MIL-STD-2161 Revision C:2014
Current
The latest, up-to-date edition.
Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft
English
07-02-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - STANDARD MARKING, EMERGENCY AND
HAZARD WARNING MARKINGS FOR AIRCRAFT
APPENDIX B - SERVICING, GROUND HANDLING, HAZARD
WARNING MARKINGS, AND ARMAMENT PLACARD
FOR AIRCRAFT
APPENDIX C - PAINT SCHEMES AND MARKINGS
FOR FIXED WING AIRCRAFT
APPENDIX D - PAINT SCHEMES AND MARKINGS FOR
ROTARY WING AIRCRAFT
APPENDIX E - NATIONAL INSIGNIAS FOR FOREIGN
AIRCRAFT
CONCLUDING MATERIAL
Provides the requirements for paint schemes and markings to be applied to the exterior surfaces of U.S. Navy and Marine Corps aircraft, including those procured for other government agencies and foreign countries under Navy contracts.
| DocumentType |
Standard
|
| Pages |
219
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This military standard establishes the requirements for paint schemes and markings to be applied to the exterior surfaces of U.S. Navy and Marine Corps aircraft, including those procured for other government agencies and foreign countries under Navy contracts. The requirements for paint schemes and markings include size, color, and approximate placement locations, where applicable, as shown in Appendices A – E. This standard also provides a mechanism to obtain approval for deviation from these requirements.
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-STD-1247 Revision D:2009 | MARKINGS, FUNCTIONS AND HAZARDS DESIGNATIONS OF HOSE, PIPE, AND TUBE LINES FOR AIRCRAFT MISSILE, AND SPACE SYSTEMS |
| AFGS-87219 Revision B:2012 | ELECTRICAL POWER SYSTEMS, AIRCRAFT |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| MIL-DTL-18264 Revision E:2015 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
| SAE ARP 6161 : 2011 | FLIGHT COMPARTMENT GLARE |
| MS90327 Revision A:1966 | Aircraft Markings, Access Numbering System |
| MIL-G-25013 Revision E:1983 | GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372, METRIC |
| MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| MIL-PRF-83363 Revision E:2014 | GREASE, TRANSMISSION, HELICOPTER (NATO G-396) |
| MIL-PRF-6083 Revision G:2013 | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| SAE J1966_201108 | Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) |
| MIL-C-83413-9 Base Document:1984 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, DECALCOMANIA FOR GROUND RECEPTACLE IDENTIFICATION, DECAL |
| DOD L 25681 : D | LUBRICANT MOLYBDENUM DISULFIDE, SILICONE |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| SAE AMSG4343A | Grease, Pneumatic System |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| MIL-C-6529 Revision C:1958 | CORROSION PREVENTIVE, AIRCRAFT ENGINE |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| A-A-58092 Base Document:1997 | TAPE, ANTISEIZE, POLYTETRAFLUOROETHYLENE |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| MIL-PRF-81329 Revision E:2015 | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737 |
| MS29525 Revision F:1991 | CAP PRESSURE FUEL SERVICING, NOMINAL 2 1/2 INCH DIAMETER, FLUSH TYPE |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
| MIL-DTL-5020 Revision F:2015 | Liquid, Compass, Aircraft |
| A-A-51693 Revision A:1989 | ALCOHOL, DEHYDRATED USP |
| SAE AMS2518D | Thread Compound, Anti-Seize, Graphite-Petrolatum |
| MIL-PRF-8188 Revision D:1997 | CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| DDD-F-416 Revision F:2005 | Flag, National, United States of America and Flag, Union Jack |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MIL-PRF-6085 Revision E:2011 | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| SAE AMSG6032A | Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric |
| MIL-G-25537 Revision C:1984 | GREASE, AIRCRAFT, HELICOPTER OSCILLATING BEARING, NATO CODE NUMBER G-366, METRIC |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
| SAE AMSM7866 | Molybdenum Disulfide, Technical, Lubrication Grade |
| MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
| SAE J1899_201108 | Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| STANAG 1135 : 2017 | INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
| MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| MIL-PRF-6086 Revision F:2010 | LUBRICATING OIL, GEAR, PETROLEUM BASE (NATO O-153, O-155) |
| O-M-232 Revision M:2016 | METHANOL (METHYL ALCOHOL) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.