MIL C 15730 : M
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
Available format(s)
PDF
Superseded date
30-01-2024
Publisher
Covers lubricating oil, hydraulic oil and fresh water coolers for Naval shipboard applications.
Committee |
FSC 4420
|
DocumentType |
Standard
|
Pages |
72
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
SupersededBy |
MIL G 2145 : A NOTICE 1 | GENERATOR SET, GASOLINE ENGINE DRIVEN, DIRECT AND ALTERNATING CURRENT [NAVAL SHIPBOARD USE] |
MIL-C-18419 Revision B:1962 | COMPRESSORS, RECIPROCATING, MOTOR DRIVEN, NAVAL SHIPBOARD HIGH PRESSURE AIR SERVICE |
MIL-E-17341 Revision C:1970 | ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
DOD-P-24562 Revision A:1982 | PROPELLERS, SHIP, CONTROLLABLE PITCH (METRIC) |
MIL-G-24260 Base Document:1967 | GENERATOR SET, DIESEL ENGINE, 100 KW, 120-VOLT D.C., 1800 R.P.M. |
MIL-T-17523 Revision D:1976 | TURBINE, STEAM, AUXILIARY (AND REDUCTION GEAR) MECHANICAL DRIVE |
MIL-G-22997 Revision A:1965 | GENERATOR SET, DIESEL ENGINE, 1OO KW, 45O-VOLT A.C., 6O-CYCLE, 18OO R.P.M. |
MIL-G-22077 Revision C:1993 | GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE |
MIL-G-15788 Revision B:1964 | GENERATOR SET, DIESEL ENGINE, 60KW, 450 VOLT AC, 60 CYCLE, 1800 R.P.M. |
MIL-C-23961 Revision A:1965 | COMPRESSORS, HIGH PRESSURE AIR, 100 C.F.M., NAVAL SHIPBOARD SERVICE |
MIL G 24197 : NOTICE 2 | GENERATOR SET, DIESEL ENGINE 25O KW, ALTERNATING CURRENT |
MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
MIL-V-24439 Revision A:1984 | VALVE, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES |
MIL-W-21965 Revision D:1988 | WATER COOLING OF SHIPBOARD ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
MIL-G-19287 Revision C:1961 | GENERATOR SET, STREAM TURBINE, 2500KW, 450 VOLT, 60 CYCLE, AC |
MIL-G-22665 Base Document:1960 | GENERATOR SET, STEAM TURBINE, 15OO KW, 45O VOLT, 6O CYCLE, AC |
MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
ASTM A 569/A569M : 1998 | Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000) |
MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
MIL-E-15809 Revision D:1992 | EXPANDER, TUBE, CONDENSER AND HEAT EXCHANGERS |
MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING, AND WATERPROOFING, WITH APPROPRIATE TEST METHODS |
MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
DOD-STD-1399-301 Revision A:1986 | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 301A SHIP MOTION AND ATTITUDE (METRIC) |
MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
MIL-A-19521 Revision B:1992 | ANODE RETAINING SUPPORT PLUGS AND ANODE SELECTION AND INSTALLATION DESIGN CRITERIA FOR SHIPBOARD CONDENSERS AND HEAT EXCHANGERS |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
MIL-P-24691-1 Base Document:1987 | Pipe And Tube, Carbon Steel, Seamless |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
MIL A 18001 : K | ANODES, SACRIFICIAL ZINC ALLOY |
MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
MIL-STD-438 Revision E:1973 | SCHEDULE OF PIPING VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR SUBMARINES SERVICE |
MIL-G-21610 Revision C:1989 | GASKETS, HEAT EXCHANGER, VARIOUS CROSS SECTION RINGS, SYNTHETIC RUBBER |
MIL C 24707/1 : 0 | CASTINGS, FERROUS, FOR MACHINERY AND STRUCTURAL APPLICATIONS |
MIL G 24696 : B | GASKET, SHEET, NON-ASBESTOS |
MIL-B-24480 Revision A:1985 | BRONZE, NICKEL-ALUMINUM CASTINGS FOR SEAWATER SERVICE |
MIL-T-15005 Revision F:1989 | TUBE, 70-30 AND 90-10 COPPER NICKEL ALLOY, CONDENSER AND HEAT EXCHANGER |
ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD |
MS16142 Revision C:1979 | BOSS GASKET SEAL STRAIGHT THREAD TUBE FITTING STANDARD DIMENSIONS FOR |
MIL-L-24478 Revision C:1990 | LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL |
MIL-T-22214 Revision C:1993 | TUBE, CONDENSER AND HEAT EXCHANGER WITH INTEGRAL FINS (UNS ALLOY NOS. C715OO, C7O6OO, C122OO) |
MIL-STD-1627 Revision C:1994 | BENDING OF PIPE OR TUBE FOR SHIP PIPING SYSTEMS |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
MIL N 24106 : C | NICKEL-COPPER ALLOY BARS, RODS AND FORGINGS |
MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
MIL-P-15024-5 Base Document:1971 | PLATE, IDENTIFICATION |
MIL G 1149 : C | GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS |
TEMA STANDARDS : 9ED 2007 | STANDARDS OF THE TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION |
TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C) |
FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
MIL-T-24107 Revision B:1987 | TUBE, COPPER (SEAMLESS) (COPPER ALLOY NUMBERS C10100, C10200, C10300, C10800, C12000, C12200 AND C14200) |
MIL-STD-22 Revision D:1979 | WELDED JOINT DESIGN |
MIL-L-24479 Revision C:1990 | LUBRICANT, RED LEAD AND GRAPHITE IN MINERAL OIL |
MIL A 907 : E | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
ASTM B 248 : 2017 : REDLINE | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
MIL-C-15726 Revision F:1988 | COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE |
ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
ASTM B 122/B122M : 2016 : REDLINE | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.