008:2008 | Fancoil Units |
| JIS A 6513:1994 | Fences And Gates With Metals |
| JIS A 4715:2002 | Components Of Sectional Overhead Door |
| JIS A 6510:1994 | Building Components (steel Panel For Roof) |
| JIS A 3304:1994 | Standard Of Structural Design Systems On The Prefabricated Temporary Houses |
| JIS A 4902:1994 | Fireproof Metal Amado For Dwellings |
| JIS A 4112:1995 | Solar Collectors |
| JIS A 6518:1994 | Components For Wire Net Fences |
| JIS G 3322:2008 | Prepainted hot-dip 55 % aluminium - Zinc alloy-coated steel sheet and strip |
| JIS A 9501:2006 | Standard practice for thermal insulation works |
| JIS A 4111:1997 | Solar water heater for dwellings |
| JIS B 8417:2000 | Vacuum Type Hot Water Generator |
| JIS Q 1013:2005 | Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for steel products |
| JIS A 6603:2008 | Steel sheds |
| JIS A 6504:1994 | Building Components (wood Panel For Wall) |
| JIS A 4714:1995 | Pvc Windows For Interior Installed |
| JIS A 6503:1994 | Building Components (steel Panel For Wall) |
| JIS A 6711:2004 | Composite Sidings With Metal |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.