NEMA TS 3.5 : 1997

Foreword
Section 1 General
         1.1 SCOPE
         1.2 REFERENCES
         1.2.1 Normative References
         1.2.2 Other References
         1.3 ACTUATED CONTROLLER UNIT TERMS
         1.4 ABBREVIATIONS AND ACRONYMS
Section 2 OBJECT DEFINITIONS
         2.1 MIB HEADER
         2.2 PHASE PARAMETERS
         2.2.1 Maximum Phases
         2.2.2 Phase Table
         2.2.2.1 Phase Number
         2.2.2.2 Phase Walk Parameter
         2.2.2.3 Phase Pedestrian Clear Parameter
         2.2.2.4 Phase Minimum Green Parameter
         2.2.2.5 Phase Passage Parameter
         2.2.2.6 Phase Maximum Green 1 Parameter
         2.2.2.7 Phase Maximum Green 2 Parameter
         2.2.2.8 Phase Yellow Change Parameter
         2.2.2.9 Phase Red Clear Parameter
         2.2.2.10 Phase Red Revert
         2.2.2.11 Phase Added Initial Parameter
         2.2.2.12 Phase Maximum Initial Parameter
         2.2.2.13 Phase Time Before Reduction Parameter
         2.2.2.14 Phase Cars Before Reduction Parameter
         2.2.2.15 Phase Time To Reduce Parameter
         2.2.2.16 Phase Reduce By
         2.2.2.17 Phase Minimum Gap Parameter
         2.2.2.18 Phase Dynamic Max Limit
         2.2.2.19 Phase Dynamic Max Step
         2.2.2.20 Phase Startup
         2.2.2.21 Phase Options
         2.2.2.22 Phase Ring Parameter
         2.2.2.23 Phase Concurrency
         2.2.3 Maximum Phase Groups
         2.2.4 Phase Status Group Table
         2.2.4.1 Phase Status Group Number
         2.2.4.2 Phase Status Group Reds
         2.2.4.3 Phase Status Group Yellows
         2.2.4.4 Phase Status Group Greens
         2.2.4.5 Phase Status Group Dont Walks
         2.2.4.6 Phase Status Group Pedestrian clears
         2.2.4.7 Phase Status Group Walks
         2.2.4.8 Phase Status Group Vehicle Calls
         2.2.4.9 Phase Status Group Pedestrian Calls
         2.2.4.10 Phase Status Group Phase Ons
         2.2.4.11 Phase Status Group Phase Nexts
         2.2.5 Phase Control Table
         2.3 DETECTOR PARAMETERS
         2.3.1 Maximum Vehicle Detectors
         2.3.2 Vehicle Detector Parameter Table
         2.3.3 Maximum Vehicle Detector Status Groups
         2.3.4 Vehicle Detector Status Group Table
         2.3.5 Volume / Occupancy report
         2.3.6 Maximum Pedestrian Detectors
         2.3.7 Pedestrian Detector Parameter Table
         2.3.7.4 Pedestrian Detector Maximum Presence Parameter
         2.4 UNIT PARAMETERS
         2.4.1 StartUp Flash Parameter
         2.4.2 Automatic Ped Clear Parameter
         2.4.3 Backup Time Parameter
         2.4.4 Unit Red Revert Parameter
         2.4.5 Unit Control Status
         2.4.6 Unit Flash Status
         2.4.7 Unit Alarm Status 2
         2.4.8 Unit Alarm Status 1
         2.4.9 Short Alarm Status
         2.4.10 Unit Control
         2.4.11 Maximum Alarm Groups
         2.4.12 Alarm Group Table
         2.5 COORDINATION PARAMETERS
         2.5.1 Coord Operational Mode Parameter
         2.5.2 Coord Correction Mode Parameters
         2.5.3 Coord Maximum Mode Parameters
         2.5.4 Coord Force Mode Parameters
         2.5.5 Maximum Patterns Parameters
         2.5.6 Pattern Table Type
         2.5.7 Pattern Table
         2.5.8 Maximum Splits
         2.5.9 Split Table
         2.5.10 Coordination Pattern Status
         2.5.11 Local Free Status
         2.5.12 Coordination Cycle Status
         2.5.13 Coordination Sync Status
         2.5.14 System Pattern Control
         2.5.15 System Sync Control
         2.6 TIME BASE PARAMETERS
         2.6.1 Time Base Pattern Sync Parameter
         2.6.2 Maximum Time Base Actions
         2.6.3 Time Base ASC Action Table
         2.6.4 Time Base ASC Action Status
         2.7 PREEMPT PARAMETERS
         2.7.1 Maximum Preempts
         2.7.2 Preempt Table
         2.7.3 Preempt Control Table
         2.8 RING PARAMETERS
         2.8.1 Maximum Rings
         2.8.2 Maximum Sequences
         2.8.3 Sequence Table
         2.8.4 Maximum Ring Control Groups
         2.8.5 Ring Control Group Table
         2.9 CHANNEL PARAMETERS
         2.9.1 Maximum Channels
         2.9.2 Channel Table
         2.9.3 Maximum Channel Status Groups
         2.9.4 Channel Status Group Table
         2.10 OVERLAP PARAMETERS
         2.10.1 Maximum Overlaps
         2.10.2 Overlap Table
         2.10.3 Maximum Overlap Status Groups
         2.10.4 Overlap Status Group Table
         2.11 TS2 PORT 1 PARAMETERS
         2.11.1 Maximum Port 1 Addresses
         2.11.2 Port 1 Table
Section 3 Group Definitions
         3.1 PHASE CONFORMANCE GROUP
         3.2 DETECTOR CONFORMANCE GROUP
         3.3 VOLUME OCCUPANCY REPORT CONFORMANCE GROUP
         3.4 UNIT CONFORMANCE GROUP
         3.5 SPECIAL FUNCTION CONFORMANCE GROUP
         3.6 COORDINATION CONFORMANCE GROUP
         3.7 TIME BASE CONFORMANCE GROUP
         3.8 PREEMPT CONFORMANCE GROUP
         3.9 RING CONFORMANCE GROUP
         3.10 CHANNEL CONFORMANCE GROUP
         3.11 OVERLAP CONFORMANCE GROUP
         3.12 TS-2 PORT 1 CONFORMANCE GROUP
Section 4 CONFORMANCE STATEMENTS

Covers objects which are specific to actuated signal controllers. Also defines standardized object groups which can be used for conformance statements.