MIL-PRF-49291 Revision D:2013
Current
Current
The latest, up-to-date edition.
Fiber, Optical, (Metric) General Specification for
Available format(s)
PDF
Published date
20-06-2013
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - CHROMATIC DISPERSION
Specifies the general requirements and characteristics of optical fibers for signal transmission.
| DevelopmentNote |
Supersedes MIL F 49291. (03/2003)
|
| DocumentType |
Standard
|
| Pages |
47
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements and characteristics of optical fibers for signal transmission. The fiber is defined as the core, cladding, and protective coatings applied during the fiber drawing process.
| MIL-PRF-49291-1 Revision B:2002 | Fiber, Optical, Type I, Class I, Composition A, Size III, Wavelength B, Radiation Resistant (METRIC) |
| MIL-PRF-85045 Revision G:2014 | Cables, Fiber Optic, General Specification for |
| MIL-C-83522-1 Revision F:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STEP-DOWN NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| MIL-DTL-83526-21 Revision C:2014 | Connector, Fiber Optic, Circular Hermaphroditic, Bulkhead, Low Profile without Strain Relief, Jam-Nut Mount, 2 and 4 Positions, Expanded Beam |
| MIL-DTL-83526 Revision D:2014 | Connectors, Fiber Optic, Circular, Environmental Resistant, Hermaphroditic, General Specification for |
| SAE AS6021 | AS6021 Aerospace Fiber Optic Cable Assembly Drawing Specification |
| MIL-STD-1678-4 Revision C:2016 | Fiber Optic Cabling Systems Requirements and Measurements (Part 4: Test Sample Configuration and Fabrication Requirements) (Part 4 of 6 Parts) |
| MIL-PRF-49291-11 Revision B:2013 | Fiber, Optical, Type II, Class 5, Size II, Composition A, Wavelength D, Radiation Resistant, Enhanced Performance Characteristics (Metric) |
| MIL-STD-1678-2 Revision A:2013 | Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements) (Part 2 of 6 Parts) |
| MIL-PRF-64266 Revision B:2016 | Connectors, Fiber Optic Circular and Rectangular, Plug and Receptacle Style, Multiple Removable Genderless Termini, Environment Resisting General Specification for |
| MIL-PRF-49291-12 Revision B:2013 | Fiber, Optical, Type I, Class I, Size III, Composition A, Wavelength B, Radiation Resistant, Enhanced Performance Characteristics/Aircraft Applications |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| DSCC 10024 : 0 | CONNECTOR RECEPTACLE, EXPANDED BEAM, MIXED MODE (2 SINGLE MODE & 2 MULTIMODE CHANNELS) |
| MIL-PRF-49291-10 Revision B:2013 | Fiber, Optical, Type I, Class I, Size IV, Composition A, Wavelength B, Radiation Resistant, Enhanced Performance Characteristics (Metric) |
| MIL-STD-2042-1 Revision C:2016 | Fiber Optic Cable Topology Installation Standard Methodsfor SurfaceShips and Submarines(Cables) (Part 1of 7 Parts) |
| SAE AIR6162 | Fusion Splicing for Optical Fibers |
| SAE AIR6282 | Fiber Optic Harsh Environment Test Methods Cross Reference Document |
| SAE AS5590A | Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For |
| MIL-C-83522-2 Revision G:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STRAIGHT NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| DSCC 09001 : B | CABLE, FIBER OPTIC, MIXED FIBER (MULTIMODE AND SINGLE MODE FIBERS) |
| SAE AS6506A | Fusion Splice for Aerospace Fiber Optic Cables |
| TIA/EIA 455-71 : A1999(R2014) | PROCEDURE TO MEASURE TEMPERATURE-SHOCK EFFECTS ON FIBER OPTIC COMPONENTS |
| TIA 455-28 : C1995(R2005) | FOTP-28 - METHOD FOR MEASURING DYNAMIC TENSILE STRENGTH AND FATIGUE PARAMETERS OF OPTICAL FIBERS BY TENSION |
| TIA 455-62 : B2003 | FOTP-62 IEC-60793-1-47 - OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| TIA 455-178 : B2003 | OPTICAL FIBRES - PART 1-32: MEASUREMENT METHODS AND TEST PROCEDURES - COATING STRIPABILITY |
| TIA/EIA 455-204 : A2013 | MEASUREMENT OF BANDWIDTH ON MULTIMODE FIBER |
| TIA 455-80 : C2003 | FOTP-80 - IEC 60793-1-44 OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| TIA 455-176 : A2003 | OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY |
| TIA 455-167 : A1992 | MODE FIELD DIAMETER MEASUREMENT, VARIABLE APERTURE METHOD IN THE FAR-FIELD |
| TIA 455-195 : A2003(R2013) | OPTICAL FIBRES - PART 1-21: MEASUREMENT METHODS AND TEST PROCEDURES - COATING GEOMETRY |
| TIA 455-13 : A1996(R2012) | VISUAL AND MECHANICAL INSPECTION OF FIBER OPTIC COMPONENTS, DEVICES, AND ASSEMBLIES |
| TIA 455-175 : B2003 | OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES CHROMATIC DEPRESSION |
| TIA/EIA 455 : C2014 | General Requirements for Standard Test Procedures for Optical Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and other Fiber Optic Components |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| TIA 455-133 : A2003(R2013) | OPTICAL FIBRES - PART 1-22: MEASUREMENT METHODS AND TEST PROCEDURES - LENGTH MEASUREMENT |
| TIA 455-64 : 1998(R2002) | PROCEDURE FOR MEASURING RADIATION-INDUCED ATTENUATION IN OPTICAL FIBERS AND OPTICAL CABLES |
| TIA 455-20 : B2004(R2013) | OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| TIA 455-74 : A2003(R2013) | OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION |
| TIA 455-220 : A2003 | DIFFERENTIAL MODE DELAY MEASUREMENT OF MULTIMODE FIBER IN THE TIME DOMAIN |
| MIL-STD-1678-2 Revision A:2013 | Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements) (Part 2 of 6 Parts) |
| TIA 455-177 : B2003 | FOTP177 - IEC 60793-1-43 - OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE |
| TIA 455-78 : B2002 | FOTP-78 - IEC 60793-1-40 - OPTICAL FIBRES - PART 1-40: MEASUREMENT METHODS AND TEXT PROCEDURES - ATTENUATION |
| MIL-STD-1678-3 Revision C:2016 | Fiber Optic Cabling Systems Requirements and Measurements Physical, Mechanical, Environmental and Material Measurements (Part 3 of 6 Parts) |
| TIA/EIA 455-132 : A2001 | FOTP132 - MEASUREMENT OF THE EFFECTIVE AREA OF SINGLE-MODE OPTICAL FIBER |
| TIA 455-31 : C1995(R2013) | FOTP-31 - PROOF TESTING OPTICAL FIBERS BY TENSION |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.