JIS Z 8101-1:1999
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Statistics -- Vocabulary and symbols -- Part 1: Probability and general statistical terms Part 1: Probability and general statistical terms
Available format(s)
PDF
Language(s)
English
Published date
30-09-1999
Publisher
Withdrawn date
23-10-2025
Superseded by
€48.24
Excluding VAT
This Standard defines probability and general statistical terms which may be used in the drafting of Japanese Industrial Standards. In addition, it defines symbols for a limited number of these terms. The terms are classified under the following main headings: -- Terms used in the theory of probability -- General statistical terms
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
Japanese Standards Association
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| JIS B 7912-3:2006 | Field procedures for testing geodetic and surveying instruments -- Part 3: Theodolites |
| JIS Z 8301:2005 | Rules for the layout and drafting of Japanese Industrial Standards |
| JIS B 7912-6:2007 | Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers |
| JIS Z 8404-2:2008 | Measurement uncertainty -- Part 2: Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments |
| JIS K 7164:2005 | Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| JIS Z 9041-5:2003 | Statistical interpretation of data -- Part 5: Median -- Estimation and confidence intervals |
| JIS K 7165:2008 | Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| JIS Z 8402-1:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions |
| JIS Z 8402-5:2002 | Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| JIS Z 8405:2008 | Statistical methods for use in proficiency testing by interlaboratory comparisons |
| JIS Z 9010:1999 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| JIS C 5750-3-5:2006 | Dependability management -- Part 3-5: Application guide -- Reliability test conditions and statistical test principles |
| JIS Z 9041-3:1999 | Statistical interpretation of data -- Part 3: Tests and confidence intervals relating to proportions Part 3: Tests and confidence intervals relating to proportions |
| JIS Q 0033:2002 | Uses of certified reference materials |
| JIS Z 8402-4:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| JIS R 1674:2007 | Statistical analysis for influence of machining damage on strength of fine ceramics |
| JIS Z 9041-1:1999 | Statistical interpretation of data -- Part 1: Statistical presentation of data Part 1: Statistical presentation of data |
| JIS B 9918-2:2008 | Cleanrooms and associated controlled environments -- Biocontamination control -- Part 2: Evaluation and interpretation of biocontamination data |
| JIS B 7912-1:2004 | Field procedures for testing geodetic and surveying instruments -- Part 1: Theory |
| JIS B 7912-4:2006 | Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM instruments) |
| JIS Z 9015-1:2006 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| JIS Z 8402-2:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| JIS Z 8462-2:2003 | Capability of detection -- Part 2: Methodology in the linear calibration case Part 2: Methodology in the linear calibration case |
| JIS Z 9041-2:1999 | Statistical interpretation of data Part 2: Techniques of estimation and test relating to means and variances |
| JIS Z 9020:1999 | Control Charts -- General guide and introduction |
| JIS Z 9015-0:1999 | Sampling procedures for inspection by attributes -- Part 0: Introduction to the JIS Z 9015 attribute sampling system Part 0: Introduction to the JIS Z 9015 attribute sampling system |
| JIS Z 8402-6:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values |
| JIS Z 8404-1:2006 | Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| JIS Z 9015-3:1999 | Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures Part 3: Skip-lot sampling procedures |
| JIS Z 9009:1999 | Sequential sampling plans for inspection by attributes |
| JIS Z 8461:2001 | Linear calibration using reference materials |
| JIS Z 8462-4:2006 | Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value Part 4: Methodology for comparing the minimum detectable value with a given value |
| JIS Z 8462-3:2006 | Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| JIS B 7912-2:2006 | Field procedures for testing geodetic and surveying instruments -- Part 2: Levels |
| JIS Z 8816:2001 | Particulate materials -- General requirements for methods of sampling |
| JIS Z 9031:2001 | Procedure for random number generation and randomization |
| JIS R 1703-1:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for self-cleaning performance of photocatalytic materials -- Part 1: Measurement of water contact angle Part 1: Measurement of water contact angle |
| JIS Q 0035:2008 | Reference materials -- General and statistical principles for certification |
| JIS Z 8402-3:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method Part 3: Intermediate measures of the precision of a standard measurement method |
| JIS B 9920:2002 | Classification of air cleanliness for cleanrooms |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.