NACE RP 01 78 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FABRICATION DETAILS, SURFACE FINISH REQUIREMENTS, AND PROPER DESIGN CONSIDERATION FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE
Hardcopy , PDF
10-03-2007
English
01-01-2003
1. General
2. Definitions
3. Design requirements
4. Fabrication requirements
5. Surface finish requirements
Appendix A Fabrication details, surface finish requirements,
and proper design considerations for metal tanks
and vessels to be lined for immersion
Appendix B Suggested responsibilities
Appendix C Generic and graphic descriptions of various degrees
of Surface finishing of welds that may be specified
in preparation for lining of tanks and vessels
Gives requirements for the design, fabrication, and surface finish of tanks to be lined for immersion service.
| Committee |
STG 04
|
| DevelopmentNote |
Redesignated as NACE SP 01 78. (09/2007)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
National Association of Corrosion Engineers
|
| Status |
Superseded
|
| SupersededBy |
| NACE 6A100 : 0 | COATINGS USED IN CONJUNCTION WITH CATHODIC PROTECTION |
| NACE RP 03 02 : 2002 | SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE |
| API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| NACE RP 02 98 : 0 | SHEET RUBBER LININGS FOR ABRASION AND CORROSION SERVICE |
| NACE SP 05 92 : 2006 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN CONCENTRATED (90 TO 98%) SULFURIC ACID SERVICE |
| NACE RP 02 88 : 2004 | INSPECTION OF LININGS ON STEEL AND CONCRETE |
| NACE RP 02 95 : 0 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| NACE RP 03 86 : 2003 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF COVERED STEEL HOPPER RAIL CARS IN PLASTIC, FOOD, AND CHEMICAL SERVICE |
| NACE RP 06 92 : 2003 | APPLICATION OF A COATING SYSTEM TO EXTERIOR SURFACES OF STEEL RAIL CARS |
| NACE SP 01 81 : 2006 | LIQUID-APPLIED INTERNAL PROTECTIVE COATINGS FOR OILFIELD PRODUCTION EQUIPMENT |
| NACE 11 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
| API 652 CHINESE : 2014 | LINING OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| NACE RP 03 91 : 0 | MATERIALS FOR THE HANDLING AND STORAGE OF CONCENTRATED (90 TO 100%) SULFURIC ACID AT AMBIENT TEMPERATURES |
| API SPEC 12J : 2008 | SPECIFICATION FOR OIL AND GAS SEPARATORS |
| NACE RP 04 02 : 2002 | FIELD-APPLIED FUSION-BONDED EPOXY (FBE) PIPE COATING SYSTEMS FOR GIRTH WELD JOINTS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
| NASA KSC TM 584 : 1994 | CORROSION CONTROL AND TREATMENT MANUAL |
| API RP 652 : 2020 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| NACE RP 02 94 : 0 | DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF CONCENTRATED SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| NACE RP 05 92 : 0 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN CONCENTRATED (90 TO 98%) SULFURIC ACID SERVICE |
| NACE RP 01 84 : 1991 | REPAIR OF LINING SYSTEMS |
| NACE SP 02 94 : 2006 | DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| NACE SP 03 02 : 2007 | SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.