MIL-DTL-85052 Revision B:2005
Current
The latest, up-to-date edition.
CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the design and test requirements for clamp, loop, cushion, primarily intended for general clamping of tubing for aircraft hydraulic systems.
Committee |
FSC 5340
|
DevelopmentNote |
Supersedes MIL C 85052 (A). (04/2005) B NOTICE 1 - Notice of Validation. (01/2010) B NOTICE 2 - Notice of Validation. (11/2014)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
UNI EN 6059-406 : 2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
MIL-DTL-85052-14 Base Document:2017 | Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced |
MIL-DTL-85052-9 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 550 DEGREES F, POLY-TETRAFLUOROETHYLENE (PTFE) |
MIL-DTL-85052-5 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, ETHYLENE PROPYLENE |
I.S. EN 6059-406:2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
MIL-DTL-85052-10 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 275 DEGREES F, NITRILE BUTADIENE RUBBER FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
MIL-DTL-85052-6 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 400 DEGREES F, FLUOROSILICONE |
BS EN 6059-406:2014 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Vibration |
MIL-DTL-85052-12 Base Document:2017 | Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone |
MIL-DTL-85052-11 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene |
MIL-DTL-85052-8 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 500 DEGREES F, SILICONE RUBBER, FABRIC REINFORCED |
MIL-DTL-85052-15 Base Document:2017 | Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE) |
EN 6059-406:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration |
MIL-DTL-85052-13 Base Document:2017 | Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene |
MIL-DTL-85052-16 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees Fahrenheit, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant |
MIL-DTL-85052-7 Revision A:2016 | CLAMP, LOOP, ALUMINUM 2024-T42, 212 DEGREES F, CHLOROPRENE |
PREN 6059-406 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
MIL-DTL-85052-3 Revision C:2005 | CLAMP, LOOP, TUBE-17-7 PH CRES, 500 DEGREES F |
MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
MIL-DTL-85052-2 Revision C:2005 | CLAMP, LOOP, TUBE - 17-7 PH CRES, 275 DEGREES F, PHOSPHATE ESTER FLUID RESISTANT |
ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
MIL-DTL-85052-4 Revision A:2005 | CLAMP SUPPORT - LOOP, CLAMP |
SAE AMSQQP35 | Passivation Treatments for Corrosion-Resistant Steel |
SAE ARP1527B | Color Coding - Elastomers for Tube Clamp Cushions |
ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
SAE AMS4946E | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved |
MIL-DTL-85052-1 Revision C:2005 | CLAMP, LOOP, TUBE 17-7 PH CRES, 275 DEGREES F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
SAE AMS5528H | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable |
SAE AMS5529J | Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 inch (0.038 to 2.54 mm) Nominal Thickness |
SAE AMS4944L | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.