MIL-STD-1188 Revision A:1978
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
COMMERCIAL PACKAGING OF SUPPLIES AND EQUIPMENT
Available format(s)
PDF
Withdrawn date
23-07-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| Supersedes |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| DOD-A-82720 Base Document:1982 | ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC) |
| MIL-P-80249 Revision A:1982 | PLATING UNIT, SELECTIVE (BRUSH) PORTABLE |
| MIL P 17667 : D | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON CORROSIVE) |
| MIL-P-52281 Revision B:1978 | PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES |
| MIL-C-1173 Revision E:1976 | CART, GENERAL HAULING |
| DOD-P-51455 Base Document:1979 | POTASSIUM CARBONATE, ANHYDROUS, TECHNICAL (METRIC) |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-G-52859 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 400 HERTZ, PU-760/M |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL-C-13766 Revision C:1983 | CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005 |
| MIL-R-22368 Revision D:1980 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS AND BOATS |
| MIL-T-52115 Revision B:1980 | THEODOLITE, SURVEYING, DIRECTIONAL ASTRONOMICAL 0.1 SECOND WITH ACCESSORIES. TRIPOD AND CASES. |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| MIL-D-3994 Revision C:1982 | DEXTRIN, TECHNICAL |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-B-48227 Revision A:1981 | BANDOLEERS, 40 MM AMMUNITION: SUPPORT, PLASTIC FOR |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL A 87136 : NOTICE 1 | ANTENNAS, AIRBORNE GENERAL SPECIFICATION FOR |
| MIL-C-44026 Base Document:1980 | CASE, LASER PROTECTIVE SPECTACLES |
| MIL-P-52854 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 30 KW, 50/60 HERTZ, AN/MJQ-10A |
| ASTM E 785 : 1981 : R2001 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| PPP-F-690 Revision D:1981 | FROZEN FRUIT, FROZEN FRUIT JUICES, AND FROZEN VEGETABLES, PACKAGING OF |
| MIL-A-63187 Base Document:1982 | ADHESIVE, POLYAMIDE EPOXY M753 8 INCH PROJECTILE |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
| MIL F 0051068 : E | FILTER, PARTICULATE, HIGH-EFFICIENCY, FIRE RESISTANT |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| MIL-S-14374 Revision C:1983 | SILICA GEL, IRON FREE |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL P 10813 : E | PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASES |
| MIL-P-43043 Revision C:1978 | PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED |
| MIL C 47257 : C | COMPOUND, EPOXY, FILAMENT WINDING |
| MIL-L-14519 Revision C:1978 | LIMESTONE, PULVERIZED |
| MIL-P-47271 Revision A:1983 | PAPER, INSULATING, ELECTRICAL |
| MIL-B-43550 Revision A:1979 | BAG, WATER REPELLENT, SIGNAL EQUIPMENT, BG 102 VALIDATED JUN 1972 |
| MIL E 6060 : D | ENVELOPE, PACKAGING WATER VAPOR PROOF, FLEXIBLE |
| MIL-E-63300 Revision A:1981 | ELECTRONIC ASSEMBLY FOR MINE, ANTIPERSONNEL, HE, M74 |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| MIL-C-11260 Revision D:1980 | CLAMP, HANDLE, STEEL TAPE |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| MIL-N-63396 Base Document:1981 | NETWORK, RESISTOR FIXED & ADJUSTABLE |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-T-52993 Base Document:1981 | TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE |
| MIL-P-46124 Revision B:1978 | PLASTIC MOLDING AND EXTRUSION MATERIAL, IONOMER RESINS |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 786 : 1981 : R2001 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM A 809 : 2008 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM E 785 : 1981 : R2011 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM E 786 : 1981 : R2006 | Standard Specification for Dishes, Evaporating, Platinum |
| PD IEC/PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| MIL-C-47221 Revision A:1982 | COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL |
| ASTM E 786 : 1981 : R1996 : EDT 1 | Standard Specification for Dishes, Evaporating, Platinum |
| MIL-P-52979 Base Document:1980 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 60 KW, 50/60 HERTZ, AN/MJQ-12A |
| MIL M 51103 : B | MAGNESIUM OXIDE, TECHNICAL |
| MIL-R-63993 Revision A:1988 | RESISTOR NETWORK, THICK FILM, FIXED AND TRIMMABLE |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-A-52568 Revision C:1982 | AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR |
| MIL-P-50002 Revision B:1981 | PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
| MIL B 48228 : A | BANDOLEERS FOR CARTRIDGES: 40 MM AMMUNITION |
| MIL-P-20385 Revision E:1982 | PROTRACTORS, SEMICIRCULAR, PLASTIC, GRADUATED IN MILS, YARDS, METERS AND INCHES |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL-G-53010 Base Document:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 100 KW, 50/60 HERTZ, PU-495B/G |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| MIL-T-11674 Revision F:1982 | TRIPOD, SURVEYING, FOR RANGE POLE |
| MIL-E-83510 Revision A:1980 | EARPHONE ELEMENT |
| MIL-W-52875 Revision B:1983 | WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| MIL-S-53018 Base Document:1983 | SEALER, WELD THROUGH FOR OVERLAPPING SURFACES |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-A-45877 Revision A:1983 | ADAPTER, CONNECTOR: W5F1 (TRAINING) AND CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL: W6FE (TRAINING) |
| MIL-M-63508 Base Document:1982 | MINE, METAL PARTS FOR MINES: BLU-91/B AND BLU-92/B |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| MIL-B-18147 Revision C:1983 | BOATS AND CRAFT; PREPARATION FOR DELIVERY OF |
| MIL-S-11039 Revision E:1978 | SLOTTED TEMPLATE, RADIAL ARM, PHOTOGRAMMETRIC SET VALIDATED DEC 1975 |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| MIL A 417 : G | ADAPTER, PRIMING: M1A4 |
| MIL-M-63323 Revision A:1981 | MICROCIRCUIT, LINEAR, VOLTAGE COMPARATORS |
| MIL-B-27497 Revision C:1978 | BEARING, JEWEL, SAPPHIRE OR RUBY, SYNTHETIC |
| MIL G 52888 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 100 KW, 50/60 HERTZ, PU-495A/G |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| MIL-B-43965 Revision A:1982 | BAG, WET WEATHER CLOTHING: (PARKA AND TROUSERS) |
| MIL F 1224 : D | FITTINGS, TUBE, BRASS OR BRONZE, 45 DEGREE FLARED |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| MIL P 51395 : A | POWER SUPPLY, CHEMICAL AUTOMATIC ALARM, ABCA-M10 |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| DOD-I-51064 Revision D:1979 | |
| MIL-P-265 Revision C:1981 | POLYVINYL ALCOHOL, GRANULAR (METRIC) |
| MIL-P-52855 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE 15 KW, 400 HERTZ AN/MJQ-15 |
| ASTM A 740 : 1998 : R2008 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM A 740:1998 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM E 786 : 1981 : R2017 | Standard Specification for Dishes, Evaporating, Platinum |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-S-10858 Revision H:1983 | SHIRT, COLD WEATHER, FIELD WOOL/NYLON, OLIVE GREEN 108 |
| MIL-M-51282 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1 |
| MIL-T-47287 Revision A:1980 | TUBE, SPIRAL WRAP, POLYTETRAFLUOROETHYLENE AND POLYAMIDE |
| MIL-G-52552 Revision B:1981 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU656/G |
| MIL-G-52537 Revision C:1980 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU-375B/G |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
| MIL-H-1987 Revision G:1980 | HELMET, FIRE FIGHTERS |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-STD-1423 Base Document:1979 | THIN LAYER CHROMATOGRAPHY PRECOATED PLATES AND SHEETS |
| MIL-G-52495 Revision B:1980 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 5 KW 60 HERTZ PU618/M |
| MIL A 46118 : D | ALUMINUM ALLOY ARMOR, 2219, ROLLED PLATE AND DIE FORGED SHAPES |
| MIL-T-51398 Revision A:1979 | TEST SET, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M74 |
| MIL P 60340 : A | PROJECTILE, 155MM, SMOKE, HC, BE, M116E2, PARTS FOR |
| MIL D 39030 : B | DUMMY LOAD, ELECTRICAL, COAXIAL AND STRIPLINE |
| MIL-G-52858 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 50/60 HERTZ, PU-406B/M |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL-S-14022 Revision A:1983 | SODIUM PERBORATE, TETRAHYDRATE |
| MIL-P-46111 Revision C:1978 | PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT) |
| MIL-G-52636 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-625/G |
| MIL-R-43608 Revision A:1981 | RIP CORD, PARACHUTE, PERSONNEL: GENERAL SPECIFICATION FOR |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL T 52777 : A NOTICE 1 | TANK, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC |
| MIL-T-3901 Revision E:1981 | TROUSERS, FIREMENS |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL-M-48752 Base Document:1975 | MINE, ANTI-TANK, PRACTICE, XM76 |
| MIL-C-11866 Revision C:1980 | CASTINGS, PRECISION, NONFERROUS |
| GG-A-440 Revision C:1981 | ALIDADE, SURVEYING, TELESCOPE |
| MIL-R-45036 Revision D:1978 | RUBBER, HARD,(EBONITE) NATURAL OR SYNTHETIC, SHEET, STRIP, ROD, TUBING AND MOLDED PARTS |
| MIL-M-46861 Revision B:1991 | MOLDING MATERIAL, GLASS MAT, EPOXY COATED |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL-B-17397 Revision D:1983 | BITTS, CLEATS, AND CHOCKS |
| MIL-B-63512 Base Document:1982 | BODY ASSEMBLY FOR MINE, ANTI PERSONNEL, BLU 92 B |
| MIL-G-52902 Revision A:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, PU-751/M |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL-M-3281 Revision A:1982 | MANGANESE DIOXIDE, TECHNICAL |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-A-20383 Revision D:1982 | ARROW SETS, SURVEYING |
| MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
| MIL-L-11566 Revision C:1978 | LEVEL, LEVEL ROD |
| MIL-S-13943 Revision B:1983 | SODIUM SULFATE, ANHYDROUS, TECHNICAL |
| MIL-C-496 Revision D:1992 | CLIP, END, STRAP |
| DOD N 10461 : B | NAPHTHENIC ACID, TECHNICAL (METRIC) |
| MIL-A-52401 Revision B:1974 | ADAPTER, ARCTIC, DRIVE-TYPE PICKET |
| MIL-C-2440 Revision F:1992 | CONTAINER, METAL, FOR PROPELLING CHARGE |
| MIL-C-43724 Revision C:1983 | CAP, HOT WEATHER, OLIVE GREEN 507 |
| ASTM A 809 : 2008 : R2017 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| SAE AMSC22587 | Cartridges, Grease, 14 Ounce (for Cartridge-Type Grease Gun) |
| MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
| MIL P 50911 : A | PRIMING ASSEMBLY FOR DEMOLITION CHARGE ASSEMBLY M183 PARTS, LOADING, ASSEMBLY AND PACKING |
| DOD D 87934 : 0 | DESICCANT, MOLECULAR SIEVE (IMPREGNATED (METRIC) |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| MIL-S-10385 Revision F:1979 | SANDTRAP ASSEMBLY [FOR PORTABLE 6 INCH PETROLEUM PIPELINE |
| MIL-C-63403 Base Document:1980 | CONTAINER, AMMUNITION PLASTIC, PA-83 |
| MIL-T-5684 Revision B:1981 | TIE RODS; ROUND AND SQUARE, AIRCRAFT |
| MIL-M-63324 Revision A:1981 | MICROCIRCUIT, DIGITAL, CMDS, SPECIAL PURPOSE NOR GATE |
| MIL-C-1258 Revision D:1983 | CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL-B-18-51 Revision D:1985 | BATTERY, DRY, BA-223/U |
| MIL-T-10086 Revision H:1980 | TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED |
| MIL-I-51072 Revision C:1979 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMOURED VEHICLE, M20A1 |
| MIL-L-43579 Revision C:1982 | Liner, Trousers, Chemical Protective (No S/S Document) |
| MIL-J-43470 Revision B:1982 | JACKET, AIR TO GROUND IDENTIFICATION |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL-B-2029 Revision F:1983 | BURNER ASSEMBLY, SPACE HEATER |
| MIL-W-52874 Revision B:1983 | WATER QUALITY ANALYSIS SET, ENGINEER |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| MIL-C-14264 Revision A:1978 | CALCIUM PHOSPHATE, TRIBASIC, TECHNICAL |
| MIL-C-11569 Revision D:1979 | CLAMPS, HOSE, WATER, UNIVERSAL 3/8- TO 1-INCH AND 1- TO 3-INCH |
| MIL-P-10398 Revision C:1982 | PHOSPHORUS TRICHLORIDE, TECHNICAL |
| MIL-H-43048 Revision B:1981 | HOOD, FLEXIBLE, GASOLINE RESISTANT, PROTECTIVE |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-B-63369 Base Document:1981 | BOOSTER ASSEMBLY, INERT FOR DEMOLITION KIT CRATERING, TRAINING, XM270 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL-C-11760 Revision D:1979 | CLAMPS, HOSE, PNEUMATIC, FOR UNIVERSAL COUPLINGS |
| MIL-C-63325 Base Document:1979 | COUPLING, FLUSH-LATCH ASSEMBLY AND METAL PARTS FOR |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| MIL-M-46891 Revision A:1980 | MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED |
| MIL-N-63400 Base Document:1981 | NETWORKS CAPACITOR-RESISTOR |
| MIL-R-51397 Revision C:1981 | REFILL KIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M229 |
| MIL-P-46125 Revision A:1980 | PROJECTILE CUBES, FRAGMENT-SIMULATING |
| MIL-B-83665 Revision B:1981 | BAG, PILOT RELIEF (MALE) |
| MIL-R-63319 Revision A:1981 | RESISTOR NETWORK, FIXED, FILM (EXTERNALLY TRIMMABLE) |
| MIL-G-52538 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 10KW 60 HERTZ PU-332A/G |
| MIL-S-52781 Revision A:1979 | STRIP, MARKING, ALUMINUM |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-T-46114 Revision B:1978 | TAPE, GLASS-SETTING, RUBBER, UNCURED (FOR SEALING GLASS WINDOWS) |
| GG-S-773 Revision D:1978 | STRAIGHTEDGES: PLASTIC AND WOOD |
| MIL-L-43466 Revision C:1981 | Liner, Extreme Cold Weather, Parka (No S/S Document) |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-M-50974 Revision C:1983 | MOTOR DETONATOR ASSEMBLY, ROCKET, LOADING ASSEMBLING AND PACKING (FOR DEMOLITION KIT, CRATERING M180) |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| ASTM E 785 : 1981 : R2006 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| MIL-L-52052 Revision D:1980 | LIFE PRESERVER, PARACHUTIST TYPE B-7 |
| MIL-B-41818 Revision G:1982 | BOOTS, COMBAT, LEATHER, BLACK, (MIL-5) |
| MIL-P-44012 Revision A:1979 | PACK, PARACHUTIST'S, DRAGON MISSILE |
| MIL-Z-12061 Revision B:1983 | ZINC CARBONATE, BASIC, TECHNICAL |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-C-43563 Revision A:1982 | CAP, SERVICE, ARMY BAND, BLUE |
| MIL-C-47118 Revision A:1979 | COATING, CONDUCTIVE LACQUER |
| MIL-M-63321 Revision A:1981 | MICROCIRCUIT, DIGITAL, CMOS (FINAL LOGIC) |
| MIL C 11053 : F | COUPLING ASSEMBLIES, HOSE (CHEMICAL, 3/4 AND 1-INCH) |
| MIL-C-87165 Base Document:1983 | COLLAR, JACKET, DETACHABLE CWU-63/P |
| MIL-C-70441 Base Document:1983 | CASE, BRASS, CALIBER .30, NATIONAL MATCH |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL-B-43064 Revision C:1981 | BINDER, LOOSE LEAF (EQUIPMENT LOGBOOK) |
| MIL-F-51477 Base Document:1982 | FILTER, PARTICULATE, HIGH EFFICIENCY, FIRE RESISTANT, BIOLOGICAL USE, GENERAL SPECIFICATION FOR |
| MIL-P-52897 Revision A:1982 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 10 KW, 50/60 HERTZ, AN/MJQ-18 |
| MIL L 3572 : A | LUBRICANT, COLLOIDAL GRAPHITE IN OIL |
| MIL P 11720 : D NOTICE 1 | PROTRACTOR, RECTANGULAR (PLASTIC, 1 3/4 INCHES BY 6 INCHES) |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL-T-43932 Revision C:1980 | TROUSERS, UTILITY (DURABLE PRESS) |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| ASTM A 740 : 1998 : R2003 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM E 785 : 1981 : R2017 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-C-47175 Revision A:1980 | Compound, Polyurethane, for Conformal Coating of Electronic Circuitry |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| MIL-P-1680 Revision D:1982 | POUCH, KNIFE, MEATCUTTERS, AND STEEL HOLDER [FOR BELT ATTACHMENT] |
| MIL-B-52808 Revision A:1979 | BOXES, STORAGE, PHOTOMAPPING, PAPER ROLL |
| MIL-S-43959 Revision A:1979 | SWEAT SHIRT, ZIPPER FRONT |
| MIL-C-47116 Revision A:1979 | COATING, EPOXY-AMINE |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL-B-43395 Revision A:1981 | BELL, SANCTUS |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| MIL-W-10842 Revision A:1982 | WAX, MICROCRYSTALLINE (METRIC) |
| DOD-T-46151 Revision A:1979 | TAPE,ADHESIVE, RUBBER (METRIC) |
| MIL-I-47199 Revision A:1980 | INSULATING COMPOUND, ELECTRICAL, LOW VISCOSITY, SILICONE RUBBER |
| MIL-L-52841 Revision A:1981 | LABORATORY, FIELD, TRAILER, CHASSIS MOUNTED, FOR DEVELOPING PIPELINE WELD RADIOGRAPHS |
| MIL-S-63348 Revision A:1981 | SUBMACHINE GUN, 5.56MM, PORT FIRING, M231 |
| DOD-A-10825 Revision A:1979 | ALUMINUM OXIDE, ANHYDROUS, ANALYZED REAGENT (METRIC) |
| MIL-S-12511 Revision G:1983 | SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH |
| MIL-E-10853 Revision C:1981 | ETHYLCELLULOSE, TECHNICAL (METRIC) |
| MIL-C-52707 Revision D:1983 | COVER, FOXHOLE OVERHEAD PROTECTION |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| MIL F 10943 : B | FATTY ACIDS |
| MIL-E-51454 Revision A:1994 | ETHYL ALCOHOL (ETHANOL) |
| MIL-S-45180 Revision D:1984 | SEALING COMPOUND,GASKET,HYDROCARBON FLUID AND WATER RESISTANT |
| MIL T 52849 : C | TEST KIT, PETROLEUM; AVIATION FUEL CONTAMINATION (PORTABLE) |
| GGG-B-485 Revision B:1978 | BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE) |
| MIL-D-51389 Revision A:1979 | DETECTOR UNIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M43 |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| MIL B 11040 : E | BELT, V: ENGINE ACCESSORY DRIVE |
| ASTM E 784 : 1989 : R2017 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-T-1180 Revision D:1981 | THERMOMETER, SELF-INDICATING LIQUID IN GLASS |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| MIL-C-14039 Revision C:1981 | COMPASS, SUN, UNIVERSAL TYPE 0 TO 90 DEGREES, NORTH AND SOUTH LATITUDES, WITH CARRYING CASE |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL D 53015 : NOTICE 2 | DISPLACEMENT & EVACUATION KIT, 6 INCH HOSELINE |
| MIL-B-1851 Revision F:1981 | BAND, HELMET |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| MIL-P-52559 Revision B:1974 | PIPE STEEL WEIGHT COATED, FOR SUBMARINE PIPELINE SYSTEMS |
| MIL R 55083 : A | RELAY ASSEMBLY RE-181/MSA-7 |
| MIL-A-47074 Revision A:1983 | ADHESIVE SYSTEM, EPOXY, FOR DISSIMILAR METAL BONDING |
| MIL-P-46892 Revision A:1980 | PLASTIC MOLDING MATERIAL, EPOXY, GLASS FIBER |
| MIL-S-1820 Revision G:1986 | SMOCK, FOOD INSPECTORS |
| MIL-E-7125 Revision A:1982 | ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL |
| MIL-T-1870 Revision J:1983 | TROUSERS, COLD WEATHER, MENS, FIELD, WOOL |
| MIL S 87966 : NOTICE 1 | SAFETY EQUIPMENT FALL ARRESTING |
| MIL-P-3631 Revision C:1981 | PARALLEL RULER (ROLLING) |
| MIL-M-64016 Base Document:1983 | MOTOR, ROCKET, METAL PARTS FOR AND LOADING ASSEMBLY FOR DEMOLITION KIT, CRATERING M180 |
| MIL-A-14053 Revision C:1977 | Antenna AT-450( )/ARC |
| MIL-C-47127 Revision A:1983 | CLOTH, POLYESTER FABRIC, CHLOROSULFONATED POLYETHYLENE COATED, FLAME RESISTANT |
| MIL-C-10015 Revision D:1982 | CHEST, TOOL KIT, EMPTY |
| MIL-B-11837 Revision C:1983 | BLOCKS, TACKLE (WIRE ROPE, SNATCH, EXTRA-HEAVY DUTY) |
| MIL-G-52857 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 400 HERTZ, PU-732/M |
| MIL-G-52856 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 50/60 HERTZ, PU-405 A/M |
| MIL-C-50870 Revision C:1981 | CARTRIDGE 40MM HEDP M433 LINER FOR METAL PART |
| MIL-T-52965 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM (TSS), DIRECT SUPPORT SECTION, TRUCK MOUNTED |
| MIL-F-43986 Revision A:1980 | FOLDER FILE, EQUIPMENT RECORD |
| MIL-L-43582 Revision B:1981 | Liner, Shirt, Chemical Protective (No S/S Document) |
| DOD U 10866 : D | UREA, TECHNICAL (METRIC) |
| MIL-P-14250 Revision C:1981 | PIN, STRAIGHT, HEADED AND PIN, STRAIGHT, HEADLESS, SLOTTED TEMPLET STUD |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| MIL-C-44009 Revision A:1982 | CHARGER, BATTERY, PP-7562/U |
| MIL-D-6998 Revision D:1978 | DICHLOROMETHANE, TECHNICAL |
| MIL-C-52370 Revision A:1978 | CASE, COMPUTER SUPPLIES, CARRYING |
| MIL C 43415 : C | CAP, SERVICE, MILITARY POLICE, WHITE |
| MIL-T-10629 Revision C:1978 | T-SQUARE [STEEL] |
| MIL-T-52877 Revision B:1980 | Transmission Group Data: Transmitter, Data: T-1257/FSS-9(V) and Receiver, Data: R-1861/FSS-9(V) |
| MIL-G-52622 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED, 5KW 60 HERTZ PU-631/G |
| DDD-C-628 Revision F:1981 | COVER, MATTRESS |
| MIL-B-2424 Revision D:1983 | BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| MIL-I-51484 Base Document:1982 | INSECTICIDE, D PHENOTHRIN (AEROSOL) |
| MIL R 10916 : D | ROD, LEVEL, GEODETIC |
| MIL P 47104 : A | POTTING COMPOUND, EPOXY RESIN, THERMOSETTING |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-M-63394 Base Document:1980 | MINE, ANTI-TANK: HE, M75 METAL PARTS FOR |
| MIL-B-30510 Revision B:1983 | BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK |
| MIL-P-3173 Revision B:1983 | POTASSIUM CARBONATE, TECHNICAL |
| MIL-S-3629 Revision F:1981 | STEREOSCOPES, LENS, AERIAL PHOTOGRAPH INTERPRETATION [POCKET] |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| MIL-B-82117 Revision D:1983 | BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION |
| MIL-C-14505 Revision D:1983 | CLOTH, NYLON, POLYCHLOROPRENE-COATED (FOR PNEUMATIC FLOATING EQUIPMENT) |
| MIL-P-46184 Base Document:1982 | PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) |
| MIL-T-49305 Base Document:1989 | Test Set, Countermeasure Set TS-3609( )/ALQ-156(V) (No S/S Document) |
| ZZ-T-831 Revision D:1978 | TUBING, RUBBER AND PLASTIC |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL-M-63320 Revision A:1981 | MICROCIRCUIT, DIGITAL, CMOS (INITIAL LOGIC) |
| MIL V 11201 : E | VALVE, SAFETY RELIEF, ANGLE, BRASS OR BRONZE, EXTRA-HEAVY, FOR GASOLINE SERVICE |
| MIL-R-63322 Revision A:1981 | RESISTOR NETWORK, FIXED, FILM (EXTERNALLY TRIMMABLE) |
| MIL-D-29362 Revision B:1991 | DECALS (HEAT TRANSFER): USMC |
| MIL-C-58104 Revision A:1983 | COVER, PROTECTIVE FOR PARTS AND EQUIPMENT |
| ASTM E 786 : 1981 : R2011 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM A 740 : 1998 : R2014 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM A 809 : 2008 : R2013 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM PS 7 : 1995 | Specification for Iodotrifluorome Thane CF3I (Withdrawn 1997) |
| ASTM E 785 : 1981 : R1996 : EDT 1 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| IEC PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.