NEMA 107:2016
Current
The latest, up-to-date edition.
Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus
02-12-2016
Foreword
Scope
Section 1 - Referenced Standards and Definitions
Section 2 - General Test Conditions
Section 3 - Laboratory and Factory RIV Tests-0.015 To 30 Megahertz
Section 4 - Field Measurements of RIV-0.015 To 30
Section 5 - High-Voltage Test-Circuit Components
This Standard covers the methods of measurement of radio influence voltage in the frequency range of 0.015 to 30 megahertz that may be associated with high-voltage power apparatus used on transmission and distribution systems at line voltages of 0.6 kilovolts and above.
| DocumentType |
Standard
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Current
|
| CSA C60044-2 : 2007 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| IEEE C57.124 : 1991 | RECOMMENDED PRACTICE FOR THE DETECTION OF PARTIAL DISCHARGE AND THE MEASUREMENT OF APPARENT CHARGE IN DRY-TYPE TRANSFORMERS |
| ENA TS 43-99 : ISSUE 1 1997 | LIMITS AND MEASUREMENT OF RADIO NOISE FROM CAP AND PIN INSULATORS |
| CSA C60044-2 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| CSA C13.1 : M79(R2004) | CAPACITOR VOLTAGE TRANSFORMERS |
| IEEE C57.13.5-2009 | IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| ANSI C29.11 : 2012 | COMPOSITE SUSPENSION INSULATORS FOR OVERHEARD TRANSMISSION LINES - TESTS |
| ANSI C29.12 : 2013 | FOR COMPOSITE INSULATORS-TRANSMISSION SUSPENSION TYPE |
| PD CISPR/TR 18-2:2017 | Radio interference characteristics of overhead power lines and high-voltage equipment Part 2: Methods of measurement and procedure for determining limits |
| ANSI/NEMA C93.1-1999 | American National Standard for Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs) |
| CISPR TR 18-2:2017 | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits |
| IEEE PC57.19.00/D4:2022 | IEEE Draft Standard General Requirements and Test Procedure for Power Apparatus Bushings |
| NEMA SG 6:2000 | POWER SWITCHING EQUIPMENT |
| NEMA SG 4:2009(R2013) | ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS |
| IEEE 1247 : 2005 | INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V |
| IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
| CSA C88.1 : 1996 : R2005 | POWER TRANSFORMERS AND REACTOR BUSHINGS |
| CSA C88.1 : 1996 : R2011 | POWER TRANSFORMERS AND REACTOR BUSHINGS |
| IEEE 1277-2010 | IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission |
| IEEE C37.32-2002 | American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings, Construction Guidelines, and Specifications |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| CSA C88.1 : 1996 : R2015 | POWER TRANSFORMERS AND REACTOR BUSHINGS |
| IEEE C37.12-2008 REDLINE | IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts) |
| IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
| IEEE C37.66 : 2005 | REQUIREMENTS FOR CAPACITOR SWITCHES FOR AC SYSTEMS (1 KV TO 38 KV) |
| IEEE 539-2005 | IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines |
| IEEE C37.34-1994 | IEEE Standard Test Code for High-Voltage Air Switches |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.