NASA SSTD 8070 0126 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE
Superseded date
06-07-2023
Superseded by
Published date
01-01-2014
Sorry this product is not available in your region.
1.0 PURPOSE
2.0 APPLICABILITY
3.0 REFERENCED AND APPLICABLE DOCUMENTS
4.0 REQUIREMENTS
5.0 RECORDS AND FORMS
Appendix A - Acronyms, Abbreviations, and Definitions
Appendix B - Flared Tube and Straight Thread Boss Connections
Appendix C - Approved Double Ferrule Flareless Type (Swaglok)
Tube Fittings
Appendix D - Coned and Left Hand Threaded Tube & Tube Fittings
Appendix E - Coned and Left Hand Threaded Tube and Tube Fitting
Manufacturers
Specifies the design requirements and operating limits for tubing and tube fittings at Stennis Space Center for facility and special test equipment (STE).
| Committee |
PIPE
|
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy |
| NASA SSTD 8070 0044 : 2012 | STANDARD FOR CARBON STEEL PIPING SYSTEMS |
| NASA SSTD 8070 0047 : 2016 | STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z |
| NASA SSTD 8070 0127 : 2014 | STANDARD FOR 'H' STAINLESS STEEL PIPE |
| NASA SSTD 8070 0061 : 2011 | LOW PRESSURE & TEMPERATURE STAINLESS STEEL PIPE SYSTEMS 'C' |
| SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS4841B | Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification |
| ASTM A 632 : 2004 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
| SAE AS4875/1A | Fittings, Straight Thread Boss or Flanged 37° Flared, Fluid Connection |
| SAE AS758B | FITTINGS - INSTALLATION IN STRAIGHT THREADED BOSS |
| MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
| NASA MSFC STD 506 : 1988 | MATERIALS AND PROCESSES CONTROL |
| SAE AS930E | FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| SAE AS1098B | FITTING END, FLARED TUBE, FOR SEAL RING, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| SAE AIR310A | Fittings, Catalog of Flared, Flareless, Pipe Threaded, Port, Hose, and Other Type Tube Standard Connectors |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| SAE AS4395B | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS4842/1A | Fittings, 37° Flared to Pipe Threaded, Fluid Connection |
| ASME B31.3:2016 | PROCESS PIPING |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MS28774 Revision M:2009 | RETAINER, PACKING BACKUP, SINGLE TURN, POLYTETRAFLUOROETHYLENE |
| MS28777 Revision D:2009 | WASHER, FLAT AIRCRAFT HYDRAULIC BACKUP |
| SAE AS5179B | NUT, FITTING, PORT |
| CFR 49(PTS186-199) : 0 | TRANSPORTATION |
| NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 | SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM |
| SAE AMS5566M | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) High Pressure, Cold Drawn |
| MS28778 Revision C:1984 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS |
| NASA SSTD 8070 0091 : 2014 | SSC REQUIREMENTS FOR MATERIALS USED IN LOX/GOX SERVICE |
| SAE AS4330A | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| SAE AS1941A | FITTING END, STRAIGHT THREAD, HIGH PRESSURE, BOSS CONNECTION, DESIGN STANDARD |
| SAE AMS5567F | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| SAE AS8791C | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin |
| SAE AS33583 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| SAE AS5201 | FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
| SAE AS4842/2A | Fittings, Flareless to Pipe Threaded, Fluid Connection |
| SAE AS4842A | Fittings and Bosses, Pipe Threaded, Fluid Connection |
| SAE AS71051B | Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard |
| SAE AS1099C | FITTING END, BULKHEAD FLARED TUBE, FOR SEAL RING, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| SAE AS28778B | O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER |
| NASA SSTD 8070 0007 : 2013 | STANDARD FOR VARIANCE AND ALTERNATE STANDARD REQUESTS |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| SAE AS4875A | Fittings, Straight Threaded Boss or Flanged, Fluid Connection |
| ASME PV CODE 8 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF PRESSURE VESSELS (SET) |
| NASA SSTD 8070 0013 : 2015 | CLASSES OF WELDING INSPECTION |
| NASA SSTD 8070 0005 : 2016 | PREPARATION, REVIEW, APPROVAL, AND RELEASE OF SSC STANDARDS |
| SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| SAE AMST6845B | Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition |
| NASA MSFC STD 3535 : 2009 | STANDARD FOR PROPELLANTS AND PRESSURANTS USED FOR TEST AND TEST SUPPORT ACTIVITIES AT SSC AND MSFC |
| SAE AMS5556J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (347) Solution Heat Treated |
| SAE AMS5557J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AS4320 | FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.