NBN EN ISO 13703 : 2001 COR 2007

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated
   terms
   3.1 Terms and definitions
   3.2 Symbols and abbreviated terms
4 General considerations
   4.1 Materials
   4.2 Code of pressure piping
   4.3 Demarcation between systems with different
        pressure ratings
   4.4 Corrosion considerations
5 Piping design
   5.1 Pipe design
   5.2 Sizing criteria - General
   5.3 Sizing methods for liquid lines
   5.4 Sizing criteria for single-phase gas lines
   5.5 Sizing criteria for gas/liquid two-phase lines
   5.6 Pipe wall thicknesses
   5.7 Joint connections
   5.8 Expansion and flexibility
   5.9 Start-up provisions
6 Selection of valves
   6.1 General
   6.2 Types of valves
   6.3 Fire resistance of valves
   6.4 Valve sizing
   6.5 Valve pressure and temperature ratings
   6.6 Valve materials
7 Fittings and flanges
   7.1 General
   7.2 Welded fittings
   7.3 Screwed fittings
   7.4 Branch connections
   7.5 Flanges
   7.6 Proprietary connectors
   7.7 Special requirements for sulfide stress-cracking
        service
   7.8 Erosion prevention
8 Design considerations for particular piping
   systems
   8.1 General
   8.2 Wellhead accessory items
   8.3 Flowline and flowline accessories
   8.4 Production manifolds
   8.5 Process vessel piping
   8.6 Utility systems
   8.7 Heating fluid and glycol systems
   8.8 Pressure relief and disposal systems
   8.9 Drain systems
   8.10 Bridge piping between platforms
   8.11 Risers
   8.12 Sampling valves
9 Considerations of related items
   9.1 General
   9.2 Layout
   9.3 Elevations
   9.4 Piping supports
   9.5 Other corrosion considerations
   9.6 Thermal insulation
   9.7 Noise
   9.8 Pipe, valves and fittings tables
   9.9 Inspection, maintenance, repair and modification
10 Installation and quality control
   10.1 General
   10.2 Welding
   10.3 Pressure testing
   10.4 Test record
Annex A (informative) Example problems
Annex B (informative) Examples of pipe, valves and
        fittings tables
Annex C (informative) Acceptable butt-welded joint
        design for unequal wall thicknesses
Bibliography

Provides minimum requirements and guidance for the design and installation of new piping systems on production platforms located offshore for the petroleum and natural gas industries. It covers piping systems up to 69000 kPa (gas) maximum, within temperature range limits for the materials meeting the requirements of ASME B31.3.