MIL-PRF-39018 Revision G:2009
Current
The latest, up-to-date edition.
Capacitor, Fixed, Electrolytic (Aluminum Oxide), Established Reliability, and Non-Established Reliability, General Specification for
20-02-2009
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Describes the general requirements for established reliability (ER) and non-ER, aluminum oxide, electrolytic, fixed capacitors.
| DevelopmentNote |
Supersedes MIL C 39018 (B) (09/2004) New child NOT 1 2022 is added.
|
| DocumentType |
Standard
|
| Pages |
72
|
| ProductNote |
New child NOT 1 2022 is added.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for established reliability (ER) and non-ER, aluminum oxide, electrolytic, fixed capacitors (see 6.1). Capacitors meeting the ER requirements of this specification have reliability established on the basis of life tests performed at rated voltage at +85°C for failure rate (FR) levels ranging from 1.0 percent to 0.001 percent per 1,000 hours in accordance with MIL-STD-690. These FR levels are established at a 60-percent confidence level and are maintained at a 10 percent producer\'s risk. The level of reliability is identified by the following FR level symbols:
| MIL-PRF-39018-3 Revision G:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Polarized), Non-Established Reliability and Established Reliability, Styles CU16 (Uninsulated), CU17 (Insulated), and CUR17 (Insulated) |
| DSCC 89085 : E#CAN | CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINIUM OXIDE, SNAP MOUNT, LOW PROFILE |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-PRF-39018-4 Revision E:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Polarized), Non-Established Reliability and Established Reliability, Styles CU71 (Insulated) and CUR71 (Insulated) |
| MIL HDBK 1131 : C | STORAGE SHELF LIFE AND REFORMING PROCEDURES FOR ALUMINUM ELECTROLYTIC FIXED CAPACITORS |
| DSCC 05018 : F | CAPACITOR, ULTRA LONG LIFE, ALUMINUM CASE FLAT PACK, +85 DEGREES C |
| DSCC 89021 : E | CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINIUM OXIDE, ULTRA-LOW ESR |
| MIL-PRF-39018-1 Revision H:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Polarized), Non-Established Reliability and Established Reliability, Styles CU12 (Uninsulated), CU13 (Insulated), and CUR13 (Insulated) |
| DSCC 01001 : A | CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINUM OXIDE |
| MIL-PRF-39018-2 Revision F:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Nonpolarized), Styles CU14 (Uninsulated) and CU15 (Insulated) |
| DSCC 05019 : G | CAPACITOR, ULTRA LONG LIFE, STAINLESS-STEEL CASE FLAT PACK, +125 DEGREES C |
| MIL C 39018/10 : B | CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(POLARIZED), ESTABLISHED RELIABILITY, STYLE CUR92 (INSULATED) |
| MIL-PRF-39018-7 Revision C:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Polarized), (Four-Terminal), Established Reliability, Style CUR19 (Insulated) |
| DSCC 88022 : F | CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINIUM OXIDE, SINGLE END MOUNTING |
| MIL-HDBK-198 Revision B:2012 | Capacitors, Selection and Use of |
| DSCC 89012 : C | CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINIUM OXIDE, LOW SCREW-INSERT |
| MIL-PRF-39018-6 Revision D:2009 | Capacitor, Fixed, Electrolytic (Aluminum Oxide) (Polarized), Established Reliability, Style CUR91 (Insulated) |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-305 Base Document:2015 | Method 305, Capacitance |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-202-107 Base Document : 2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-STD-202-104 Base Document:2015 | Method 104, Immersion |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-201 Base Document:2015 | Method 201, Vibration |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.