MIL-S-8802 Revision F:1990
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (S/S BY SAE-AMS-S-8802)
Available format(s)
PDF
Published date
07-03-1990
Publisher
Superseded date
01-05-1999
€16.67
Excluding VAT
Covers temperature-resistant -65 to +250 degrees F (-54 deg to +121 deg C) two component synthetic rubber compounds for sealing and repairing integral fuel tanks & cell cavities.
| DevelopmentNote |
Inactive for new design
|
| DocumentType |
Standard
|
| Pages |
55
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
This specification covers temperature-resistant -65 Deg. F to +250 Deg. F (-54 Deg. C to +121 Deg. C), two component synthetic rubber compounds of the polysulfide type for sealing and repairing integral fuel tanks and fuel cell cavities.
| Standards | Relationship |
| SAE AMSS8802D | Similar to |
| ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 | Standard Guide for Selecting Cleaning Agents and Processes |
| MIL-STD-1689 Revision A:1990 | FABRICATION, WELDING, AND INSPECTION OF SHIPS STRUCTURE |
| MIL STD 001303 : C | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE (S/S BY SAE-AMS3277, SEE NOTICE 1 FOR ADDITIONAL INFORMATION) |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-A-38267 Revision A:1971 | Application of Polyurethane Fuel Tank Coatings (No S/S Document) |
| MIL-HDBK-1587 Base Document:1996 | Materials and Process Requirements for Air Force Weapons Systems (S/S by MIL-STD-1587) |
| MIL-DTL-25027 Revision H:1997 | Nut, Self-Locking 250 Degree F, 450 Degree F, and 800 Degree F (S/S by NASM-25027) |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F (S/S BY NASM8984) |
| MIL-N-8985 Base Document:1972 | NUT, SELF LOCKING STEEL, 180 KSI FTU, 450 DEGREE F (S/S BY NASM8985) |
| MIL-S-83318 Revision A:1991 | SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES (S/S BY SAE-AMS-S-83318) |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| ASTM D 6361 : 1998 | Standard Guide for Selecting Cleaning Agents and Processes |
| MIL-D-9063 Revision B:1965 | Desealant, Integral Fuel and Oil Tanks (S/S by MIL-R-81294) |
| MIL-STD-1516 Revision B:1990 | Unified Code for Coating and Finishes for DOD Materiel (No S/S Document) |
| MIL-C-83019 Base Document:1968 | Coating, Polyurethane, for Protection of Integral Fuel Tank Sealing Compound |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| SAE AS7200/1B | National Aerospace and Defense Contractors Accreditation Program (Nadcap) Audit and Inspection Procedures and Checklists for the Sealant Manufacturers Accreditation Program |
| ASTM D 6361/D6361M : 1998 : R2015 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM E 990 : 2013 : REDLINE | Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels |
| MIL-C-83982 Base Document:1974 | Compound, Sealing, Fluid Resistant (S/S by MIL-S-81733) |
| MIL-C-27725 Revision B:1969 | Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks (S/S by SAE-AMS-C-27725) |
| MIL-S-12840 Revision H:1992 | Saddle Assembly: Steel and Plywood, for 24-Ton, 2-Part Pneumatic Float, Ponton Bridge (No S/S Document) |
| MIL-A-62473 Revision B:1992 | Armor: Aluminum-Aramid, Laminate Composite |
| MIL-STD-1303 Revision B:1975 | Painting of Naval Ordnance Equipment (No S/S Document) |
| MIL-STD-1547 Revision B:1992 | Electronic Parts, Materials, and Processes for Space and Launch Vehicles |
| NASA KSC TM 584 : 1994 | CORROSION CONTROL AND TREATMENT MANUAL |
| MIL-HDBK-349 Base Document:1994 | Manufacture and Inspection of Adhesive Bonded, Aluminum Honeycomb Sandwich Assemblies for Aircraft |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| JSSG-2006 Base Document:1998 | Aircraft Structures |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL S 44408 : B | SHELTER, NON-EXPANDABLE, RIGID WALL (67 INCHES HIGH BY 84 INCHES WIDE BY 102 INCHES LONG) |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-STD-403 Revision C:1992 | Preparation for and Installation of Rivets and Screws, Rocket, Missile, and Airframe Structures |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL-HDBK-1568 Base Document:1996 | Material and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems (S/S by MIL-STD-1568) |
| MIL-W-5013 Revision L:1991 | Wheel and Brake Assemblies, Aircraft General Specification For |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| QQ-A-250-12 Revision F:1982 | Aluminum Alloy 7075, Plate and Sheet (See Notice 3 for Replacement Information) |
| PPP-C-96 Revision E:1992 | Cans, Metal, 28 Gage and Lighter |
| FED-STD-601 Base Document:1955 | Rubber: Sampling and Testing |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| PPP-B-636 Revision J:1981 | Boxes, Shipping, Fiberboard (S/S by ASTM-D1974 and ASTM-D5118) |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE (S/S BY SAE-AMS-S-4383) |
| MIL-STD-147 Revision E:2008 | Palletized Unit Loads |
| SAE AMS3819C | Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces |
| MIL-C-27725 Revision B:1969 | Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks (S/S by SAE-AMS-C-27725) |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE (S/S BY SAE-AMS-T-9046) |
| MIL P 38714 : A | PACKAGING AND PACKING OF TWO COMPONENT MATERIALS IN SEMKITS |
| MIL-STD-453 Revision C:1984 | Inspection, Radiographic (S/S By ASTM-E1742) |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON (S/S BY ASTM-D471) |
| MIL-C-38736 Revision B Base Document:1984 | Cleaning Compound, Solvent Mixtures (Metric) (S/S by A-A-59281) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-C-38334 Revision A:1971 | Corrosion Removing Compound, Prepaint, for Aircraft Aluminum Surfaces (S/S by SAE-AMS1640) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| PPP-D-729 Revision E:1977 | Drums, Shipping and Storage, Steel, 55-Gallon (208 Liters) |
| SAE AMS2629E | Fluid, Jet Reference |
| ASTM D 1125 : 2014 : REDLINE | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| O-O-670 Revision C:1991 | ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL (S/S BY A-A-55820) |
| TT-I-735 Revision A:1963 | Isopropyl Alcohol |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| MIL-C-87936 Revision A:1985 | Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable (S/S by MIL-C-87937) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.