MIL-STD-202-201 Base Document:2015
NA
Status of Standard is Unknown
Method 201, Vibration
English
18-04-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Establishes the effects on component parts of vibration within the predominant frequency ranges and magnitudes that may be encountered during field service.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
The vibration test is used to determine the effects on component parts of vibration within the predominant frequency ranges and magnitudes that may be encountered during field service. Most vibration encountered in field service is not of a simple harmonic nature, but tests based on vibrations of this type have proved satisfactory for determining critical frequencies, modes of vibration and other data necessary for planning protective steps against the effects of undue vibration. Vibration, by causing loosening of parts or relative motion between parts in the specimen, can produce objectionable operating characteristics, noise, wear, and physical distortion, and often results in fatigue and failure of mechanical parts.
| MIL-DTL-28788 Revision C:2010 | SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR |
| MIL-DTL-49092 Revision A:2016 | HEADSET-MICROPHONE H-325( )/TTC |
| MIL-PRF-24236 Revision D:2006 | SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR |
| MIL-DTL-55119 Revision B:2016 | ELECTRO-ACOUSTICAL TRANSDUCER EQUIPMENTS |
| MIL C 62 : F | CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR |
| MIL-DTL-22641 Revision G:2016 | ADAPTERS, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL-PRF-22710 Revision H:2013 | Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for |
| MIL-DTL-9419 Revision H:2016 | Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for |
| MIL-DTL-3786 Revision J:2013 | SWITCHES, ROTARY (CIRCUIT SELECTOR, LOW-CURRENT CAPACITY), GENERAL SPECIFICATION FOR |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
| MIL-PRF-3098-88 Revision J:2017 | Crystal Unit, Quartz, CR112/U |
| MIL-PRF-22 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-27-2 Revision G:2012 | TRANSFORMERS, AUDIO FREQUENCY |
| MIL-DTL-83729 Revision C:2013 | CHOPPERS, ELECTROMECHANICAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-PRF-87819 Revision B:2009 | HEADSET-MICROPHONE, (HEARING PROTECTIVE TYPE, HIGH AND MODERATE AMBIENT NOISE LEVELS), GENERAL SPECIFICATION FOR |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
| MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-DTL-55116 Revision D:2013 | CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
| MIL-PRF-3098-8 Revision G:2010 | CRYSTAL UNIT, QUARTZ, CR26/U |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| A-A-55519-3 Revision D:2017 | FUSE, INCLOSED LINK, SUBMINIATURE, SURFACE MOUNT (SM), VERY FAST ACTING, WITH WRAP AROUND TERMINALS |
| MIL-PRF-19978-3 Revision J:2016 | CAPACITOR, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL CASES), STYLE CQ72 |
| MIL-C-18312 Revision G:2013 | CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR |
| MIL-PRF-3098-68 Revision G:2010 | CRYSTAL UNIT, QUARTZ, CR91/U |
| MIL-DTL-3885 Revision H:2016 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL |
| MIL-PRF-15160-9 Revision G:2011 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F09 |
| MIL-DTL-7793 Revision H:2016 | METER, TIME TOTALIZING |
| DSCC 13031 : A | FUSE, INSTRUMENT, SUBMINIATURE |
| MIL-DTL-12883-40 Revision F:2003 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, MIL-PRF-83726, AND MS27709) |
| MIL-PRF-39018 Revision G:2009 | CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-12883-56 Revision A:2003 | Socket, Plug-in Electronic Components, for Relays, 1-Pole, 10 Amperes (MIL-PRF-83536/34 and /35) |
| MIL-DTL-83729-1 Revision F:2018 | CHOPPERS, ELECTROMECHANICAL, SINGLE POLE, DOUBLE THROW, BREAK BEFORE MAKE |
| MIL-PRF-15160 Revision L:2018 | Fuses, Instrument, Power, and Telephone General Specification for |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.