|
SAE AMS 2486 : 2010
|
CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
SAE AS 5309 : 2015
|
FITTING END, SPHERICAL, 37 DEGREE FLARED TUBE CONNECTION DESIGN STANDARD |
|
SAE AMS 5645 : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
|
SAE AMS QQ A 225/9 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS QQ P 416 : 2016
|
PLATING, CADMIUM (ELECTRODEPOSITED) |
|
MIL-STD-130 Revision N:2007
|
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
|
SAE J 2658 : 2013
|
CARBON AND STEEL ALLOY TUBE CONDUCTOR ASSEMBLIES FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER METALLIC TUBE ASSEMBLIES |
|
SAE AMS 2488 : 2000
|
ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
|
MIL-DTL-16232 Revision G:2000
|
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
|
MIL-PRF-7808 Revision L:1997
|
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
|
ANSI/NCSL Z540 3 : 2006(R2013)
|
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
|
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
|
SAE AMS 6382 : 2014
|
STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
|
SAE AMS 5643 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AS 4395 : 2013
|
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
|
SAE AMS 5743 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
|
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials |
|
SAE AMS QQ A 200/8 : 2015
|
ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061 |
|
MS14304 Revision B:2015
|
COUPLING, CAPS, PLUGS, & BUSHINGS, PIPE THREADED, PRESSURE CLASS 3000 & 6000 |
|
SAE J 403 : 2014
|
CHEMICAL COMPOSITIONS OF SAE CARBON STEELS |
|
SAE AMS WW T 700/6C : 2001(S2015)
|
TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 6061 |
|
ASTM B 221 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
|
MIL-DTL-32371-10 Base Document:2012
|
Fittings, Hydraulic Tube, Sleeve, Double Angle |
|
SAE AMS 5647 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
|
MIL-STD-889 Revision C:2016
|
DISSIMILAR METALS |
|
MIL-DTL-81706 Revision B:2004
|
Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
|
MIL-PRF-87257 Revision C:2017
|
HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
|
SAE AS 5206 : 2015
|
NUT, FLARED, LONG |
|
SAE AMS 2417 : 2013
|
PLATING, ZINC-NICKEL ALLOY |
|
SAE AMS C 81562 : 1998
|
COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
|
ASTM B 567 : 1998
|
Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
|
SAE AMS 4080 : 2016
|
ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
|
SAE AS 8879 : 2004
|
SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
|
SAE AS 5201 : 2013
|
FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
|
SAE AMS 2451/9 : 2012
|
PLATING, BRUSH, ZINC-NICKEL, LOW HYDROGEN EMBRITTLEMENT |
|
SAE J 514 : 2012
|
HYDRAULIC TUBE FITTINGS |
|
SAE AS 71051 : 2015
|
PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
SAE AMS 4117 : 2015
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
|
SAE AS 5310 : 2015
|
FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD |
|
SAE AMS 5050 : 2015
|
STEEL TUBING, SEAMLESS, 0.15 CARBON, MAXIMUM ANNEALED |
|
SAE AMS 4946 : 2016
|
TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED |
|
SAE AS 2078 : 2015
|
TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS |
|
MIL-PRF-83282 Revision D:1997
|
HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
SAE AMS 6370 : 2016
|
STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
|
SAE AMS 4082 : 2014
|
ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
MIL-C-15726 Revision F:1988
|
COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE |
|
SAE AS 5175 : 2017
|
NUT, COUPLING, FLARED |
|
SAE AMS 4124 : 2012
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
|
SAE AMS 4928 : 2016
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |