MIL-DTL-25666 Revision F:1995
Current
The latest, up-to-date edition.
Converter, Liquid Oxygen, Capacitance Type Gauging, General Specification for
15-09-1995
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Covers liquid oxygen converters that will store liquid oxygen on board an aircraft and will convert the liquid oxygen to gas as required to supply the oxygen regulators.
| DevelopmentNote |
Supersedes MIL C 25666 (E). F NOTICE 1 - Notice of Inactivation for New Design. (06/2004) F NOTICE 2 - Notice of Validation but remains Inactive for New Design. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for liquid oxygen converters that will store liquid oxygen on board an aircraft and that will convert the liquid oxygen to gas as required to supply the oxygen regulators. It includes converters of various capacities and operating pressures with either integral warming coils or separate aircraft installed warming coils. Provisions for quick-change installation in aircraft or permanent installation in aircraft are included.
| MIL-DTL-25666-6 Base Document:1980 | Converter, Liquid Oxygen GCU-20/A |
| MIL-DTL-25666-3 Base Document:1995 | Converter, Liquid Oxygen GCU-10/A (No S/S Document) |
| MIL-DTL-25666-1 Base Document:1971 | Converter, Liquid Oxygen GCU-2A/A |
| MIL-DTL-25666-5 Base Document:1978 | Converter, Liquid Oxygen Type GCU-17/A |
| MIL-DTL-25666-4 Base Document:1971 | Converter, Liquid Oxygen, GCU-12A/A |
| MIL-DTL-25666-2 Base Document:1995 | Converter, Liquid Oxygen GCU-3/A (No S/S Document) |
| MIL-DTL-25666-7 Base Document:1995 | Converter, Liquid Oxygen Type ME-3 |
| MIL-STD-1359 Revision B:1987 | CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT (S/S BY SAE-ARP1176) |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-P-7105 Revision B:1965 | PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT, GENERAL REQUIREMENTS FOR (S/S BY SAE-AS71051) |
| MIL O 27210 : F | OXYGEN, AVIATOR'S BREATHING, LIQUID AND GAS |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| BB-N-411 Revision C:1973 | Nitrogen, Technical (S/S by A-A-59503 and A-A-59155) |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-D-19326 Revision H:1990 | Design and Installation of Liquid Oxygen Systems in Aircraft, General Specification for |
| MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MS33583 Revision C:1993 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR (S/S BY SAE-AS33583) |
| MIL-I-25645 Revision D:1970 | Indicator, Liquid Oxygen Quantity, Capacitance Type, General Specification for |
| MS33584 Revision C:1990 | TUBING END STANDARD DIMENSIONS FOR FLARED (S/S BY SAE-AS4330) |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| MIL V 38201 : C (3) | VALVE, FILLER, LIQUID OXYGEN FEMALE CRU 59/E |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS (S/S BY ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M, AND ASME-14.34M) |
| ASTM D 2512 : 2017 | Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023) |
| MIL-STD-721 Revision C:1981 | DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY (NO S/S DOCUMENT) |
| MIL V 9050 : E (1) | VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT |
| MIL-T-27730 Revision A:1964 | TAPE, ANTISEIZE, TETRAFLUOROETHYLENE, WITH DISPENSER (S/S BY A-A-58092) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| MIL-STD-781 Revision D:1986 | RELIABILITY TESTING FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.