JIS K 7100:1999
Current
Current
The latest, up-to-date edition.
Plastics -- Standard atmospheres for conditioning and testing
Published date
31-10-1999
Publisher
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
Japanese Standards Association
|
| Status |
Current
|
| Standards | Relationship |
| ISO 1006:1983 | Identical |
99 [21/07/1999]81
| JIS T 9233:2025 | Testing methods for ostomy aids |
| JIS K 7193:2025 | Plastics-Determination of ignition temperature using a hot-air furnace |
| JIS A 1491-2:2025 | Method for convergence value evaluating long-term thermal insulation performance of building insulation materials-Part 2: Rigid foamed plastic insulations |
| JIS K 7126:1987 | Testing method for gas transmission rate through plastic film and sheeting |
| JIS K 7112-2:2023 | Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method |
| JIS K 7077:1991 | Testing method for charpy impact strength of carbon fiber reinforced plastics |
| JIS Z 1711:1994 | Polyethylene film bags |
| JIS K 7112:1999 | Plastics -- Methods of determining the density and relative density of non-cellular plastics |
| JIS K 6922-2:2005 | Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7195:1993 | Testing method for heat sag of plastics |
| JIS A 6024:2008 | Epoxy injection adhesives for repairing in buildings |
| JIS K 6854-4:1999 | Adhesives -- Determination of peel strength of bonded assemblies -- Part 4: Floating-roller method |
| JIS R 3913:2000 | Reinforcement products -- Determination of moisture content |
| JIS K 7121:1987 | Testing methods for transition temperatures of plastics |
| JIS K 7106:1995 | Testing method for stiffness of plastics by means of a cantilever beam |
| JIS K 7131:1994 | Testing method for thermally stimulated current of plastic films |
| JIS K 7384:2002 | Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method |
| JIS R 7606:2000 | Carbon fibre -- Determination of the tensile properties of the single-filament specimens |
| JIS R 3911:2000 | Reinforcement yarns -- Determination of linear density |
| JIS K 7079:1991 | Testing methods for in-plane shear properties of carbon fiber reinforced plastics by plus and minus 45 degrees tension method and two pairs of rails method |
| JIS K 6718-1:2000 | Plastics -- Poly (methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 1: Cast sheets |
| JIS K 7021:2007 | Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method |
| JIS K 6854-3:1999 | Adhesives -- Determination of peel strength of bonded assemblies -- Part 3: Adhesives -- 180 degree SIGN peel test for flexible-to-flexible bonded assemblies (T-peel test) |
| JIS K 6773:1999 | Polyvinylchloride waterstop |
| JIS K 7215:1986 | Testing methods for durometer hardness of plastics |
| JIS K 7142:2008 | Plastics -- Determination of refractive index |
| JIS K 6930:1994 | Reclaimed granular molding materials of agricultural polyvinyl chloride film |
| JIS Z 1714:1997 | Biaxially oriented nylon films for packaging |
| TS K 0005:2008 | Plastics -- Determination of transition temperatures with dynamic mechanical analysis |
| JIS K 7062:1992 | Testing method for izod impact strength of glass fiber reinforced plastics |
| JIS C 2161:1997 | Test methods of coating powders for electrical insulation |
| JIS K 6735:2006 | Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics |
| JIS K 7072:1991 | Preparation of carbon fibre reinforced plastic panels for test purpose |
| JIS Z 1715:1997 | Biaxially oriented polyethylene terephthalate (PET) films for packaging |
| JIS K 7129:1992 | Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method) |
| JIS K 7223:1996 | Testing method for water absorption capacity of super absorbent polymers |
| JIS K 7088:1996 | Testing methods for flexural creep of carbon fibre reinforced plastics |
| JIS K 7018:1999 | Fiber-reinforced plastic composites -- Determination of compressive properties in the in-plane direction |
| TR K 0005:2001 | Plastics -- Determination of transition temperatures with dynamic mechanical analysis |
| JIS K 7225:2005 | Rigid cellular plastics -- Determination of water vapour transmission properties |
| JIS K 7120:1987 | Testing methods of plastics by thermogravimetry |
| JIS Z 1707:1997 | General rules of plastic films for food packaging |
| JIS R 7609:2007 | Carbon fibre -- Determination of volume resistivity |
| JIS K 6745:2008 | Plastics -- Unplasticized poly (vinyl chloride) sheets |
| JIS K 7202-2:2001 | Plastics -- Determination of hardness -- Part 2: Rockwell hardness |
| JIS K 7221-1:2006 | Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test |
| JIS K 6746:2004 | Plastic welding rods |
| JIS A 6024:1998 | Epoxy injection adhesives for repairing in buildings |
| JIS K 7017:1999 | Fibre-reinforced plastics composites -- Determination of flexural properties |
| JIS K 7117:1987 | Testing methods for viscosity with a rotational viscometer of resins in the liquid form |
| JIS K 6883:2008 | Plastics -- Perfluoroalkoxyalkane (PFA) tubes |
| JIS A 5550:2003 | Adhesives for floor joist |
| JIS R 3912:2000 | Reinforcement yarns -- Determination of twist |
| JIS S 6032:2004 | Plastics rulers |
| JIS K 7082:1993 | Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics |
| JIS K 7141-3:2002 | Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties |
| JIS R 1659:2003 | Testing methods for elastic modulus of porous fine ceramics |
| JIS K 7224:1996 | Testing method for water absorption rate of super absorbent polymers |
| JIS K 7202:1995 | Method of rockwell hardness test for plastics |
| JIS Z 0238:1998 | Testing methods for heat sealed flexible packages |
| JIS K 6936-2:2007 | Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS C 60695-11-10:2006 | Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods |
| JIS K 6915-2:2006 | Plastics -- Phenolic moulding compounds -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7197:1991 | Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis |
| JIS S 2048:2006 | Portable cooling boxes |
| JIS K 7375:2008 | Plastics -- Determination of total luminous transmittance and reflectance |
| TR K 0006:2002 | Plastics -- Determination of the thermal properties in between room temperature and decomposition and/or vaporization temperature |
| JIS Z 1712:1997 | Oriented polypropylene films for packaging |
| JIS K 7193:1999 | Plastics -- Determination of ignition temperature using a hot-air furnace |
| JIS A 5536:2007 | Adhesives for resilient floorcoverings and woody floorings |
| JIS K 7171:2008 | Plastics -- Determination of flexural properties |
| JIS K 7089:1996 | Testing method for compression after impact properties of carbon fibre reinforced plastics |
| JIS K 7080:1991 | Testing methods for bearing strength of carbon fiber reinforced plastics |
| JIS A 5547:2003 | Adhesives for preformed cellular plastics thermal insulation board |
| JIS K 7203:1995 | Testing method for flexural properties of rigid plastics |
| JIS A 5557:2006 | Organic adhesives for exterior tile finishing |
| TR K 0008:2003 | Plastics -- Determination of dynamic mechanical properties by compression vibration method |
| JIS K 7141-2:2006 | Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties |
| JIS K 7019:1999 | Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method |
| JIS K 7383:2002 | Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method |
| JIS R 1657:2003 | Testing methods of continuous ceramic fibers for continuous fiber-reinforced ceramic matrix composites |
| JIS K 6917-2:2006 | Plastics -- Melamine-formaldehyde moulding compounds -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7390:2003 | Testing methods for reclaimed poly(ethylene terephthalate) (PET) moulding materials from PET bottle |
| JIS K 6734:2000 | Plastics -- Unplasticized poly (vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm |
| JIS Z 1716:2004 | Non-oriented polyethylene terephthalate (PET) sheets and films for packaging |
| JIS Z 1702:1994 | Polyethylene films for packaging |
| JIS K 7083:1993 | Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics |
| JIS K 7111:1996 | Plastics -- Determination of charpy impact strength |
| JIS K 7373:2006 | Plastics -- Determination of yellowness index and change of yellowness index |
| JIS K 7074:1988 | Testing methods for flexural properties of carbon fiber reinforced plastics |
| JIS R 7608:2007 | Carbon fibre -- Determination of tensile properties of resin-impregnated yarn |
| JIS K 7078:1991 | Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method |
| JIS K 7194:1994 | Testing method for resistivity of conductive plastics with a four-point probe array |
| JIS K 7073:1988 | Testing method for tensile properties of carbon fiber reinforced plastics |
| JIS K 7087:1996 | Testing methods for tensile creep of carbon fibre reinforced plastics |
| JIS A 5538:2003 | Adhesives for wall and ceiling boards |
| JIS K 6921-2:2005 | Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 6848-1:1999 | Adhesives -- Testing methods of bonding strength of adhesives -- Part 1: General principles |
| JIS A 9511:2006 | Preformed cellular plastics thermal insulation materials |
| JIS Z 1655:1993 | Plastic returnable containers |
| TS K 0008:2008 | Plastics -- Determination of dynamic mechanical properties by compression vibration method |
| JIS K 6767:1999 | Cellular plastics -- Polyethylene -- Methods of test |
| JIS K 7110:1999 | Plastics -- Determination of Izod impact strength |
| JIS K 7142:1996 | Determination of the refractive index of plastics |
| JIS K 7086:1993 | Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics |
| JIS K 7340:2006 | Plastics -- Vertical flame spread determination for film and sheet |
| JIS K 6850:1999 | Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| JIS K 7114:2001 | Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals |
| JIS K 7061:1992 | Testing method for charpy impact strength of glass fiber reinforced plastics |
| JIS K 6768:1999 | Plastics -- Film and sheeting -- Determination of wetting tension |
| JIS K 7364-2:2004 | Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7218:1986 | Testing methods for sliding wear resistance of plastics |
| JIS K 7133:1999 | Plastics -- Film and sheeting -- Determination of dimensional change on heating |
| JIS K 7242-2:2008 | Plastic -- Smoke generation -- Part 2 : Determination of optical density by a single-chamber test Part 2 : Determination of optical density by a single-chamber test |
| JIS K 7111-1:2006 | Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test |
| JIS S 6051:2006 | Plastics card cases |
| JIS K 7196:1991 | Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis |
| JIS K 6863:1994 | Testing methods for the softening point of hot melt adhesives |
| JIS R 1644:2002 | Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites |
| JIS K 7241:2005 | Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| JIS K 7221-2:2006 | Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
| JIS C 60695-11-20:2006 | Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods |
| JIS K 7085:1993 | Testing method for multiaxial impact behaviour of carbon fibre reinforced plastics |
| JIS K 6862:1984 | Testing methods for melt viscosity of hot-melt adhesives |
| JIS K 7122:1987 | Testing methods for heat of transitions of plastics |
| JIS K 7123:1987 | Testing methods for specific heat capacity of plastics |
| JIS K 6937-2:2002 | Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7211-1:2006 | Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing |
| JIS K 6828:1996 | Testing methods for synthetic resin emulsions |
| JIS K 7075:1991 | Testing methods for carbon fiber content and void content of carbon fiber reinforced plastics |
| JIS Z 1713:1997 | Cast polypropylene films for packaging |
| JIS K 6718-2:2000 | Plastics -- Poly (methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Melt-calendered extruded sheets |
| JIS K 7315-2:2006 | Plastics -- Polyphenylene Sulfide (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7076:1991 | Testing methods for compressive properties of carbon fibre reinforced plastics |
| JIS K 7249:2006 | Rigid cellular plastics -- Determination of dimensional stability |
| JIS K 6916-2:2006 | Plastics -- Urea-formaldehyde moulding compounds -- Part 2: Preparation of test specimens and determination of properties |
| JIS K 7222:2005 | Cellular plastics and rubbers -- Determination of apparent (bulk) density |
| JIS K 7341:2006 | Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| JIS K 7313-2:2007 | Plastics -- Poly (phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
| JIS R 1678:2007 | Test method for open hole tension of continuous fiber-reinforced ceramic matrix composites at room temperature |
| JIS C 6481:1996 | Test methods of copper-clad laminates for printed wiring boards |
| JIS K 7016-4:2009 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
| JIS K 7128-3:1998 | Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3: Right angled tear method |
| JIS K 6854-2:1999 | Adhesives -- Determination of peel strength of bonded assemblies -- Part 2: 180 degree SIGN peel |
| JIS Z 0240:2002 | Structural cushioning materials for packaging -- Determination of cushioning performance |
| JIS T 9233:1997 | Testing methods for ostomy aids |
| JIS K 7214:1985 | Testing methods for shear strength of plastics by punch tool |
| JIS R 1703-1:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for self-cleaning performance of photocatalytic materials -- Part 1: Measurement of water contact angle Part 1: Measurement of water contact angle |
| JIS K 6919:1992 | Liquid unsaturated polyester resins for fiber reinforced plastics |
| JIS K 7311:1995 | Testing methods for thermoplastic polyurethane elastomers |
| JIS K 7092:2005 | Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen |
| JIS K 6833:1994 | General testing methods for adhesives |
| JIS Z 9107:2008 | Safety colours and safety signs -- Classification, performance and durability of safety signs |
| JIS A 9526:2006 | Spray-applied rigid polyurethane foam for thermal insulation |
| JIS K 6780:2003 | Profile wall polyethylene pipes |
| JIS A 5702:2007 | Rigid PVC corrugated sheets |
| JIS K 7140-2:2007 | Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics |
| JIS K 7140-2:2007 | Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics |
| JIS K 6854-1:1999 | Adhesives -- Determination of peel strength of bonded assemblies -- Part 1: 90 degree SIGN peel |
| JIS K 7084:1993 | Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test |
| JIS R 1703-2:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics ) -- Test method for self-cleaning performance of photocatalytic materials -- Part 2: Decomposition of wet methylene blue Part 2: Decomposition of wet methylene blue |
| TS C 60695-11-21:2008 | Fire hazard testing -- Part 11-21 : Test flames -- 500 W vertical flame test method for tubular polymeric materials |
| JIS K 6833-1:2008 | Adhesives -- General testing methods -- Part 1: General properties |
| JIS R 3420:2006 | Testing methods for textile glass products |
| JIS K 7071:1988 | Testing methods for prepreg, carbon fiber and epoxy resins |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.