MIL-PRF-29504-21 Base Document:2014
NA
Status of Standard is Unknown
Test Terminus, Fiber Optic, Keyed, Removable, use in Optical Loss and Optical Continuity Testing, Rear Insert/Rear Release Through a Test Terminus Adapter, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors)
English
03-02-2014
DocumentType |
Standard
|
Pages |
13
|
ProductNote |
NEW CHILD NOT 1 2018 IS NOW ADDED
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
NA
|
The Measurement Quality Jumper (MQJ) is a fiber optic test jumper or cable that conforms to the low loss optical requirements. The MQJ is used with test equipment including the performance of optical loss measurements using an optical source and power meter and including Optical Time Domain Reflectometer (OTDR) measurements. The MQJ consists of a single fiber cable with a connector at one end which mates to the test equipment (such as an optical source and power meter) and a connector (test terminus) at the other end which mates to the link/segment under test. For mating to a link/segment with a MIL-PRF-64266 multiple termini connector, a test terminus adapter is used to interface with the multiple termini connector plug or the connector receptacle under test. The test terminus adapter contains the insert cavity configuration to mate with and lock a test terminus in place. This specification sheet specifies the test terminus. The test terminus adapter is specified under MIL-PRF-64266/32 and MIL-PRF-64266/33.
MIL-PRF-64266-32 Base Document:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, PLUG STYLE, FOR USE WITH A CONNECTOR RECEPTACLE |
MIL-STD-1678-6 Revision A:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS) |
MIL-PRF-64266-33 Base Document:2014 | Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable Genderless Termini, Screw Threads, Test Terminus Adapter, Receptacle Style, for Use with a Connector Plug |
TIA/EIA 455-16 : A1991(R2014) | SALT SPRAY (CORROSION) TEST FOR FIBER OPTIC COMPONENTS - FOTP-16 |
MIL-PRF-64266-33 Base Document:2014 | Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable Genderless Termini, Screw Threads, Test Terminus Adapter, Receptacle Style, for Use with a Connector Plug |
MIL-PRF-29504-18 Base Document:2008 | Termini, Fiber Optic, Non-Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
MIL-PRF-64266-32 Base Document:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, PLUG STYLE, FOR USE WITH A CONNECTOR RECEPTACLE |
MIL-PRF-29504 Revision B:2002 | TERMINI, FIBER OPTIC CONNECTOR, REMOVABLE, GENERAL SPECIFICATION FOR |
MIL-STD-2042-6 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS) |
MIL-PRF-29504-20 Base Document:2008 | Termini, Fiber Optic, Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
SAE AIR 1351 : 2014 | MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES |
MIL-PRF-24792 Revision A:1999 | ADHESIVE, EPOXY, TWO PART, FIBER OPTICS |
MIL-PRF-64266-9 Revision A:2014 | Connectors, Fiber Optic, Circular, Alignment Sleeve Retainer (ASR), Multiple Removable Genderless Termini, Screw Threads, Environment Resisting |
MIL-STD-1678-4 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS (PART 4 OF 6 PARTS) |
MIL-PRF-64266-20 Base Document:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, SCREW THREADS, BACKSHELL, SPLIT, SINGLE FIBER CABLES, BANDING ADAPTER/CABLE STRAIN RELIEF INTERFACE, ENVIRONMENT RESISTING |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
MIL-PRF-64266-18 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SPLIT, MULTIPLE FIBER CABLES, STRENGTH MEMBER CAPTURE AND BEND LIMITING INTERFACE, ENVIRONMENT RESISTING |
MIL-PRF-64266 Revision B:2016 | CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR |
MIL-STD-1678-2 Revision A:2013 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS) |
MIL-PRF-85045-16 Revision C:2014 | CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER, CABLE CLASS SM AND MM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.