• There are no items in your cart

MIL-DTL-24800 Base Document:1996

Current

Current

The latest, up-to-date edition.

CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS

Available format(s)

PDF

Language(s)

English

Establishes requirements for an aqueous, inorganic cleaning compound to be used in immersion, ultrasonic, spray and pumped cleaning of oxygen system piping and components.

Committee
FSC 6850
DocumentType
Standard
Pages
33
PublisherName
US Military Specs/Standards/Handbooks
Status
Current

MIL-STD-1330 Revision D:1996 STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
DEFSTAN 68-278/1(2007) : 2007 CLEANING PROCEDURES AND STANDARDS FOR DIVING AND MARINE OXYGEN SYSTEM COMPONENTS
MIL-STD-1622 Revision B:1999 STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS
DEFSTAN 68-278/2(2016) : 2016 CLEANING PROCEDURES & STANDARDS FOR NAVAL OXYGEN SYSTEM COMPONENTS

MIL-R-83248 Revision C:1994 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
DOD L 24574 : (1) LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES
ASTM D 2287 : 2012 : REDLINE Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
QQ-N-286 Revision G:2000 NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500)
MIL-P-24691-3 Base Document:1987 Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded
ASTM D 512 : 2012 Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
MIL P 5516 : C PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F
ASTM B 265 : 2015 : REDLINE Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
MIL G 27617 : E GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D 2116 : 2016 : REDLINE Standard Specification for FEP Resin Molding and Extrusion Materials
MIL R 6855 : E RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
ASTM D 543 : 2014 : REDLINE Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
MIL-S-23008 Revision D:1988 STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH ((HY-80 AND HY-100)
ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM G 72 : 2001 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
MIL L 9000 : H LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL
QQ-B-654 Revision A:1980 BRAZING ALLOY, SILVER
ASTM E 70 TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
ASTM D 1292 : 2015 : REDLINE Standard Test Method for Odor in Water
ASTM D 1331 : 2014 : REDLINE Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D 4779 : 1993 Standard Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection (Withdrawn 2002)
ASTM D 3935 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 3921 : 1996 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
MIL-S-21923 Base Document:1959 SYNTHETIC RUBBER COMPOUND, BUTADIENE STYRENE TYPE, OZONE RESISTANT, FOR LOW TEMPERATURE SERVICE
MIL-P-24691 Base Document:1987 PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR
ASTM D 1457 : 1992 Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
MIL H 17672 : D HYDRAULIC FLUID, PETROLEUM, INHIBITED
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
A-A-50433 Base Document:1989 GREASE, SEA WATER WASH RESISTANT
QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
MIL-S-8660 Revision C:1983 SILICONE COMPOUND, NATO CODE NUMBER S 736
ASTM D 2512 : 2017 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
MIL-P-83461 Revision B:1980 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MIL-T-24107 Revision B:1987 TUBE, COPPER (SEAMLESS) (COPPER ALLOY NUMBERS C10100, C10200, C10300, C10800, C12000, C12200 AND C14200)
MIL G 22050 : D GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES
ASTM D 1280 : 2014 : REDLINE Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
MIL F 22606 : C FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN
MIL-STD-1330 Revision D:1996 STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 2579 : 1993 : EDT 1 Standard Test Method for Total Organic Carbon in Water (Withdrawn 2002)
MIL-C-15726 Revision F:1988 COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE
ASTM D 1784 : 2011 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
MIL P 5425 : D PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT

€17.95
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.