MIL-DTL-27267 Revision D:2012
Current
Current
The latest, up-to-date edition.
Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure
Available format(s)
PDF
Published date
09-01-2012
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for a hose, CRES reinforced, polytetrafluoroethylene, 450 degrees F, medium pressure.
| DevelopmentNote |
Supersedes MIL H 27267 (10/2003)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for a hose, CRES reinforced, polytetrafluoroethylene, 450°F, medium pressure (see 3.5.1).
| MS27057 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27385 Revision C:2013 | Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27382 Revision C:2013 | Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut |
| MS27381 Revision C:2013 | Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut |
| MS27060 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut |
| MS27383 Revision C:2014 | Adapter Assembly, Flareless, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27056 Revision E:2013 | Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose |
| MIL-DTL-2726-1 Revision C:2006 | Receptacle, Plug, Electrical, 2-Pin, 40-Ampere, 125-Volt, Direct Current (Symbol No. 715.1) |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MS8003 Revision E:2016 | Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange |
| MS8001 Revision E:2016 | Hose Assembly, Polyetrafluorothylene, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless |
| MIL-STD-1353 Revision C:2014 | Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MS27055 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MIL-DTL-22438-2 Revision C:2012 | Panel, Receptacle, Enclosed, Electrical and Electronic (Symbol No. 755.3) |
| MS8002 Revision E:2016 | Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-to-Flange |
| MS8000 Revision E:2016 | Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-to-Flare |
| MS27058 Revision E:2013 | Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose |
| MS27384 Revision C:2014 | Adapter Assembly, Flareless, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS8004 Revision E:2016 | Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flange-to-Flange |
| MS27053 Revision E:2013 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| MS27054 Revision E:2013 | Adapter Assembly, Straight, Swivel Flange to Hose |
| MS27059 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| SAE ARP4752B | Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| SAE ARP1153A | Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MIL-PRF-680 Revision C:2010 | Degreasing Solvent |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| SAE AS2078A | Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE) |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.