MIL-DTL-32480 Base Document:2014
NA
NA
Status of Standard is Unknown
Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
Available format(s)
PDF
Published date
29-08-2014
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies fittings, adapter, hydraulic, pneumatic, and conveyance, flareless tube fitting to O-ring face seal (ORFS) connectors, 1500 to 3000 psi, -65 degrees F to 250 degrees F temperature range, for use in hydraulic or pneumatic systems.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
This specification covers fittings, adapter, hydraulic, pneumatic, and conveyance, flareless tube fitting to O-ring face seal (ORFS) connectors, 1500 to 3000 psi, -65°F to +250°F temperature range, for use in hydraulic or pneumatic systems. The flareless connector ends are in accordance with SAE AS4375 connector ends, the ORFS end is in accordance with SAE J1453-3 connector ends.
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMSQQA225/9A | Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AMS6382P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed |
| SAE AMS5643U | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5743J | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| SAE J403_201406 | Chemical Compositions of SAE Carbon Steels |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| SAE AMS5647K | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AMS2417J | Plating, Zinc-Nickel Alloy |
| SAE J1453/3_201206 | Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends |
| SAE AMS C 81562 : 1998 | COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS2451/9B | Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| SAE J514_201201 | Hydraulic Tube Fittings |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AS4375C | FITTING END, FLARELESS, DESIGN STANDARD |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| MIL-C-15726 Revision F:1988 | COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE |
| SAE AMS4124E | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
| SAE AS4377C | FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.