MIL-PRF-32470 Base Document:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN
30-04-2021
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes a 10,000 pound rated variable reach, rough terrain forklift truck, henceforth referred to as a 10K Telehandler.
| Committee |
FSC 3930
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| A-A-52624 Revision A:2001 | ANTIFREEZE, MULTI-ENGINE TYPE |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| MIL-DTL-6458 Revision H:2014 | CHAIN ASSEMBLIES, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| AWS D1.3/D1.3M : 2008 | STRUCTURAL WELDING CODE-SHEET STEEL |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| AWS D1.2/D1.2M : 2014 | STRUCTURAL WELDING CODE - ALUMINUM |
| MIL-PRF-26915 Revision D:1997 | PRIMER COATING, FOR STEEL SURFACES |
| GOST 10227 : 1986 AMD 6 2012 | |
| MIL-STD-1791 Revision C:2017 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| MIL-DTL-25959 Revision H:2012 | TIE DOWN, TENSIONERS, CARGO, AIRCRAFT |
| SAE J185_201608 | Access Systems for Off-Road Machines |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| ISO 5010:2007 | Earth-moving machinery Rubber-tyred machines Steering requirements |
| SAE J695_201106 | Turning Ability and Off Tracking - Motor Vehicles |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-PRF-2104 Revision K:2016 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| A-A-59295 Base Document:1998 | CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELDED MOTOR VEHICLES AND TRAILERS) |
| SAE J534_201508 | Lubrication Fittings |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| AWS D1.6/D1.6M : 2007 | STRUCTURAL WELDING CODE - STAINLESS STEEL |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| MIL-PRF-46167 Revision D:2005 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| SAE ARP1247D | Aircraft Ground Support Equipment — General Requirements |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MIL-STD-1366 Revision E:2006 | INTERFACE STANDARD FOR TRANSPORTABILITY CRITERIA |
| SAE J386_201208 | Operator Restraint System for Off-Road Work Machines |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| MIL-B-18013-1 Base Document:1994 | BATTERY, STORAGE, SUPPORT EQUIPMENT |
| A-A-52557 Revision A:2001 | FUEL, OIL, DIESEL; FOR POSTS, CAMPS AND STATIONS |
| SAE J994_201409 | Alarm—Backup—Electric Laboratory Performance Testing |
| MIL-STD-209 Revision K:2005 | LIFTING AND TIEDOWN PROVISIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.