• Shopping Cart
    There are no items in your cart

MIL-STD-35-109 Base Document:1976

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, INDICATORS, POINTER

Available format(s)

PDF

Withdrawn date

20-07-2005

€17.95
Excluding VAT

1 INTRODUCTION
  1.1 Scope
  1.2 Purpose
  1.3 Format
  1.4 Military Specification, Exception Title Index
       1.4.1 Title
       1.4.2 Index
2 APPLICABLE DOCUMENTS
3 DEFINITIONS
4 GENERAL DESCRIPTION OF AEDS
5 DETAILED DESCRIPTION OF AEDS
  5.1 Introduction
  5.2 Specification Requirement Sheet (SRS)
  5.3 Specification Requirements
  5.4 Code 1006 Requirement and Test methods
  5.5 Approved Item Code
  5.6 Dimensions and Figures
  5.7 Applicable Documents
  5.8 Tabulation
  5.9 Design and Construction
       5.9.1 Indicator Scale Range
       5.9.2 Indicator Sub Scale Range
       5.9.3 Port Configuration
       5.9.4 Minimum Zero Adjust From Initial Point
       5.9.5 Hermetic Seal
       5.9.6 Case
       5.9.7 Pointer
       5.9.8 Cover Glass
       5.9.9 Parallax
       5.9.10 Bearings
       5.9.11 Lubrication
       5.9.12 Filling Media
       5.9.13 Electrical Receptacle
       5.9.14 Overload Protection
       5.9.15 Maximum Weight
       5.9.16 Dial Marking
       5.9.17 Indicator Input
       5.9.18 Indicator Power
       5.9.19 Lighting Circuit Voltage
  5.10 Acceleration
  5.11 Cold Junction Compensator Lag
  5.12 Current, Resistance Bulb
  5.13 Damping
  5.14 DC Resistance
  5.15 Dead Spot
  5.16 Dielectric Withstanding Voltage at Reduced
       Barometric Pressure
  5.18 Dielectric Withstanding Voltage at Sea Level
  5.19 Dust
  5.20 Effect of Lead Length
  5.21 Electromagnetic Interference
  5.22 Endurance
  5.22 Error, Friction
  5.23 Error, Pointer Zero Position
  5.24 Error, Position
  5.25 Error, Scale
  5.26 Fogging
  5.27 Frequency Cycling
  5.28 Fungus
  5.29 Helium Test
  5.30 Humidity
  5.31 Hysteresis
  5.32 Immersion
  5.33 Indication, Power Off
  5.34 Insulation Resistance
  5.35 Leakage, Diaphragm Capsule
  5.36 Life, Lamp
  5.37 Lighting
  5.38 Low Liquid Level arming Circuit
  5.39 Magnetic Effect
  5.40 Mounting Lugs
  5.41 Open and Short Circuit
  5.42 Operation, Reduced Voltage
  5 43 Overpressure
  5.44 Overspeed and Reverse
  5.45 Power Consumption/Indicator Current
  5.46 Press To Test Circuit
  5.47 Rain
  5.48 Reliability Screening (Burn-In, Aging, Conditioning,
       Stabilization, Load Overload)
  5.49 Resistance to Soldering Heat
  5.50 Response
  5.51 Salt Fog
  5.52 Seal
  5.53 Sensitivity
  5.54 Shock
  5.55 Solderability
  5.56 Starting And Warm up, Low Temperature
  5.57 Starting, Room Temperature
  5.58 Surge, Voltage
  5.59 Temperature - Altitude
  5.60 Temperature, High
  5.61 Temperature, Low
  5.62 Temperature Rise, Indicator
  5.63 Terminal, Strength
  5.64 Thermal Shock
  5.65 Unit Torque Gradient
  5.66 Variation, Voltage and Frequency
  5.67 Vibration
  5.68 Vibration, High Frequency
  5.69 Zero, Electrical
  5.70 Zero Error At Low Temperature
  5.71 Zero Error During Temperature Change

Describes detailed requirements of Indicators, Pointer.

Committee
AREA - EGDS
DevelopmentNote
NOTICE 3 - Notice of Group Cancellation without replacement. (08/2005)
DocumentType
Standard
Pages
248
PublisherName
US Military Specs/Standards/Handbooks
Status
Withdrawn

MIL-I-38391 Base Document:1965 INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE)
MIL-I-7062 Revision C:1975 INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR
MIL-I-83262 Revision B:1977 INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
ASTM E 380 : 1993 Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997)
MIL-I-5415 Revision C:1987 INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR
MIL I 38135 : B (3) INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY
MIL-I-7070 Revision B:1970 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
MIL I 83361 : (4) INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI
MIL-I-26299 Revision G:1990 INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-I-7084 Revision A:1988 INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI
MIL-I-81049 Revision A:1972 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION
MIL-I-6447 Revision C:1974 INDICATOR, TRUE AIRSPEED TYPE M 1A
MIL I 8411 : A NOTICE 1 INDICATOR, AIRFLOW, PRESSURIZED CABIN TYPE A-1
MIL-I-81388 Revision A:1971 INDICATOR REPEATERS, LIQUID OXYGEN QUANTITY
MIL-I-25437 Revision B:1984 INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR
MIL-L-27160 Revision C:1972 LIGHTING, INSTRUMENT, INTEGRAL, WHITE GENERAL SPECIFICATION FOR
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
MIL-I-22054 Revision A:1964 INDICATOR, PRESSURE, SYNCHRO, DUAL, GENERAL PURPOSE
MIL-I-25645 Revision D:1970 INDICATOR, LIQUID OXYGEN QUANTITY, CAPACITANCE TYPE, GENERAL SPECIFICATION FOR
MIL-I-7071 Revision B:1972 INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
MIL-I-7721 Revision D:1992 INDICATOR, VERTICAL SPEED, 3-INCH
MIL-STD-462 Revision D:1993 MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS
MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
MIL-I-81387 Revision A:1971 INDICATOR, LIQUID OXYGEN QUANTITY
MIL-I-23832 Revision A:1980 Indicator, Tachometer, Triple Pointer, Helicopter
MIL I 7069 : A NOTICE 1 INDICATORS, TACHOMETER, ELECTRIC, PERCENT SPEED TYPE, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-I-22126 Revision B:1972 INDICATOR, TORQUEMETER, ENGINE, TURBOPROP

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.