NASA STD 6001 : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
Available format(s)
Hardcopy , PDF
Superseded date
05-08-2024
Superseded by
Language(s)
English
Published date
26-08-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS AND DEFINITIONS
4. EVALUATION AND TESTING OF MATERIALS
5. APPLICABLE MATERIAL TESTS
6. SYSTEM EVALUATIONS
7. TEST METHODS
APPENDIX
A - Supplemental Tests
B - Certification of Facilities
C - Reference Documents
D - Submitting Material for Testing
E - Requirements Compliance Matrix
Sets up National Aeronautics and Space Administration (NASA) program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, offgassing, and fluid compatibility.
| DevelopmentNote |
Supersedes EIA 364-89. (09/2006) Supersedes NASA STD 6001(INT). (10/2011)
|
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS EN 16602-70-21:2014 | Space product assurance. Flammability testing for the screening of space materials |
| MIL-STD-1411 Revision B:2010 | INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS |
| NASA SSTD 8070 0091 : 2014 | SSC REQUIREMENTS FOR MATERIALS USED IN LOX/GOX SERVICE |
| ASTM E 1549/E1549M : 2013 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| MIL-PRF-85045 Revision G:2014 | Cables, Fiber Optic, General Specification for |
| MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
| RR-C-901 Revision E:2010 | CYLINDERS, COMPRESSED GAS: SEAMLESS SHATTERPROOF, HIGH PRESSURE DOT 3AA STEEL, AND 3AL ALUMINUM |
| ASTM E 2352 : 2019 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations |
| ASTM E 2352 : 2004 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| NASA KSC NE 9187 : 2008 | SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS |
| NASA MSFC PROC 3687 : 2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| I.S. EN 14100:2002 | SPACE PRODUCT ASSURANCE - THE DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT |
| I.S. EN 14090:2002 | SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| NASA KSC KTI 5210 : 2012 | MATERIAL SELECTION LIST FOR OXYGEN SERVICE |
| I.S. EN 16602-70-29:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT |
| ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 2352 : 2004 : R2010 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 | SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA SPEC 5004A : 2003 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| NASA SSTD 8070 0126 : 2014 | TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
| NASA MSFC SPEC 164 : 2010 | CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| NASA STD 6016(INT) : 2006 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| NASA MSFC SPEC 3686 : A2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| NASA PRC 5001 : 2011 | PROCESS SPECIFICATION FOR CLEANING OF HARDWARE |
| NASA MSFC SPEC 494 : 2009 | INSTALLATION OF HARNESS ASSEMBLIES (ELECTRICAL WIRING), SPACE VEHICLE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| NASA SSTD 8070 0006 : 2014 | COMPONENT SERVICING PROCESSES AND DOCUMENTATION |
| NASA PRC 4005 : 2011 | PROCESS SPECIFICATION FOR FLAME RETARDANT TREATMENT OF FABRICS AND WEBBINGS |
| I.S. EN 16602-70:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES |
| ASTM D 7194 : 2012 : REDLINE | Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
| NASA PRC 9010 : 2005 | PROCESS SPECIFICATION FOR BAKING MATERIALS TO REDUCE TOXIC OFFGASSING |
| BS EN 14100:2001 | Space product assurance. The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| EN 14090:2002 | Space product assurance - Flammability testing for the screening of space materials |
| EN 16602-70-21:2014 | Space product assurance - Flammability testing for the screening of space materials |
| EN 14100:2001 | Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| SAE AS 6294/1 : 2017 | REQUIREMENTS FOR PLASTIC ENCAPSULATED MICROCIRCUITS IN SPACE APPLICATIONS |
| BS EN 16602-70:2016 | Space product assurance. Materials, mechanical parts and processes |
| I.S. EN 16602-70-21:2014 | SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS |
| BS EN 14090:2002 | Space product assurance. Flammability testing for the screening of space materials |
| EN 16602-70:2016 | Space product assurance - Materials, mechanical parts and processes |
| PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| SAE AS4373E | TEST METHODS FOR INSULATED ELECTRIC WIRE |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-PRF-26539 Revision G:2017 | PROPELLANTS, DINITROGEN TETROXIDE |
| ASTM D 3294 : 2015 : REDLINE | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
| MIL-STD-2223 Base Document:1992 | TEST METHODS FOR INSULATED ELECTRIC WIRE |
| ASTM G 72 : 2001 | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| MIL-PRF-27404 Revision D:2012 | PROPELLANT, MONOMETHYLHYDRAZINE |
| ASTM D 1310 : 2014 : REDLINE | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| MIL-PRF-26536 Revision G:2017 | PROPELLANT, HYDRAZINE |
| MIL-PRF-25604 Revision F:2014 | PROPELLANT, UNS-DIMETHYLHYDRAZINE |
| ISO 14624-1:2003 | Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials |
| NASA JSC 29353 : 2014 | FLAMMABILITY CONFIGURATION ANALYSIS FOR SPACECRAFT APPLICATIONS |
| ISO 14624-3:2005 | Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| ASTM G 86 : 1998 : REV A | Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments |
| ISO 14624-4:2003 | Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
| MIL-PRF-27402 Revision D:2014 | PROPELLANT, HYDRAZINE - UNS-DIMETHYLHYDRAZINE (50% N[2]H[4] - 50% UDMH) |
| ASTM D 240 : 2017 : REDLINE | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| ISO 14624-2:2003 | Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.