MIL-HDBK-1277 Base Document:1998
Current
The latest, up-to-date edition.
Splices, Chips, Terminals, Terminal Boards, Binding Posts, Electrical
20-02-1998
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
1.1 Scope
1.2 Application
2. REFERENCED DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
4.1 Choice of types of splices, terminals, terminal
boards, binding posts, and terminal junction
systems, and wire caps
5. DETAILED REQUIREMENTS
6. SUPPLEMENTAL REQUIREMENTS
6.1 Drawing notes
Describes a list for the selection of splices, terminals, terminal boards, binding posts, terminal junction systems, and wire caps designated as preferred for use in new design of military equipment.
| DevelopmentNote |
Supersedes MIL STD 1277 (B). (08/2004). NOTICE 1 - Notice of Validation. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
245
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This standard establishes a list for the selection of splices, terminals, terminal boards, binding posts, terminal junction systems, and wire caps designated as preferred for use in new design of military equipment. Complete detail requirements for splices, terminals, terminal boards, binding posts, terminal junction systems and wire caps listed in this standard are covered in the applicable military document listed herein.
| SAE AS81714B | Terminal Junction System (TJS), Environment Resistant General Specification For |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| SAE AIR38B | Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations |
| MS77069 Base Document:1965 | TERMINALS LUG SOLDER TYPE PHOSPHOR BRONZE STAMPING LOCKING TYPE 30 DEG. ONE HOLE |
| MS35438 Revision B:1989 | TERMINAL, LUG, SOLDER TYPE, COPPER STAMPING, INSULATION GRIP, ONE HOLE, FLAG |
| MS35449 Revision B:1961 | TERMINAL, LUG, SOLDER TYPE, COPPER TUBING, TWO HOLE |
| MS77067 Revision A:1989 | TERMINAL LUG SOLDER TYPE PHOSPHER BRONZE STAMPING LOCKING TYPE FLAT TWO HOLE |
| MS27212 Revision P:1994 | TERMINAL BOARD, ASSEMBLY, MOLDED IN STUD, ELECTRIC |
| MS21011 Revision C:1981 | TERMINAL LUG UNINSULATED RECTANGULAR CRIMP STYLE COPPER TYPE 1 CLASS 1 (SPECIAL APPLICATION) FOR 175 DEG C TOTAL CONDUCTOR TEMPERATURE |
| MS21010 Revision B:1981 | TERMINAL LUG UNINSULATED RECTANGULAR TONGUE LIPPED END CRIMP STYLE TYPE 1 CLASS 1 FOR 175 DEG C TOTAL CONDUCTOR TEMPERATURE |
| MS35430 Revision C:2003 | Terminal, Lug, Solder Type, Copper Stamping, One Hole |
| MS35434 Revision A:1956 | TERMINAL, LUG, SOLDER TYPE, COPPER STAMPING, ONE HOLE, FLAG |
| MS77072 Base Document:1965 | TERMINAL LUG SOLDER TYPE PHOSPHOR BRONZE STAMPING LOCKING TYPE FLAT ONE HOLE |
| MS21006 Revision A:1973 | TERMINAL LUG UNINSULATED FLAG TONGUE CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS35448 Revision B:1961 | TERMINAL, LUG, SOLDER TYPE, COPPER TUBING, ONE HOLE, 90 DEG. |
| MS77068 Revision B:2003 | Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, 45 Degrees, Two Hole |
| MS25439 Revision A:1964 | SPLICE PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE CLASS 1, |
| MS75004 Revision G:1987 | ADAPTER BATTERY TERMINAL (STORAGE BATTERY) |
| MS21005 Revision A:1973 | TERMINAL LUG UNINSULATED RECTANGULAR TONGUE TWO STUD CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS25436 Revision A:1964 | TERMINAL, LUG, CRIMP STYLE 90 DEGREES UPRIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1 |
| MIL-T-7099 Revision E:1979 | TERMINAL, LUG AND SPLICE, CRIMP STYLE ALUMINUM FOR ALUMINUM AIRCRAFT WIRE |
| MS21004 Revision D:1981 | TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE 1, CLASS 1, FOR 175 DEGREE C TOTAL CONDUCTOR TEMPERATURE |
| MIL-T-81714 Revision E:1988 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
| MS25036 Revision P:1986 | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL MOUTHED, TYPE 2, CLASS 1 (FOR 105 DEGREE C TOTAL CONDUCTOR TEMPERATURE) |
| MS77066 Base Document:1965 | Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type 30 Degrees One Hole |
| MIL-T-55164 Revision C:1987 | TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR |
| MS77074 Revision B:2003 | Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Insulation Grip. Locking Type |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MS21003 Revision B:1981 | TERMINAL LUG, INSULATED,RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS I FOR 175 DEG C TOTAL CONDUCTOR TEMPERATURE |
| MS21014 Revision A:1973 | TERMINAL LUG UNINSULATED RECTANGULAR TONGUE TWO BARREL CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS21008 Revision A:1973 | TERMINAL LUG UNINSULATED OFFSET RECTANGULAR TONGUE CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS21007 Revision B:1981 | TERMINAL LUG UNINSULATED RECTANGULAR (BENT 90 DEG) CRIMP STYLE COPPER TYPE 1 CLASS 1 (SPECIAL APPLICATION FOR 175 DEG.C. CONDUCTOR TEMPERATURE) |
| MS21012 Revision A:1973 | TERMINAL LUG UNINSULATED RECTANGULAR TONGUE LIPPED END CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS35440 Revision B:2003 | Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, Slotted |
| MS17143 Revision F:1981 | TERMINAL LUG, CRIMP STYLE, COPPER INSULATED, RECTANGULAR TONGUE TYPE II CLASS 1 FOR 105 DEG.C. TOTAL CONDUCTOR TEMPERATURE |
| MS35447 Revision B:1961 | TERMINAL, LUG, SOLDER TYPE, COPPER TUBING, ONE HOLE 45 DEG. |
| MS25438 Revision A:1964 | TERMINAL, LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1 |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| MS21009 Revision A:1973 | TERMINAL LUG, UNINSULATED RECTANGULAR TONGUE LIPPED SIDE CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS35436 Revision C:2003 | Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, One Hole |
| MS21013 Revision A:1973 | TERMINAL LUG UNINSULATED RECTANGULAR TONGUE OFF CENTER HOLE LIPPED END CRIMP STYLE COPPER TYPE 1 CLASS 1 |
| MS35431 Revision H:2003 | Terminal, Lug, Solder Type, Copper Stamping, One Hole, Flat |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| MS35446 Revision C:1989 | TERMINAL, LUG, SOLDER TYPE, COPPER TUBING, ONE HOLE |
| MS17182 Revision E:1981 | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED (SERVO COMPONENTS) TYPE 2, CLASS 1, FOR 125 DEG. C TOTAL CONDUCTOR TEMPERATURE |
| MS25189 Revision C:1968 | TERMINAL, LUG, FLAG TYPE, CRIMP STYLE, COPPER, CLASS 1 |
| MS25435 Revision A:1964 | TERMINAL, LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE CLASS 1 |
| MS35444 Revision A:1956 | TERMINAL, LUG, SOLDER TYPE, COPPER STAMPING, TWO HOLE |
| MS77070 Base Document:1965 | TERMINAL LUG SOLDER TYPE PHOSPHER BRONZE STAMPING LOCKING TYPE FLAT ON HOLE |
| MS21015 Revision A:1973 | TERMINAL LUG UNINSULATED SQUARE TONGUE LIPPED END RECTANGULAR STUD HOLE CRIMP STYLE COPPER TYPE 1 CLASS 1 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.