MIL-PRF-6083 Revision G:2013
Current
Current
The latest, up-to-date edition.
Hydraulic Fluid, Petroleum Base, for Preservation and Operation
Available format(s)
PDF
Language(s)
English
Published date
26-04-2013
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Defines the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54 degrees C to +135 degrees C temperature range.
| DevelopmentNote |
Supersedes MIL H 6083. (04/2004) G NOTICE 1 - Notice of Validation. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
15
|
| ProductNote |
NEW CHILD NOT 1 2018 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification describes the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54¿C to +135¿C temperature range (see 6.1). This fluid is rust inhibited and used both as a preservative for hydraulic systems and components as well as being an operational fluid. This hydraulic fluid will not be used for aircraft systems, aircraft ground support equipment, or the preservation of aircraft components. The hydraulic fluid is identified by Military Symbol OHT and NATO Symbol C-635.
| SAE ARP5796 | Flight Critical Control Valves, Military Aircraft |
| SAE AS4841B | Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL-DTL-62421 Revision A:2009 | Control, Unit, Electronic, Digital |
| MIL-DTL-9395-31 Revision E:2006 | Switches, Pressure, (Gage), Type II, 5 Amperes |
| MIL-DTL-9395-6 Revision C:2006 | Switches, Pressure (Absolute), Type I, SPDT, 3 Amperes |
| SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| MIL-STD-419 Revision E:2010 | Cleaning, Protecting, and Testing Piping, Tubing, and Fittings for Hydraulic Power Transmission Equipment |
| MIL-STD-107 Revision J:2001 | Preparation and Handling of Industrial Plant Equipment (IPE) for Shipment and Storage (No S/S Document) |
| MIL-DTL-5523 Revision E:2011 | Valve; Relief, Hydraulic Pressure |
| MIL-DTL-24694 Revision A:2011 | Valve, Hydraulic Relief, 1.5 - 35 Bars (22 - 500 Pounds Per Square Inch) Cartridge Type, General Specification for |
| MIL-DTL-62366 Revision D:2010 | Ring Assemblies, Electrical Contact |
| MIL-DTL-28827-1 Revision C:2011 | Switch, Thermostatic (Volatile Liquid), Hermetic Sealed, Single Pole Double Throw (SPDT), Medium Response Time |
| SAE AS4875A | Fittings, Straight Threaded Boss or Flanged, Fluid Connection |
| SAE AMSP5510A | O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) |
| MIL-DTL-81716 Revision A:2009 | Packing, Preformed, Straight Thread Tube Fitting Boss, Type II Hydraulic (-65 Degrees F to +275 Degrees F ) |
| SAE AIR5358A | Landing Gear Shock Strut Hydraulic Fluid |
| MIL-PRF-62382 Revision C:2011 | Valve, Hydraulic, Pressure Relief (Metric) |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| MIL-DTL-62420 Revision B:1998 | Periscope, Tank |
| MIL-DTL-9395-40 Revision C:2006 | Switches, Pressure, (Gage), Type II, Low Level to 5 Ampere |
| MIL-PRF-32058 Revision B:2017 | Chock, Wheel-Track - Aviation, Adjustable Rope Type |
| BWB TL 8100-0059 : 3ED 2008 | PACKING OF RADIATORS AND RADIATOR COMPONENTS FOR MOTOR VEHICLES - PACKING LEVELS A AND B |
| MIL-DTL-9395-1 Revision D:2006 | Switches, Pressure (Gage), Type II, SPDT, 3 Amperes |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-9395-5 Revision F:2014 | Switches, Pressure, (Gage), Type II, SPST, 5 Amperes |
| MIL-DTL-9395-27 Revision G:2006 | Switches, Pressure, Gauge (Type II), 3 Amperes |
| MIL-PRF-62430 Revision B:2010 | Harness Assembly, Thermocouple |
| SAE AMSR7362A | Nitrile Rubber, Synthetic, Solid, Sheet, Strip and Fabricated Parts, Synthetic Oil Resistant |
| MIL-DTL-9395-26 Revision D:2006 | Switches, Pressure, Absolute (Type I), 3 Amperes |
| MIL-DTL-71172 Revision B:2005 | Cylinder, Recuperator, Recoil, M119A1/A2 Howitzer Light, Towed: 105MM |
| MIL-PRF-62365 Revision C:1997 | Motor, Hydraulic, Constant Displacement |
| MIL-DTL-9395-8 Revision E:2006 | Switches, Pressure, (Gage), Type II, SPDT, 10 Amperes |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| MIL-PRF-32287 Revision A:2011 | Packing, Preformed, Petroleum Hydraulic Fluid Resistant |
| MIL-DTL-9395-29 Revision C:2006 | Switches, Pressure, (Differential) (Type III), 4 Amperes |
| SAE AS4459B | Fittings, Tube, Fluid System 3000 psig (21 000 kPa) Rated Pressure, Externally Swaged, Specification For |
| MIL-DTL-45150 Revision M:2012 | Chassis, Trailer, 2-Wheel Cart Type 2-1/2 Ton |
| MIL-DTL-5516 Revision D:2008 | Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| MIL-PRF-46170 Revision E:2013 | Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544 |
| MIL-DTL-62548 Revision C:2010 | Lead, Ignition |
| MIL-DTL-46821 Revision D:1998 | Loader-Transporter, Guided Missile: XM501E3 (Improved Hawk) |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| MIL-DTL-45150 Revision N:2015 | Chassis, Trailer, 2-Wheel Cart Type 2-1/2 Ton |
| SAE AS4842A | Fittings and Bosses, Pipe Threaded, Fluid Connection |
| MIL-DTL-5508 Revision C:2007 | Fuses, Aircraft Automatic Quantity-Measuring, Hydraulic |
| MIL-DTL-24630 Revision A:2014 | Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for |
| MIL-DTL-46725 Revision D:1998 | Valve, Four-Way, Hydraulic, Manual |
| SAE AS4843A | Fittings, Beaded, Fluid Connection |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-62073 Revision H:2011 | Trailer, Flatbed: 4-, 5-, and 7.5-Ton, 4-Wheel (Tandem) Cart Type; Trailer, Bolster: 4-Ton, 4-Wheel (Tandem) (No S/S Document) |
| MIL-DTL-9395-33 Revision C:2006 | Switches, Pressure, (Differential), Type III, 5 Amperes |
| MIL-DTL-5521 Revision C:2007 | Washer, Aircraft Hydraulic Packing Back-Up |
| SAE J1776_201402 | Marine Vehicles - Hydraulic System Pumps and Motors - Design and Specification Guide |
| MIL-DTL-9395-32 Revision D:2006 | Switches, Pressure, Differential (Type III), 4 Amperes |
| MIL-DTL-9395-38 Revision C:2006 | Switches, Pressure, (Gage) Type II, Low Level to 5 Amperes |
| SAE AIR4543C | Aerospace Hydraulics and Actuation Lessons Learned |
| SAE AMSP5315B | Acrylonitrile-butadiene (NBR) Rubber For Fuel-Resistant Seals 60 to 70 |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ASTM D 4898 : 2016 : REDLINE | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| MIL-PRF-46170 Revision E:2013 | Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544 |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| ASTM D 6547 : 2016 : REDLINE | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| ASTM D 972 : 2016 : REDLINE | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| SAE AMS3217/2C | Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75 |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.