MIL-P-83126 Revision A:1980
Current
Current
The latest, up-to-date edition.
PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR
Available format(s)
PDF
Language(s)
English
Published date
08-02-1980
Publisher
€16.67
Excluding VAT
Covers design requirements for aircrew escape propulsion systems and tests of units for aircrew escape systems.
| DevelopmentNote |
Supersedes MIL A 85041. (06/2004)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This specification establishes the minimum requirements for the design, development/adaptation, design verification, and service release criteria for Aircrew Escape Propulsion Systems (AEPS) and testing of units manufactured for Aircrew Escape Systems (AES) system and subsystem tests.
| MIL DTL 0085097/13 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS) ROCKET MOTOR, CANOPY JETTISON, MARK 109 MOD 0 (LOADED ASSEMBLY) |
| MIL-HDBK-516 Revision C:2014 | Airworthiness Certification Criteria |
| MIL STD 1550 : 0 | QUALITY ASSURANCE TESTING AND INSPECTION OF AIRCRAFT CREW EMERGENCY ESCAPE PROPELLANT EQUIPMENT |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-DTL-85097-13 Revision C:2000 | Aircrew Escape Propulsion Systems (AEPS) Rocket Motor, Canopy Jettison, Mark 109 Mods 0 and 1 (Loaded Assemblies) |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL HDBK 5 : G_VOL2 | METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES |
| MIL-E-9426 Revision F:1978 | Escape System, Requirements Conformance Demonstrations and Performance Tests for, General Specification for (No S/S Document) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-C-83124 Base Document:1969 | Cartridge Actuated Devices/Propellant Actuated Devices General Design Specification for |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-HDBK-694 Revision A:1966 | Aluminum and Aluminum Alloys (No S/S Document) |
| MIL F 18240 : E | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEG F MAXIMUM |
| MIL-P-85089 Revision A:1990 | PAINTING OF AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS) |
| MIL-STD-1168 Revision C:2014 | Ammunition Lot Numbering and Ammunition Data Card |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-2067 Base Document:1978 | AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR (S/S BY MIL-HDBK-2067) |
| MIL-H-6875 Revision H:1989 | Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875) |
| MIL I 6866 : B | INSPECTION, PENETRANT METHOD OF |
| MIL S 9479 : C | |
| DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL-R-81128 Base Document:1964 | Rocket Motors, Identification of Parts and Assemblies, Requirements for |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-STD-2100 Base Document:1979 | Propellant, Solid, Characterization Of (Except Gun Propellant) |
| MIL-D-23615 Revision C:1993 | Design and Evaluation of Cartridge Actuated Devices |
| MIL-S-83490 Base Document:1968 | SPECIFICATION, TYPES AND FORMS (S/S BY MIL-STD-961) |
| MIL-STD-1252 Base Document:1975 | Inertia Friction Welding Process, Procedure and Performance Qualification |
| MIL I 23659 : C | INITIATOR, ELECTRIC, GENERAL DESIGN SPECIFICATION |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-D-21625 Revision G:1993 | Design and Evaluation of Cartridge Actuated Devices |
| MIL-STD-414 Base Document:1957 | SAMPLING PROCEDURE AND TABLE FOR INSPECTION BY VARIABLES FOR PERCENT DEFECTIVE (S/S BY ASQC-Z1.9) |
| MIL-STD-1512 Base Document:1972 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS (S/S BY MIL-HDBK-1512) |
| MIL-A-23121 Revision C:1970 | Aircrew Environmental, Escape and Survival Cockpit Capsule System General Specification for (No S/S Document) |
| MIL-STD-453 Revision C:1984 | Inspection, Radiographic (S/S By ASTM-E1742) |
| MIL-F-7190 Revision B:1985 | Forging, Steel, for Aircraft/Aerospace Equipment and Special Ordinance Applications (S/S by SAE-AMS-F-7190) |
| MIL-STD-838 Revision C:1983 | LUBRICATION OF MILITARY EQUIPMENT |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-STD-143 Revision B:1969 | STANDARDS & SPECIFICATIONS, ORDER OF PRECEDENCE FOR THE SELECTION OF (S/S BY MIL-STD-970) |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (S/S BY NASM23460) |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL-I-6868 Revision E:1976 | Inspection Process, Magnetic Particle (S/S by MIL-STD-1949) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-A-21180 Revision D:1984 | Aluminum-Alloy Castings, High Strength (S/S by SAE-AMS-A-21180) |
| MIL-W-8611 Revision A:1957 | WELDING, METAL ARC AND GAS, STEELS, AND CORROSION AND HEAT RESISTANT ALLOYS; PROCESS FOR (S/S BY MIL-STD-2219) |
| DOD-D-1000 Revision B:1977 | Drawings, Engineering and Associated Lists (S/S by MIL-DTL-31000) |
| MIL C 45662 : 0 | CALIBRATION SYSTEM REQUIREMENTS |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF (S/S BY MIL-STD-2073-1) |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| MIL-STD-490 Revision A:1985 | SpecificationPractices (S/S by MIL-STD-961) |
| MIL-H-6088 Revision G:1991 | Heat Treatment of Aluminum Alloys (S/S by SAE-AMS-H-6088) |
| PPP-T-66 Revision E:1976 | TAPE, PACKAGING, VINYL PLASTIC FILM (S/S BY A-A-1689) |
| MIL-C-5501 Revision G:1989 | Caps and Plugs, Protective, Dust and Moisture Seal, General Specification for (S/S by NAS847) |
| MIL-HDBK-691 Revision B:1987 | Adhesive Bonding |
| PPP-B-621 Revision D:1981 | Boxes, Wood, Nailed and Lock-Corner (S/S by ASTM-D6880) |
| MIL-STD-1167 Revision C:1985 | Ammunition Data Card (S/S by MIL-STD-1168) |
| MIL-HDBK-132 Revision A:1984 | Protective Finishes for Metal and Wood Surfaces (No S/S Document) |
| MIL C 6021 : H NOTICE 1 | CASTINGS, CLASSIFICATION AND INSPECTION OF |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| DOD STD 480 : A | CONFIGURATION CONTROL - ENGINEERING CHANGES, DEVIATIONS AND WAIVERS |
| MIL-STD-785 Revision B:1980 | RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
| MIL-HDBK-695 Revision F:2017 | Rubber Products: Recommended Shelf Life |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.