JIS K 6851:1994
|
Testing methods for tensile shear strength of wood-to-wood adhesive bonds
|
JIS K 7077:1991
|
Testing method for charpy impact strength of carbon fiber reinforced plastics |
JIS Z 1711:1994
|
Polyethylene Film Bags |
JIS K 7195:1993
|
Testing method for heat sag of plastics |
JIS S 6023:1992
|
Glues |
JIS K 6935-2:1999
|
Plastics - Fluoropolymer Dispersions And Moulding And Extrusion Materials - Part 2: Preparation Of Test Specimens And Determination Of Properties |
JIS K 6854-4:1999
|
Adhesives - Determination Of Peel Strength Of Bonded Assemblies - Part 4: Floating-roller Method |
JIS K 7106:1995
|
Testing method for stiffness of plastics by means of a cantilever beam |
JIS K 7201:1995
|
Testing Method For Flammability Of Polymeric Materials Using The Oxygen Index Method |
JIS K 6916:2006
|
Urea-formaldehyde Molding Compounds |
JIS K 7154-2:2002
|
Plastics - Injection Moulding Of Test Specimens Of Thermosetting Powder Moulding Compounds (pmcs) - Part 2: Small Plates |
JIS K 7131:1994
|
Testing method for thermally stimulated current of plastic films |
JIS K 6852:1994
|
Testing methods for shear strength of adhesive bonds by compression loading |
JIS K 6940:1998
|
Glass flakes vinyl ester resin lining films |
JIS K 6849:1994
|
Testing Methods For Tensile Strength Of Adhesives |
JIS TS Z0011:2005
|
Densified Refuse Derived Fuel |
JIS K 6777:2007
|
Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply |
JIS K 7079:1991
|
Testing methods for in-plane shear properties of carbon fiber reinforced plastics by plus and minus 45 degrees tension method and two pairs of rails method |
JIS K 6776:2007
|
Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply |
JIS K 7205:1995
|
Testing method for abrasion resistance of plastics by abrasive |
JIS K 6916-1:2006
|
Plastics - Urea-formaldehyde Moulding Compounds - Part 1: Designation System And Basis For Specifications |
JIS K 6854-3:1999
|
Adhesives - Determination Of Peel Strength Of Bonded Assemblies - Part 3: Adhesives - 180 Degrees Peel Test For Flexible-to-flexible Bonded Assemblies (t-peel Test) |
JIS K 6717-1:2006
|
Plastics - Poly (methyl Methacrylate) (pmma) Moulding And Extrusion Materials - Part 1: Designation System And Basis For Specifications |
JIS K 6773:1999
|
Polyvinylchloride Waterstop |
JIS Z 7121:2007
|
Methods Of Life Cycle Inventory Studies On Plastics Including Recycling Stages |
JIS K 7215:1986
|
Testing methods for durometer hardness of plastics |
JIS K 6930:1994
|
Reclaimed granular molding materials of agricultural polyvinyl chloride film |
JIS K 6831:2003
|
Adhesives - Determination of temperature dependence of adhesive bonds |
JIS TS K0005:2008
|
Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
JIS K 7062:1992
|
Testing method for izod impact strength of glass fiber reinforced plastics |
JIS K 7137-1:2001
|
Plastics - Polytetrafluoroethylene (ptfe) Semi-finished Products - Part 1: Requirements And Designation |
JIS Z 7302-6:1999
|
Densified Refuse Derived Fuel - Part 6: Test Method For Total Chlorine Contents |
JIS K 7072:1991
|
Preparation of carbon fibre reinforced plastic panels for test purpose |
JIS C 8435:1999
|
Boxes And Box Covers Of Plastic Conduits |
JIS K 7129:1992
|
Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method) |
JIS K 6855:1994
|
Testing methods for impact shear strength of adhesive bonds |
JIS K 7223:1996
|
Testing method for water absorption capacity of super absorbent polymers |
JIS K 7088:1996
|
Testing methods for flexural creep of carbon fibre reinforced plastics |
JIS TR K0005:2001
|
Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
JIS K 6775-1:2005
|
Polyethylene pipe-fittings for the supply of gaseous fuels Part 1: Heatfusion fittings |
JIS K 6741:2007
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes |
JIS K 7120:1987
|
Testing methods of plastics by thermogravimetry |
JIS K 6778:2004
|
Polybutene (PB) pipes |
JIS K 7105:1981
|
Testing methods for optical properties of plastics |
JIS TR Z0014:1999
|
Densified Refuse Derived Fuel - Test Method For Ultimate Analysis |
JIS Z 1604:2006
|
Plugs and flanges for steel drums |
JIS K 7090:1996
|
Testing method for ultrasonic pulse echo technique of carbon fibre reinforced plastic panels |
JIS K 7117:1987
|
Testing Methods For Viscosity With A Rotational Viscometer Of Resins In The Liquid Form |
JIS K 6883:2008
|
Plastics - Perfluoroalkoxyalkane (pfa) Tubes |
JIS S 2029:2002
|
Plastics Table Wares |
JIS K 7012:1999
|
Glass-fiber reinforced thermosetting resin chemical-resistant tanks |
JIS K 6742:2007
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply |
JIS K 6775-2:2005
|
Polyethylene pipe-fittings for the supply of gaseous fuels Part 2: Spigot fittings |
JIS S 6032:2004
|
Plastics rulers |
JIS K 7082:1993
|
Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics |
JIS K 7224:1996
|
Testing method for water absorption rate of super absorbent polymers |
JIS Z 0238:1998
|
Testing methods for heat sealed flexible packages |
JIS K 7231:1986
|
General rules for testing methods of epoxide resins and hardeners |
JIS S 2041:1995
|
Plastics washing basins |
JIS S 2047:1995
|
Plastics food receptacles with lids for table use |
JIS K 6739:2007
|
Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for drain |
JIS K 5500:2000
|
Glossary Of Paint Terms |
JIS K 6915-2:2006
|
Plastics - Phenolic Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
JIS K 6792:2004
|
Polybutene (PB) pipes for water supply |
JIS K 6867:1999
|
Adhesives - Characterization Of Durability Of Structural-adhesive-bonded Assemblies - Wedge Rupture Test |
JIS K 6743:2007
|
Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply |
JIS K 7197:1991
|
Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis |
JIS S 2048:2006
|
Portable cooling boxes |
JIS K 6894:1996
|
Fluoroplastic coating film on metal substrate |
JIS K 7070:1999
|
Testing Method For Chemical Resistance Of Fiber Reinforced Plastics |
JIS K 7238:1991
|
Designation of epoxide resins |
JIS TR Z0013:1999
|
Densified Refuse Derived Fuel - Test Method For Apparent Bulk Density |
JIS TR K0006:2002
|
Plastics - Determination Of The Thermal Properties In Between Room Temperature And Decomposition And/or Vaporization Temperature |
JIS K 7137-2:2001
|
Plastics - Polytetrafluoroethylene (ptfe) Semi-finished Products - Part 2: Preparation Of Test Specimens And Determination Of Properties |
JIS K 7010:1995
|
Vocabulary for fibre reinforced plastic |
JIS K 7171:2008
|
Plastics - Determination of flexural properties |
JIS K 7216:1980
|
Testing method for brittleness temperature of plastics |
JIS K 7089:1996
|
Testing method for compression after impact properties of carbon fibre reinforced plastics |
JIS K 7080:1991
|
Testing methods for bearing strength of carbon fiber reinforced plastics |
JIS S 2040:1994
|
Large plastics lockable containers for household wares |
JIS Z 0107:1974
|
Glossary Of Terms Used In Wooden Box For Packing |
JIS K 7081:1993
|
Testing method for exposure to natural weathering of carbon fibre reinforced plastic |
JIS K 7203:1995
|
Testing Method For Flexural Properties Of Rigid Plastics |
JIS K 6788:2004
|
Crosslinked polyethylene (PE-X) pipe fittings for water supply |
JIS TR K0008:2003
|
Plastics - Determination Of Dynamic Mechanical Properties By Compression Vibration Method |
JIS K 6933:1999
|
Plastics - Polyamides - Determination Of Viscosity Number |
JIS K 7380:1999
|
Plastics - Homopolymer And Copolymer Resins Of Vinyl Chloride - Determination Of Residual Vinyl Chloride Monomer - Gas Chromatographic Method |
JIS K 7129:2008
|
Plastics -Film and sheeting - Determination of water vapour transmission rate - Instrumental method |
JIS B 7739:1989
|
Pendulum-type impact testing machines for non-metallic materials |
JIS K 6917-2:2006
|
Plastics - Melamine-formaldehyde Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
JIS K 7390:2003
|
Testing methods for reclaimed poly (ethylene terephthalate) (PET) moulding materials from PET bottle |
JIS C 8432:1999
|
Fittings Of Unplasticized Polyvinyl Chloride (pvc-u) Conduits |
JIS Z 7302-3:1999
|
Densified Refuse Derived Fuel - Part 3: Test Method For Moisture |
JIS Z 1716:2004
|
Non-oriented polyethylene terephthalate (PET) sheets and films for packaging |
JIS K 6804:2003
|
Poly(vinylacetate) Emulsion Adhesives For Woods |
JIS K 7083:1993
|
Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics |
JIS K 7154-1:2002
|
Plastics - Injection Moulding Of Test Specimens Of Thermosetting Powder Moulding Compounds (pmcs) - Part 1: General Principles And Moulding Of Multipurpose Test Specimens |
JIS K 7111:1996
|
Plastics - Determination of charpy impact strength |
JIS K 7074:1988
|
Testing methods for flexural properties of carbon fiber reinforced plastics |
JIS K 7113:1995
|
Testing method for tensile properties of plastics |
JIS K 7301:1995
|
Testing methods for tolylene diisocyanate type prepolymers for thermosetting urethane elastomers |
JIS K 7011:1989
|
Glass fiber reinforced plastics for structural use |
JIS A 1454:2005
|
Test Methods - Resilient Floorcoverings |
JIS K 7014:1997
|
Fittings and joints for fibre reinforced plastic pipes |
JIS K 7078:1991
|
Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method |
JIS K 6761:2004
|
Polyethylene pipes for General Purposes |
JIS K 7212:1999
|
General Rules For Tests For Thermal Ageing Properties Of Thermoplastics In The Form Of Sheet By Means Of Ovens |
JIS K 6856:1994
|
Testing methods for flexural strength of adhesive bonds |
JIS K 7194:1994
|
Testing method for resistivity of conductive plastics with a four-point probe array |
JIS Z 7302-1:1999
|
Densified Refuse Derived Fuel - Part 1: General Principles Of Testing Method |
JIS Z 7302-8:2002
|
Densified Refuse Derived Fuel - Part 8: Test Method For Ultimate Analysis |
JIS K 7073:1988
|
Testing method for tensile properties of carbon fiber reinforced plastics |
JIS R 1662:2004
|
Testing Method For Fracture Energy Of Fibre-reinforced Ceramic Matrix Composites |
JIS TR Z0011:2002
|
Densified Refuse Derived Fuel |
JIS K 7087:1996
|
Testing methods for tensile creep of carbon fibre reinforced plastics |
JIS K 7013:1997
|
Fibre reinforced plastic pipes |
JIS F 0701:1989
|
Criteria For Selection Of Plastics Used For Marine Electrical Appliances |
JIS K 7115:1999
|
Plastics - Determination of creep behaviour - Part 1: Tensile creep |
JIS G 3443-3:2007
|
Coated steel pipes for water service Part 3: External plastic coatings |
JIS K 7312:1996
|
Physical testing methods for molded products of thermosetting polyurethane elastomers |
JIS Z 1655:1993
|
Plastic Returnable Containers |
JIS TS K0008:2008
|
Plastics - Determination Of Dynamic Mechanical Properties By Compression Vibration Method |
JIS Z 0108:2005
|
Glossary of terms for packaging |
JIS Z 7302-4:1999
|
Densified Refuse Derived Fuel - Part 4: Test Method For Ash |
JIS K 7110:1999
|
Method Of Izod Impact Test For Rigid Plastics |
JIS K 7142:1996
|
Determination of the refractive index of plastics |
JIS K 7086:1993
|
Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics |
JIS C 9912:2007
|
The Marking For Identification Of Plastic Parts For Electrical And Electronic Equipment |
JIS K 7015:1998
|
Pultruded fibre reinforced plastics |
JIS S 2032:1995
|
Plastics buckets |
JIS TR Z0012:1999
|
Densified Refuse Derived Fuel - Test Method For Sulfur Content |
JIS K 6917:2006
|
Melamine-formaldehyde Molding Compounds |
JIS K 6770:2004
|
Crosslinked polyethylene (PE-X) pipe fittings |
JIS K 7061:1992
|
Testing method for charpy impact strength of glass fiber reinforced plastics |
JIS K 6935-1:1996
|
Plastics - Fluoropolymer Dispersions And Moulding And Extrusion Materials - Part 1: Designation System And Basis For Specifications |
JIS K 7218:1986
|
Testing methods for sliding wear resistance of plastics |
JIS K 6774:2005
|
Polyethylene pipes for the supply of gaseous fuels |
JIS K 7091:1996
|
Testing method for radiography of carbon fibre reinforced plastic panels |
JIS K 6807:1999
|
Test Methods For Formaldehyde Resin Liquid Adhesives For Wood |
JIS S 6051:2006
|
Plastics card cases |
JIS K 7196:1991
|
Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis |
JIS E 3023:1992
|
Insulating materials of insulated rail joint - Test methods |
JIS K 6863:1994
|
Testing Methods For The Softening Point Of Hot Melt Adhesives |
JIS K 6762:2004
|
Double wall polyethylene pipes for water supply |
JIS Z 7302-10:2002
|
Densified Refuse Derived Fuel - Part 10: Test Method For Disintegrated Contents |
JIS K 7116:1999
|
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading |
JIS K 7085:1993
|
Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics |
JIS K 9797:2006
|
Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled solid core |
JIS Z 4808:2002
|
Glove box for handling of radioactive substance |
JIS K 6848-3:1999
|
Adhesives - Testing Methods Of Bonding Strength Of Adhesives - Part 3: Guidelines For The Surface Preparation Of Plastics |
JIS K 6862:1984
|
Testing methods for melt viscosity of hot-melt adhesives |
JIS K 7122:1987
|
Testing methods for heat of transitions of plastics |
JIS K 7123:1987
|
Testing methods for specific heat capacity of plastics |
JIS K 6793:2004
|
Polybutene (PB) pipe fittings for water supply |
JIS K 6853:1994
|
Testing methods for cleavage strength of adhesive bonds |
JIS K 6828:1996
|
Testing methods for synthetic resin emulsions |
JIS K 7075:1991
|
Testing methods for carbon fiber content and void content of carbon fiber reinforced plastics |
JIS H 7008:2002
|
Glossary Of Terms Used In Ultrafine Metal Particles |
JIS TR K0001:2000
|
Testing Methods For Reclaimed (poly Ethylene Terephthalate) (pet) Molding Materials From Pet Bottle |
JIS K 7076:1991
|
Testing methods for compressive properties of carbon fibre reinforced plastics |
JIS K 6916-2:2006
|
Plastics - Urea-formaldehyde Moulding Compounds - Part 2: Preparation Of Test Specimens And Determination Of Properties |
JIS Z 0109:1992
|
Glossary of terms used in pressure sensitive adhesive tapes and sheets |
JIS C 6481:1996
|
Test methods of copper-clad laminates for printed wiring boards |
JIS K 7128-3:1998
|
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3: Right angled tear method |
JIS S 2049:1993
|
Plastic Receptacles For Homemade Tukemono (japanese Pickles) |
JIS K 7211:1976
|
General rules for testing impact strength of rigid plastics by the falling weight method |
JIS Z 7302-2:1999
|
Densified Refuse Derived Fuel - Part 2: Test Method For Gross Calorific Value |
JIS K 7214:1985
|
Testing methods for shear strength of plastics by punch tool |
JIS K 6775-3:2005
|
Polyethylene pipe-fittings for the supply of gaseous fuels Part 3: Electrofusion fittings |
JIS K 6919:1992
|
Liquid Unsaturated Polyester Resins For Fiber Reinforced Plastics |
JIS K 6915-1:2006
|
Plastics - Phenolic Moulding Compounds - Part 1: Designation System And Basis For Specifications |
JIS TS R0002:2008
|
Testing Method For Crack Growth Resistance (r-curve) Of Fine Ceramics |
JIS K 7092:2005
|
Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen |
JIS K 6833:1994
|
General testing methods for adhesives |
JIS K 7118:1995
|
General rules for testing fatigue of rigid plastics |
JIS K 6910:2007
|
Testing Methods For Phenolic Resins |
JIS K 7200:1986
|
Standard reference test specimens for calibrating a laboratory light exposure apparatus |
JIS K 6915:2006
|
Phenolic Molding Compounds |
JIS K 6780:2003
|
Profile wall polyethylene pipes |
JIS K 6769:2004
|
Crosslinked polyethylene (PE-X) pipes |
JIS Z 7302-5:2002
|
Densified Refuse Derived Fuel - Part 5: Test Method Of Metals Contents |
JIS Z 7302-7:2002
|
Densified Refuse Derived Fuel - Part 7: Test Method For Sulfur Content |
JIS K 6779:2004
|
Polybutene (PB) pipe fittings |
JIS Z 7302-9:2002
|
Densified Refuse Derived Fuel - Part 9: Test Method For Apparent Bulk Density |
JIS K 9798:2006
|
Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled foamed core |
JIS K 7084:1993
|
Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test |
JIS K 6932:2007
|
Recycled plastics stakes |
JIS K 6787:2004
|
Crosslinked polyethylene (PE-X) pipes for water supply |
JIS K 7374:2007
|
Plastics - Determination Of Image Clarity |
JIS K 6931:1991
|
Reclaimed plastics bars, rods, plates and piles |
JIS K 6917-1:2006
|
Plastics - Melamine-formaldehyde Moulding Compounds - Part 1: Designation System And Basis For Specifications |
JIS K 6833-1:2008
|
Adhesives - General testing methods Part 1: General properties |
JIS K 6859:1994
|
Testing methods for creep rupture of adhesive bonds |
JIS K 7071:1988
|
Testing methods for prepreg, carbon fiber and epoxy resins |