Skip to content
Please enter a keyword to search

  • MIL-HDBK-692 Revision B:1983

    Current The latest, up-to-date edition.

    A Guide to the Selection of Rubber O-Rings

    Available format(s):  PDF

    Language(s): 

    Published date:  14-10-1983

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Composite list of O-rings available for which military or nationally recognized technical society specifications exist.

    Scope - (Show below) - (Hide below)

    This handbook lists the currently available types of O-rings for which military or nationally recognized technical society specifications exist, and indicates the environments to which each type of O-ring is resistant. Plastic or metal O-rings fabricated from rubber in combination with other materials, and ring shaped packings and gaskets with other than round cross sections are not included. Information relative to the effect of a particular fluid on various elastomers is not included in this handbook (see 3).

    General Product Information - (Show below) - (Hide below)

    Development Note B NOTICE 1 - Notice of Inactivation for New Design. (04/2013) New child NOT 2 2023 is now added.
    Document Type Standard
    Product Note New child NOT 2 2023 is now added.
    Publisher US Military Specs/Standards/Handbooks
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    DOD-STD-35-36 Revision B:1979 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING

    Standards Referencing This Book - (Show below) - (Hide below)

    MIL-R-83248 Revision C:1994 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
    MS3393 Base Document:1969 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC, 65 DEG. F. TO PLUG 275 DEG. F.
    MIL-P-87175-1 Base Document:1982 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER, GRADE 70 SIZES AND TOLERANCES
    MS9966 Base Document:1971 PACKING, PREFORMED AMS 7273 SEAL
    MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
    MIL-P-5315 Revision B:1964 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT
    MS9385 Revision A:1975 PACKING, PREFORMED, AMS 7267, O-RING
    MIL P 5516 : C PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F
    MIL-P-87175-2 Base Document:1982 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT PHOSPHONITRILIC FLUOROELASTOMER, GRADE 80, SIZES AND TOLERANCES
    MIL-E-9500 Revision B:1983 ETHYLENE GLYCOL, TECHNICAL
    MS9021 Revision D:1986 PACKING, PREFORMED - RUBBER, "O" RING
    MIL-R-83485 Base Document:1976 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES
    MIL-P-4861 Revision C:1991 PACKING, PREFORMED, RUBBER PACKAGING OF
    MIL-M-23573 Revision B:1986 MONOETHANOLAMINE CHELATING AGENT SOLUTION
    MIL R 25897 : LATEST
    MIL R 6855 : E RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
    MS9386 Revision B:1975 PACKING, PREFORMED, AMS 7267, (O)-RING
    MIL T 5624 : R TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5
    MIL-P-87175 Base Document:1982 PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER
    MIL-P-17553 Revision A:1976 PACKING, PREFORMED, O RING, SYNTHETIC RUBBER
    MIL R 900 : F RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
    MS9241 Revision D:1986 PACKING, PREFORMED RUBBER, O RING
    MS29513 Revision C:1966 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, O RING
    MIL-G-21610 Revision C:1989 GASKETS, HEAT EXCHANGER, VARIOUS CROSS SECTION RINGS, SYNTHETIC RUBBER
    MIL-STD-417 Revision A:1976 CLASSIFICATION SYSTEM AND TESTS FOR SOLID ELASTOMERIC MATERIALS
    MS28778 Revision C:1984 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS
    MIL P 26536 : D PROPELLANT, HYDRAZINE
    MS28775 Revision E:1984 PACKING, PREFORMED, HYDRAULIC, PLUS 275 DEG. F. (O RING)
    MS29512 Revision C:1965 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT TUBE FITTING 0 RING
    MIL-R-83485-1 Base Document:1976 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES
    MS9068 Base Document:1960 PACKING, PREFORMED - AMS 3304, "0" RING
    MS90064 Revision F:1990 PACKING, PREFORMED, ROUND (FOR USE WITH WAVEGUIDE FLANGES AND DUMMY LOADS)
    MS9967 Base Document:1971 PACKING, PREFORMED AMS 7273 "O" RING
    MS9970 Base Document:1972 PACKING PREFORMED AMS 7279 O RING
    TT-S-735 Revision A:1988 STANDARD TEST FLUIDS, HYDROCARBON
    MIL R 3533 : B RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED
    MIL-G-5572 Revision F:1969 GASOLINE, AVIATION, GRADES 80/87, 100/130, 115/145
    MIL H 83282 : C HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537
    MIL R 25988 : B RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
    MIL R 2765 : D RUBBER SHEET, STRIP, EXTRUDED AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
    MIL-STD-1523 Revision A:1984 AGE CONTROLS OF AGE-SENSITIVE ELASTOMERIC MATERIAL
    MS 24690 : E PACKING, PREFORMED & HIGH PRESSURE AIR VALVE
    MIL-R-3065 Revision E:1984 RUBBER, FABRICATED PRODUCT
    MIL-P-116 Revision J:1988 PRESERVATION, METHODS OF
    MS9355 Revision A:1986 PACKING, PREFORMED O RING
    MS29561 Revision A:1966 PACKING, PREFORMED, O RING, SYNTHETIC LUBRICANT RESISTANT
    MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
    MS33666 Revision C:1975 PACKING, PREFORMED AERONAUTICAL, ELASTOMERIC, RANGE OF SIZES (ASG)
    MIL-P-83461 Revision B:1980 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
    MIL G 22050 : D GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES
    ZZ-R-765 Revision E:1991 RUBBER, SILICONE; RUBBER SHEET SOLID
    MS28900 Revision A:1986 PACKING, PREFORMED, O-RING, FOR ELECTRICAL USE
    MS9387 Revision A:1975 PACKING, PREFORMED AMS 7278 SEAL
    MIL-G-21569 Revision B:1965 GASKET, CYLINDER LINER SEAL, SYNTHETIC RUBBER
    ZZ R 710 : A RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS
    AN6230 Revision 9:1982 GASKET "O"-RING HYDRAULIC
    MIL P 5425 : D PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
    MIL-H-19457 Revision D:1989 HYDRAULIC FLUID, FIRE RESISTANT, NON NEUROTOXIC
    MIL-P-83461-1 Revision B:1989 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE OF 275 DEG. F (135 DEG. C) SIZES AND TOLERANCES
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective