• MIL-STD-1520 Revision C:1986

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    CORRECTIVE ACTION AND DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL

    Available format(s):  PDF

    Withdrawn date:  27-02-1995

    Language(s): 

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
    1.1 Purpose
    1.2 Application
    1.3 Change notice and revisions
    2 Referenced documents (not applicable)
    3 Definitions
    3.1 Control charts
    3.2 Control limits
    3.3 Corrective action
    3.4 Corrective Action Board (CAB)
    3.5 Material Review Board (MRB)
    3.6 Nonconformance
    3.6.1 Minor nonconformance
    3.6.2 Major/critical nonconformance
    3.7 Nonconforming material
    3.8 Occurrence
    3.9 Recurrence
    3.10 Preliminary Review (PR)
    3.11 Quality Improvement Project (QIP)
    3.12 Repair
    3.13 Rework
    3.14 Scrap
    3.15 Standard Repair Procedure (SRP)
    3.16 Statistical Process Control (SPC)
    3.17 Supplier
    3.18 Use-as-is
    3.19 Definitions of acronyms used in this standard
    4 General requirements
    4.1 Corrective action and disposition system
    4.2 Statistical Process Control (SPC)
    4.2.1 Control limit standards
    4.3 Quality improvement
    4.4 Contractor's written procedures
    4.5 Material Review Board (MRB)
    4.5.1 MRB authority and responsibilities
    4.6 Corrective Action Board (CAB)
    4.6.1 CAB authority and responsibilities
    4.7 Government rights
    5 Detailed requirements
    5.1 Identification and segregation of nonconforming
           material
    5.2 PR disposition
    5.3 MRB disposition
    5.4 Use-as-is dispositions
    5.5 Repair dispositions
    5.6 Scrapped material
    5.7 Nonconforming material documentation
    5.7.1 Additional documentation for MRB items
    5.7.2 Additional documentation for corrective action
    5.7.3 Recurring nonconformances
    5.7.4 Nonconformance costs
    5.8 Minimum data summarization requirements
    5.9 Control of material review and disposition system
           at suppliers
    5.9.1 Corrective action at supplier facilities
    5.9.2 Records of nonconforming material received from
           suppliers
    5.10 Audits
    6 Notes
    6.1 Intended use
    6.2 Changes from previous issue

    Abstract - (Show below) - (Hide below)

    Describes a cost effective corrective action and disposition system for non conforming material, which results in productivity and quality improvement. Coverage includes definitions, control limit standards, quality improvement, corrective action board (CAB), contractor's written procedures, material review board (MRB), and corrective action and disposition system.

    General Product Information - (Show below) - (Hide below)

    Committee AREA QCIC
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Withdrawn

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL H 38534 : B (1) HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR
    MIL-I-29589 Base Document:1991 INTERROGATOR SET, AN/UPX-24(V)
    SAE AS 7107 : 2017 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS
    MIL-STD-973 Base Document:1992 CONFIGURATION MANAGEMENT
    MIL-STD-481 Revision B:1988 CONFIGURATION CONTROL, ENGINEERING CHANGES, DEVIATIONS AND WAIVERS (SHORT FORM)
    MIL-P-83927 Revision B:1981 POWER SUPPLIES, GUIDED MISSILE LAUNCHERS, SINGLE TYPES PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, AND COMPOSITE TYPE PP-4506/A AND PS-1037
    MIL-HDBK-2097 Revision A:1997 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
    SAE AS 7106/2 : 2017 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CORRECTIVE ACTION AND DISPOSITION SYSTEM FOR NONCONFIRMING MATERIAL
    MIL-F-70823 Revision A:1994 FUZE, ELECTRONIC TIME, M762 LOADING, ASSEMBLING, PACKING AND FUZE, ELECTRONIC TIME, M767 LESS BOOSTER
    MIL-V-2961 Revision D:1990 VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE
    MIL-HDBK-61 Revision A:2001 CONFIGURATION MANAGEMENT GUIDANCE
    MIL A 87221 : 0 AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503
    MIL R 28750 : C SUPP 1 RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING
    MIL-V-2042 Revision E:1990 VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE
    MIL W 006729 : B (1) WATERTIGHTNESS OF AIRCRAFT, TESTING
    MIL-E-24759 Base Document:1991 REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE
    MIL-STD-980 Base Document:1982 FOREIGN OBJECT DAMAGE (FOD) PREVENTION IN AEROSPACE PRODUCTS
    MIL-F-71021 Base Document:1991 FUZE PROXIMITY, ARTILLERY: M732A2 (UNBOOSTERED)
    SAE AS 7106 : 2017 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) QUALITY PROGRAM REQUIREMENTS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective