Skip to content
Please enter a keyword to search

  • MIL-DTL-1222 Revision J:2000

    Current The latest, up-to-date edition.

    STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR

    Available format(s):  PDF

    Language(s):  English

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/2 inch to 4 inches, nuts in nominal standard diameters of 1/2 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/2 inch to 1 1/2 inches for submarine safety and other applications where a high degree of reliability is required.

    General Product Information - (Show below) - (Hide below)

    Committee FSC 53GP
    Development Note Supersedes MIL S 1222 (H) (05/2001)
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-24509 Revision B:2017 Valves, Flanged, Balland Plugfor Sewageand Seawater Service
    MIL-DTL-24749 Revision B:2014 GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC
    MIL-DTL-24696 Revision C:2008 GASKET, SHEET, NON-ASBESTOS
    MIL-DTL-18030 Revision F:2018 Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation)
    MIL-DTL-17060 Revision G:2009 MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
    MIL-DTL-16356 Revision E:2013 GAUGES, DIRECT READING, OBLONG GLASS
    MIL-DTL-24151 Revision B:2016 DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
    MIL-DTL-32483 Base Document:2013 Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard
    MIL-DTL-3124 Revision E:2014 GENERATOR, ALTERNATING CURRENT, 60-HERTZ (NAVAL SHIPBOARD USE)
    MIL B 18 : F BATTERIES, NON-RECHARGEABLE, DRY
    MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
    MIL-DTL-32525 Base Document:2016 MAGAZINE, PORTABLE (SHIPBOARD)
    MIL-DTL-16036 Revision M:2013 SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD
    MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
    MIL-DTL-24299 Revision B:2017 HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD
    MIL-DTL-16556 Revision F:2017 Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use )
    MIL-DTL-24223 Revision D:2014 LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS
    MIL-PRF-32407 Revision A:2016 MOUNTS, RESILIENT (SURFACE SHIP APPLICATION)
    MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
    MIL-PRF-907 Revision F:2004 ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE
    MIL-DTL-16034 Revision B:2008 METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR
    MIL-STD-1310 Revision H:2009 SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY
    MIL-DTL-18110 Revision G:2018 VALVES, GATE TYPE, STEEL SIZES 2[1/2] INCHES TO 16 INCHES
    MIL-PRF-32187 Revision A:2017 Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use
    MIL-B-49030 Revision A:2010 BATTERIES, DRY (ALKALINE)
    MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
    MIL-R-19309 Revision D:2003 RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2)
    MIL-DTL-901 Revision E:2017 Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for
    MIL-DTL-17557 Revision F:2013 Coolers, Fluid, Industrial, Naval Shipboard (Sample Water Coolers)
    MIL-DTL-17840 Revision D:2018 PUMPS, CENTRIFUGAL, CLOSE-COUPLED, NAVY STANDARD (FOR SURFACE SHIP APPLICATION)
    SAE AMS 3050 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE
    MIL-DTL-17849 Revision F:2018 Strainers, Sediment, Pipeline, Duplex (with and without Magnet)
    MIL-DTL-23928 Revision G:2014 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
    MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
    MIL-STD-202-207 Base Document:2015 METHOD 207, HIGH IMPACT SHOCK
    MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS

    Standards Referencing This Book - (Show below) - (Hide below)

    ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
    MIL-F-8961 Revision A:1992 FASTENER ELEMENT, SELF-LOCKING, EXTERNALLY THREADED, 450 DEGREE F AND 1,200 DEGREE F
    DOD-PRF-24648 Base Document:1985 PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC)
    ASME B1.12 : 1987 CLASS 5 INTERFERENCE-FIT THREAD
    QQ-N-286 Revision G:2000 NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500)
    ASTM B 348 : 2013 : REDLINE Standard Specification for Titanium and Titanium Alloy Bars and Billets
    SAE AMS 2488 : 2000 ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
    ASTM F 593 : 2017 : REDLINE Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
    SAE J 429 : 2014 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
    MIL-STD-1684 Revision D:1997 CONTROL OF HEAT TREATMENT
    MIL-STD-792 Revision F:2006 IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS
    ASTM A 380 : 2006 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
    MIL-DTL-25027 Revision H:1997 NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F
    NASM1312:2012 FASTENER TEST METHODS METHOD 11 TENSION FATIGUE
    SAE AMS 2750 : 2012 PYROMETRY
    MIL-DTL-83488 Revision D:1999 COATING, ALUMINUM, HIGH PURITY
    NAVSEA T9074 AS GIB 010/271 : 0 REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS
    MIL-PRF-81329 Revision E:2015 LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737
    SAE AMS 2631 : 2011 ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE
    SAE J 121 : 2013 DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
    SAE J 123 : 2012 SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS
    ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
    ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
    ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
    SAE J 122 : 2017 SURFACE DISCONTINUITIES ON NUTS
    ASTM A 574 : 2017 : REDLINE Standard Specification for Alloy Steel Socket-Head Cap Screws
    MIL-DTL-18240 Revision F:1997 FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM
    MIL L 46010 : D LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
    TT-C-490 Revision F:2013 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS)
    SAE J 995 : 2012 MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective