NASA HDBK 6025 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GUIDELINES FOR THE SPECIFICATION AND CERTIFICATION OF TITANIUM ALLOYS FOR NASA FLIGHT APPLICATIONS
16-08-2024
24-04-2014
DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS AND DEFINITIONS
4. GENERAL
5. NONCONFORMING TI ALLOYS
6. MITIGATING THE PROCUREMENT OF NONCONFORMING TI ALLOYS
APPENDICES
A - Reference Documents and Military Specifications
B - Chronological History for Nonconforming Ti Alloy GIDEPs
C - Screening of Ti Alloy Parts for In-Process Projects at JPL
D - Example Suspect Material Certifications
E - Example of an Acceptable ('Clean') Certification Package
F - Raw Material Supplier Audit Checklist
G - Example Quality Clause Entitled 'Raw Material Traceability'
H - Mechanical Test Results in Material Certification versus
In-House Test Data for Ti-6Al-4V
Specifies guideline procedures and processes that will help mitigate the procurement of nonconforming wrought titanium (Ti) alloys for National Aeronautics and Space Administration (NASA) flight applications.
| DocumentType |
Handbook
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS6910B | Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS6925B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated |
| SAE AMST9047 | Titanium and Titanium Alloy, Bars (Rolled or Forged) and Reforging Stock, Aircraft Quality |
| SAE AMS6900B | Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| SAE AMS4915L | Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed |
| SAE AMS6932B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 4.0V Extra Low Interstitial Annealed |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS4989C | Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed |
| SAE AMS4918N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed |
| SAE AMS6921B | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged |
| SAE AMS T 9046 : 2002 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AMS4990C | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged |
| SAE AMS4919H | Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed |
| SAE AMS6905B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed |
| SAE AMS6940A | Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V Annealed |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| SAE AMS6907B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed |
| SAE AMS6915B | Titanium Alloy Bars, Forgings and Forging Stock 7.0Al - 4.0Mo Annealed |
| SAE AMS4917H | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated |
| SAE AMS6931C | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed |
| MMPDS 06 : 2011 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) - COMPLETE SET INCLUDES 9 CHAPTERS |
| SAE AS9100D | Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations |
| SAE AMS4965L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged |
| SAE AMS2750E | Pyrometry |
| SAE AMS4958D | Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished |
| SAE AMS6926B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged |
| SAE AMS6920C | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| SAE AMS4910R | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed |
| SAE AMS4907K | Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed |
| SAE AMS4926N | Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength |
| SAE AMS4957F | Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| SAE AMS4988C | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated |
| SAE AMSH81200D | Heat Treatment of Titanium and Titanium Alloys |
| SAE AMS4979H | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated |
| SAE AMS4978G | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed |
| SAE AMS4904C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged |
| SAE AMS4909K | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS6906B | Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged |
| NASA HDBK 8739.18 : 2008 | PROCEDURAL HANDBOOK FOR NASA PROGRAM AND PROJECT MANAGEMENT OF PROBLEMS, NONCONFORMANCES, AND ANOMALIES - MEASUREMENT SYSTEM IDENTIFICATION: METRIC |
| SAE AMS4903C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated |
| SAE AMS6930E | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged |
| SAE AMS4916K | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| SAE AMS4944L | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
| SAE AMS6936B | Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed |
| SAE AMS6935B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged |
| SAE AMS4967L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable |
| SAE AMS6901B | Titanium Alloy Bars, Forgings, and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.