MIL C 15370 : F
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR
Available format(s)
PDF
Language(s)
English
Publisher
Superseded date
24-01-2002
Superseded by
€16.67
Excluding VAT
Covers general requirements for directional couplers. Used for Armed Services application in the transmission lines of radar and radio equipment to inject or sample, at attenuated levels, radio frequency energy transmitted. Suitable for operation over a temperature range of -65 deg to +95 deg C.
| Committee |
FSC 5985
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-STD-242-11 Revision G:1983 | ELECTRONIC EQUIPMENT PARTS SELECTED STANDARDS, RADIO FREQUENCY COMPONENTS (NO S/S DOCUMENT) |
| MIL-STD-1328 Revision C:1989 | COUPLERS, DIRECTIONAL SELECTION OF (NO S/S DOCUMENT) |
| MIL-R-24358 Base Document:1968 | RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE (S/S BY MIL-STD-2110) |
| MIL-STD-35-75 Base Document:1974 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM MICROWAVE/WAVEGUIDE COMPONENTS (NO S/S DOCUMENT) |
| MIL-H-28719 Base Document:1970 | Header, Hermetically Sealed (No S/S Document) |
| MIL-I-23011 Revision C:1974 | Iron Nickel Alloys for Sealing to Glasses and Ceramics (S/S by SAE-AMS-I-23011) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-P-24691-3 Base Document:1987 | Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| QQ-A-225 Revision G:1990 | ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED; GENERAL SPECIFICATION FOR (S/S BY ASTM-B211 AND SAE-AMS-QQ-A-225) |
| PPP-B-636 Revision J:1981 | Boxes, Shipping, Fiberboard (S/S by ASTM-D1974 and ASTM-D5118) |
| QQ-A-200 Revision E:1980 | Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube and Wire, Extruded; General Specification for (Refer to ASTM-B241/B241M, ASTM-B221, ASTM-B308/B308M and SAE-AMS-QQ-A-200) |
| MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
| MIL-STD-147 Revision E:2008 | Palletized Unit Loads |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| MIL-M-3171 Revision C:1966 | Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on (S/S by SAE-AMS-M-3171) |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| PPP-B-566 Revision E:1974 | Boxes, Folding, Paperboard |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-P-45209 Revision B:1981 | Palladium Plating, Electrodeposited (S/S By ASTM-B679) |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| QQ-B-626 Revision D:1973 | Brass, Leaded and Nonleaded: Rod, Shapes, Forgings, and Flat Products with Finished Edges (Bar and Strip) (S/S by ASTM-B121, ASTM-B36, ASTM-B16, ASTM-B16M, AND ASTM-B124) |
| MIL-STD-45662 Revision A:1988 | Calibration Systems Requirements (Refer to ISO-10012-1 and ANSI-Z540-1 or Comparable Standards as Alternatives to MIL-STD-45662) |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL C 39012 : C | GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS |
| MIL-T-10727 Revision C:1989 | TIN PLATING: ELECTRODEPOSITED OR HOT-DIPPED, FOR FERROUS AND NONFERROUS METALS (S/S BY ASTM-B545, ASTM-B339) |
| QQ-S-365 Revision D:1985 | SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR (USERS MAY CONSULT ASTM-B700) |
| QQ-C-530 Revision C:1971 | COPPER-BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173) (S/S BY ASTM-B196, ASTM-B197, AND ASTM-B194) |
| QQ-A-596 Revision E:1981 | Aluminum Alloy Permanent and Semipermanent Mold Castings (S/S by ASTM-B108) |
| PPP-B-676 Revision E:1992 | Boxes, Setup |
| MIL G 45204 : C | GOLD PLATING, ELECTRODEPOSITED |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| QQ-C-533 Revision B:1972 | Copper-Beryllium Alloy Strip (Copper Numbers 170 and 172) (S/S by ASTM-B194) |
| QQ-B-613 Revision D:1973 | Brass, Leaded and Nonleaded :Flat Products (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B36 and ASTM-B121) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| QQ-A-591 Revision F:1981 | Aluminum Alloy Die Castings (S/S by Appropriate Portions of the Document ASTM-B85, ASTM-B26, ASTM-B108 and SAE-J452, SAE-J453, SAE-AMS4290, SAE-AMS4291) |
| ASTM D 1710 : 2015 : REDLINE | Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF (S/S BY MIL-STD-2073-1) |
| QQ-A-601 Revision F:1981 | Aluminum Alloy Sand Castings (S/S by ASTM-B26/B26M) |
| QQ-M-44 Revision B:1964 | Magnesium Alloy Plate and Sheet ( AZ31B) (S/S byAMS4375, AMS4377 and AMS4376) |
| MIL-P-27418 Base Document:1967 | Plating, Soft Nickel (Electrodeposited, Sulfamate Bath) |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR (S/S BY A-A-59126) |
| MIL-B-5087 Revision B:1964 | Bonding, Electrical, and Lightning Protection, for Aerospace Systems (S/S by MIL-STD-464) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.