SAE AS 6171/3 : 2016
|
TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY X-RAY FLUORESCENCE TEST METHODS |
ASTM B 247M : 2015 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
I.S. EN 16603-32-01:2014
|
SPACE ENGINEERING - FRACTURE CONTROL |
SAE AMS A 21180 : 2017
|
ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH |
AWS C3.8M/C3.8 : 2011
|
SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS |
ASTM E 1030 : 2005 : R2011
|
Standard Test Method for Radiographic Examination of Metallic Castings |
PREN 4678 : 200P1
|
AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
ASTM E 690 : 2015 : REDLINE
|
Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
ASTM E 2700 : 2014 : REDLINE
|
Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
ASTM E 3100 : 2017
|
Standard Guide for Acoustic Emission Examination of Concrete Structures |
ASTM E 2698 : 2010
|
Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 703 : 2014 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM E 1571 : 2011 : R2016 : EDT 1
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
SAE AMS 2442 : 2012
|
MAGNETIC PARTICLE ACCEPTANCE CRITERIA FOR PARTS |
ASTM E 2984/E2984M : 2014
|
Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
ASTM E 1000 : 2016 : REDLINE
|
Standard Guide for Radioscopy |
SAE AMS STD 2154 : 2017-05
|
INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR |
ASTM E 2983 : 2014
|
Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
ASTM E 1955 : 2004 : R2009
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
ASTM E 2907/E2907M : 2013
|
Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
ASTM E 1444 : 2005
|
Standard Practice for Magnetic Particle Testing |
ASTM E 1004 : 2017 : REDLINE
|
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM E 1495/E1495M : 2017 : REDLINE
|
Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ASTM E 1817 : 2008
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1603/E1603M : 2011 : R2017
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 2581 : 2014 : REDLINE
|
Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM E 1312 : 2009 : R2013 : EDT 1
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
BS EN 4678:2011
|
Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments |
BS EN 4179:2017
|
Aerospace series. Qualification and approval of personnel for non-destructive testing |
MIL-DTL-63245 Revision C:2008
|
Projectile 155 Millimeter: HE, Metal Parts Assembly, M795 |
MIL A 12560 : H
|
ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
MIL-DTL-46594 Revision C:2011
|
Charge, Demolition, Shaped, 40 LB. M3A1 Loading, Assembling and Packing |
MIL-STD-2219 Revision A:2005
|
FUSION WELDING FOR AEROSPACE APPLICATIONS |
MIL-DTL-20517 Revision J:2011
|
Simulator, Projectile, Air Burst, M74A1 Parts for and Loading, Assembling and Packing |
SAE AMS 2636 : 2016
|
ULTRASONIC IMMERSION INSPECTION TITANIUM AND TITANIUM ALLOY FORGINGS PREMIUM GRADE |
ASTM C 1331 : 2018 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
I.S. EN 14165:2004
|
SPACE ENGINEERING STANDARDS - FRACTURE CONTROL |
NAS 412 : 1997
|
FOREIGN OBJECT DAMAGE (FOD) PREVENTION GUIDANCE DOCUMENT |
ASTM E 2024 : 2005
|
Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
ASTM E 1955 : 2004 : R2014
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs |
ASTM E 569/E569M : 2013 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
SAE AMS 2631 : 2017
|
ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
ASTM E 2104 : 2015 : REDLINE
|
Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
ASTM E 751/E751M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
ASTM E 1931 : 2016 : REDLINE
|
Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
BS ISO 24394 : 2008
|
WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLICCOMPONENTS |
ASTM E 1418 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM E 1359 : 2017 : REDLINE
|
Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
ASTM E 749/E749M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
ASTM E 2479 : 2016 : REDLINE
|
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves |
ASTM E 1496 : 2005
|
Standard Test Method for Neutron Radiographic Dimensional Measurements |
ASTM E 1210 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E 2373/E2373M : 2014 : REDLINE
|
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
ASTM E 543 : 2015 : REDLINE
|
Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1888/E1888M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
BS ISO 19828:2017
|
Welding for aerospace applications. Visual inspection of welds |
I.S. EN 4179:2017
|
AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING |
NACE TM 02 84 : 2016
|
EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
MIL-HDBK-115 Revision C:2016
|
U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
MIL-HDBK-1823 Revision A:2009
|
NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT |
SAE AS 6081 : 2012
|
FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
ASTM E 214 : 2005
|
Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007) |
MIL-STD-1537 Revision C:2002
|
Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
ASTM E 1220 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E 1118/E1118M : 2016 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM E 1817 : 2008 : R2014
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
SAE ARP 6178 : 2011
|
FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS |
ASTM E 797/E797M : 2015 : REDLINE
|
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
ASTM E 1030/E1030M : 2015 : REDLINE
|
Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 2985/E2985M : 2014
|
Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
ASTM E 1774 : 2017 : REDLINE
|
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 2981 : 2015
|
Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 493/E493M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 2096/E2096M : 2016 : REDLINE
|
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
ASTM E 1030 : 2005
|
Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1208 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM E 1209 : 2010
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
ASTM B 247 : 2015 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
ASTM E 2580 : 2017 : REDLINE
|
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 2662 : 2015 : REDLINE
|
Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 1742/E1742M : 2018 : REDLINE
|
Standard Practice for Radiographic Examination |
ASTM E 1033 : 2013 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
ASTM E 1219 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM E 1496 : 2005 : R2010
|
Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
ASTM E 2884 : 2017 : REDLINE
|
Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
ASTM E 1211/E1211M : 2017 : REDLINE
|
Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1161 : 2009 : R2014
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
DIN ISO 24394:2013-12
|
WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS (ISO 24394:2008 + AMD. 1:2013) |
BS EN 16603-32-01:2014
|
Space engineering. Fracture control |
MIL-HDBK-6870 Revision B:2012
|
NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
NASA SSTD 8070 0013 : 2015
|
CLASSES OF WELDING INSPECTION |
NASA MSFC RQMT 3479 : 2006
|
FRACTURE CONTROL REQUIREMENTS FOR COMPOSITE AND BONDED VEHICLE AND PAYLOAD STRUCTURES |
NASA PRC 0001 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE |
NASA PRC 6510 : 2011
|
PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF WELDS |
NASA STD 6016(INT) : 2006
|
STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
NASA PRC 6509 : 2011
|
PROCESS SPECIFICATION FOR EDDY CURRENT INSPECTION |
NASA PRC 6506 : 2011
|
PROCESS SPECIFICATION FOR LIQUID PENETRANT INSPECTION |
NASA PRC 6505 : 2011
|
PROCESS SPECIFICATION FOR MAGNETIC PARTICLE INSPECTION |
NASA PRC 0015 : 2016
|
PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF TITANIUM AND TITANIUM ALLOY HARDWARE |
MIL-HDBK-6870 Revision C:2020
|
NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
NASA KSC DE 512-SM : 2012
|
FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
NASA STD 5005 : 2013
|
STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
NASA STD 6016 : 2016
|
STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
NASA STD 5006 : 2015
|
GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS |
NASA PRC 0010 : 2012
|
PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE |
NASA PRC 0005 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE |
NASA PRC 6503 : 2011
|
PROCESS SPECIFICATION FOR RADIOGRAPHIC INSPECTION |
NASA PRC 0002 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF TITANIUM ALLOY HARDWARE |
NASA PRC 0014 : 2012
|
PROCESS SPECIFICATION FOR FRICTION STIR WELDING |
NASA JSC 27301 : 2009
|
MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
NASA GSFC STD 7000 : 2013
|
GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) FOR GSFC FLIGHT PROGRAMS AND PROJECTS |
MIL-DTL-2156 Revision D:2010
|
CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING |
UNI EN 4678 : 2012
|
AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
ASTM E 215 : 2016 : REDLINE
|
Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
NASA STD 5009 : 2008
|
NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND) |
ASTM E 114 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
ASTM E 1312 : 2009
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
AWS B5.4 : 2005
|
SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
ASTM E 587 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Angle-Beam Contact Testing |
ISO 19828:2017
|
Welding for aerospace applications — Visual inspection of welds |
ASTM E 1603/E1603M : 2011
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
AWS C7.3 : 2016
|
PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING |
ASTM E 3052 : 2016
|
Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
SAE AMS I 83387 : 2016
|
INSPECTION PROCESS, MAGNETIC RUBBER |
SAE AMS 2175 : 2010
|
CASTINGS, CLASSIFICATION AND INSPECTION OF |
ASTM E 1571 : 2011
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM E 493 : 2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
NASA STD 8719.9 : 2015
|
LIFTING STANDARD |
ASTM E 1417/E1417M : 2016 : REDLINE
|
Standard Practice for Liquid Penetrant Testing |
ASTM E 2033 : 2017 : REDLINE
|
Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
ASTM E 2076 : 2005
|
Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 1212 : 2017 : REDLINE
|
Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
ASTM E 1067/E1067M : 2018 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM E 1814 : 2014 : REDLINE
|
Standard Practice for Computed Tomographic (CT) Examination of Castings |
ASTM E 1930/E1930M : 2017 : REDLINE
|
Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
ASTM E 1001 : 2016 : REDLINE
|
Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 2338 : 2017 : REDLINE
|
Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
ASTM E 664/E664M : 2015 : REDLINE
|
Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
ASTM E 2375 : 2016 : REDLINE
|
Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM E 1736 : 2015 : REDLINE
|
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ASTM E 493/E493M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 1603 : 1999
|
Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
17/30337995 DC : DRAFT MAY 2017
|
BS ISO 24394 - WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS |
14/30302071 DC : 0
|
BS EN 4179 - AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING |
07/30141879 DC : 0
|
ISO 24394 - WELDING IN AEROSPACE - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - WELDING OF METALLIC COMPONENTS |
03/311008 DC : DRAFT JUNE 2003
|
EN 14165 - SPACE ENGINEERING STANDARDS - FRACTURE CONTROL |
16/30337634 DC : DRAFT APR 2016
|
BS ISO 19828 - WELDING FOR AEROSPACE APPLICATIONS - VISUAL INSPECTION OF WELDS |
02/709089 DC : DRAFT JULY 2002
|
PREN 4179 - AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING |
BS EN 14165:2004
|
Space engineering standards. Fracture control |
EN 4678:2011
|
Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments |
EN 14165:2004
|
Space engineering standards - Fracture control |
ISO 24394:2008
|
Welding for aerospace applications Qualification test for welders and welding operators Fusion welding of metallic components |
SAE AMS 2628 : 2013
|
ULTRASONIC IMMERSION INSPECTION, TITANIUM AND TITANIUM ALLOY BILLET, PREMIUM GRADE |
NASA STD 5009(INT) : 2006
|
NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE CRITICAL METALLIC COMPONENTS |
ASTM E 571 : 2012 : REDLINE
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
SAE AMS 2647F : 2017
|
FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE |
NASA MSFC SPEC 3679 : 2012
|
PROCESS SPECIFICATION - WELDING AEROSPACE HARDWARE |
ASTM F 629 : 2015 : REDLINE
|
Standard Practice for Radiography of Cast Metallic Surgical Implants |
ASTM E 1955 : 2004
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
ASTM E 2906/E2906M : 2013
|
Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
AWS D17.3/D17.3M : 2016
|
SPECIFICATION FOR FRICTION STIR WELDING OF ALUMINUM ALLOYS FOR AEROSPACE APPLICATIONS |
ASTM E 2930 : 2013
|
Standard Practice for Pressure Decay Leak Test Method |
SAE AMS A 22771 : 2018
|
ALUMINUM ALLOY FORGINGS, HEAT TREATED |
ASTM E 2076/E2076M : 2015 : REDLINE
|
Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 1161 : 2009
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
SAE AS 6171/5 : 2016
|
TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS |
ASTM E 1570 : 2011 : REDLINE
|
PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
ASTM E 2478 : 2011 : R2016
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 2905/E2905M : 2013 : REDLINE
|
PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS |
ASTM E 2982 : 2014
|
Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 1255 : 2016 : REDLINE
|
Standard Practice for Radioscopy |
ASTM E 494 : 2015 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Materials |
ASTM E 1118 : 2005
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM C 1332 : 2018 : REDLINE
|
Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
ASTM E 1139/E1139M : 2017 : REDLINE
|
Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 1606 : 2015 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
ASTM E 2478 : 2011
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
UNE-EN 4179:2017
|
Aerospace series - Qualification and approval of personnel for non-destructive testing |
I.S. EN 4678:2011
|
AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
13/30275166 DC : 0
|
BS EN ISO 18490 - NON-DESTRUCTIVE TESTING - EVALUATION OF VISION ACUITY OF NDT PERSONNEL |
DIN EN 14165:2005-02
|
SPACE ENGINEERING STANDARDS - FRACTURE CONTROL |
EN 16603-32-01:2014
|
Space engineering - Fracture control |
EN 4179:2017
|
Aerospace series - Qualification and approval of personnel for non-destructive testing |