• Shopping Cart
    There are no items in your cart

MIL-G-5514 Revision G:1993

Current

Current

The latest, up-to-date edition.

GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR

Available format(s)

PDF

Published date

01-11-1993

€17.95
Excluding VAT

Basic design criteria for gaskets, packing and gasket glands used in hydraulic equipment on systems designed to MIL-H-5440.

Committee
FSC 1650
DevelopmentNote
G NOTICE 1 - Notice of Inactivation for new design. (12/2002) G NOTICE 2 - Notice of Validation but remains Inactive for New Design. (01/2008)
DocumentType
Standard
Pages
25
ProductNote
NEW CHILD NOT 3 2019 IS NOW ADDED
PublisherName
US Military Specs/Standards/Handbooks
Status
Current

MIL-H-25475 Revision B:1971 HYDRAULIC SYSTEM, MISSILE, DESIGN, INSTALLATION TESTS AND DATE REQUIREMENTS, GENERAL REQUIREMENTS FOR
MIL-E-16400 Revision H:1987 ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
MIL-DTL-9395-31 Revision E:2006 SWITCHES, PRESSURE, (GAGE), TYPE 2, 5 AMPERES
SAE AS5782A Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, For Use in AS4716 Glands
MIL V 24630 : 0 VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
MIL-H-8775 Revision D:1976 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL-DTL-5523 Revision E:2011 VALVE; RELIEF, HYDRAULIC PRESSURE
MIL V 5523 : D VALVE, RELIEF, HYDRAULIC PRESSURE
SAE AMSP25732 Packaging, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275°F (135°C)
MIL-H-5440 Revision H:1993 HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL-P-8564 Revision D:1970 PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
SAE AS8791C Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AIR6082A Calculations to Determine Dimensions for Backup Rings to AS5781, AS5782, AS5860, AS5861
SAE AS28772B “D” RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL
MIL-T-9720 Revision F:1984 Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B
SAE AIR1186A Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks)
MIL-DTL-9395-40 Revision C:2006 SWITCHES, PRESSURE, (GAGE), TYPE 2, LOW LEVEL TO 5 AMPERE
MIL A 24533 : B ACTUATORS, ROTARY HYDRAULIC RACK AND PINION
MIL C 19836 : B COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD
MIL-P-87175 Base Document:1982 PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER
MIL-P-87210 Base Document:1984 PNEUMATIC POWER SYSTEMS, HIGH PRESSURE
MIL-DTL-9395-43 Revision C:2006 SWITCHES, PRESSURE, GAGE (TYPE 2), LOW LEVEL TO 1 AMPERE
SAE AS5781A Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS4716 Glands
MIL-DTL-9395-41 Revision D:2006 SWITCHES, PRESSURE, GAUGE (TYPE 2), LOW LEVEL TO 1 AMPERE
SAE AS 4052 : 2015 GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION
MIL-DTL-5516 Revision D:2008 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
SAE AS5798 Aerospace Size Standard for Oversize O-rings
MIL-DTL-5508 Revision C:2007 FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC
MIL-DTL-24630 Revision A:2014 Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
MIL A 5503 : E ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-P-83461 Revision B:1980 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
MIL F 81836 : A SUPP 1 FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE
MIL-DTL-5521 Revision C:2007 Washer, Aircraft Hydraulic Packing Back-Up
SAE ARP5555 Recommendations for Installation of Seals in Standard Glands
MIL-R-5049 Revision D:1989 RING, WIPER, PISTON ROD
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
SAE ARP 4943 : 2008 GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR
SAE AIR4543C Aerospace Hydraulics and Actuation Lessons Learned
SAE AS4716C Gland Design, O-ring and Other Seals
SAE ARP1802B Selection and Application of Polytetrafluoroethylene (PTFE and TFE) Backup Rings for Hydraulic and Pneumatic Fluid Power Applications

PPP-C-1752 Revision D:1989 CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM
MS28772 Revision B:1971 PACKING D, RING, SHOCK STRUT
MIL-P-87175-1 Base Document:1982 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER, GRADE 70 SIZES AND TOLERANCES
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
MIL P 5516 : C PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F
MIL-P-87175-2 Base Document:1982 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT PHOSPHONITRILIC FLUOROELASTOMER, GRADE 80, SIZES AND TOLERANCES
MIL-R-8791-1 Base Document:1989 RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN)
PPP-B-636 Revision J:1981 BOX, SHIPPING, FIBERBOARD
MIL-STD-2073-1 Revision E:2008 STANDARD PRACTICE FOR MILITARY PACKAGING
MIL-P-4861 Revision C:1991 PACKING, PREFORMED, RUBBER PACKAGING OF
MS27595 Revision E:2006 RETAINER, PACKING BACKUP, CONTINUOUS RING, POLYTETRAFLUOROETHYLENE
MIL-P-87175 Base Document:1982 PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER
MS33515 Revision J:1973 FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
MS28774 Revision M:2009 RETAINER, PACKING BACKUP, SINGLE TURN, POLYTETRAFLUOROETHYLENE
MS28778 Revision C:1984 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS
MS28775 Revision E:1984 PACKING, PREFORMED, HYDRAULIC, PLUS 275 DEG. F. (O RING)
MS33656 Revision J:1987 FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL
MS33566 Revision B:1975 FITTING, INSTALLATION OF FLARELESS TUBE, STRAIGHT THREADED CONNECTOR
MS28782 Revision E:2006 RETAINER, PACKING, BACK-UP, TEFLON
PPP-C-795 Revision D:1994 Cushioning Material, Closed Cell Flexible, Plastic Film
MS28773 Revision A:2005 RETAINER, PACKING, BACK-UP, TETRAFLUOROETHYLENE, STRAIGHT THREAD TUBE FITTING BOSS
MIL-R-8791 Revision D:1982 RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN
MIL B 131 : H BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE
MS28783 Revision F:2006 RING, GASKET, BACK-UP, PTFE
DOD-D-1000 Revision B:1977 DRAWINGS, ENGINEERING AND ASSOCIATED LISTS
FED-STD-101 Revision C:1980 TEST PROCEDURES FOR PACKAGING MATERIALS
MIL-P-116 Revision J:1988 PRESERVATION, METHODS OF
MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
MIL-P-83461 Revision B:1980 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MS33514 Revision G:1990 FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL (ASG)
MS21344 Revision A:2016 FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR
PPP-B-640 Revision D:1966 BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL
MIL-P-83461-1 Revision B:1989 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE OF 275 DEG. F (135 DEG. C) SIZES AND TOLERANCES

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.