MIL-B-23964 Revision D:1981
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Bolt, Self-Retaining, Positive Locking (S/S by NASM23964)
Available format(s)
PDF
Published date
05-06-1981
Publisher
Superseded date
25-05-2000
€16.67
Excluding VAT
1 SCOPE
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PACKAGING
6 NOTES
Describes positive locking self-retaining bolts.
| DevelopmentNote |
D NOTICE 1 - Notice of Cancellation/Superseded by NASM 23964 (06/2004)
|
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-A-81973 Base Document:1974 | Aircrew Automated Escape Systems, Test Vehicles for Ground Track Performance Testing, Rocket and/or Jet Engine Propelled, General Specification for (No S/S Document) |
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| MS3369 Revision D:1985 | BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU, 63 KSI FTU, HEXAGON SLOTTED HEAD, 450 DEG. F AND 650 DEG F. (S/S BY NASM3369) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS5699G | Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable |
| MS20002 Revision E:1972 | WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH (S/S BY NASM20002) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-H-6875 Revision H:1989 | Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875) |
| MS21244 Revision B:1981 | NUT, CASTELLATED, HEXAGON, COUNTERBORED ASSEMBLED WASHER, 450 DEG. F (FOR SELF RETAINING BOLTS) (S/S BY NASM21244) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL B 121 : F | BARRIER MATERIAL, GREASEPROOFED, WATERPROOFED, FLEXIBLE |
| SAE AMS5629H | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| MIL-STD-6866 Base Document:1985 | Inspection, Liquid Penetrant (S/S by ASTM-E1417) |
| MS21224 Revision D:1993 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED, ASSEMBLED WASHER, 250 DEG. F, NON-METALLIC INSERT (FOR SELF-RETAINING BOLTS) (S/S BY NASM21224) |
| PPP-H-1581 Revision A:1977 | Hardware (Fasteners and Related Items), Packaging of (S/S by ASTM-D3951 or Mil-Std-2073-) |
| AN320 Revision 14:1996 | NUT, PLAIN, CASTELLATED, SHEAR (S/S BY NASM320) |
| MIL-S-8879 Revision C:1991 | Screw Threads, Controlled Radius Root withIncreased Minor Diameter, General Specification for (S/S by SAE-AS8879) |
| MS21130 Revision E:1981 | BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU, 63 KSI FTU, 100 DEG. FLUSH HEAD, 450 DEG. F AND 650 DEG. F (S/S BY NASM21130) |
| MS17826 Revision H:1988 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON 250 DEG. F, THIN NON-METALLIC INSERT |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| QQ-W-390 Revision C:1970 | WIRE, NICKEL-CHROMIUM-IRON ALLOY (S/S BY ASTM-B166) |
| MS17825 Revision J:2011 | Nut, Self-Locking, Castellated, Hexagon, 250 Degrees F Non-Metallic Insert |
| SAE AMS5678F | Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| SAE AMS5834D | Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Cold Drawn, and Aged |
| SAE AMS5833D | Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold Drawn |
| SAE AMS4967L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
| MS21125 Revision F:1983 | BOLT, SELF RETAINING, POSITIVE LOCKING, CRES 90 KSI FSU, 63 KSI FTU, PAN HEAD, 450 DEG. F AND 650 DEG. F (S/S BY NASM21125) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.