NF EN 10025-4 : 2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
06-10-2021
12-01-2013
Avant-propos
1 Domaine d'application
2 Références normatives
2.1 Normes générales
2.2 Normes concernant les dimensions et tolérances
2.3 Normes d'essais
3 Termes et définitions
4 Classification et désignation
4.1 Classification
4.2 Désignation
5 Informations à fournir par l'acheteur
5.1 Informations obligatoires
5.2 Options
6 Procédé de fabrication
6.1 Procédé d'élaboration de l'acier
6.2 Structure de grain
6.3 État de livraison
7 Exigences
7.1 Généralités
7.2 Composition chimique
7.3 Caractéristiques mécaniques
7.4 Caractéristiques technologiques
7.5 État de surface
7.6 Défauts internes
7.7 Dimensions, tolérances sur les dimensions et la forme,
masse
8 Controle
8.1 Généralités
8.2 Type de controle et de document de controle
8.3 Fréquence d'essai
8.4 Essais à effectuer pour le controle spécifique
9 Préparation des échantillons et éprouvettes
9.1 Choix et préparation des échantillons pour essais
chimiques
9.2 Emplacement et orientation des échantillons et des
éprouvettes pour essais mécaniques
9.3 Identification des échantillons et des éprouvettes
10 Méthodes d'essais
10.1 Analyse chimique
10.2 Essais mécaniques
10.3 Controle ultrasonore
10.4 Contre-essais
11 Marquage, étiquetage, emballage
12 Réclamations
13 Options
Annexe A (informative) Liste des anciennes désignations
correspondantes
Annexe B (informative) Liste des normes nationales correspondant
aux EURONORM de référence
Bibliographie
Specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities.
| DevelopmentNote |
Indice de classement: A35-501-4PR. Supersedes NF EN 10113-1 and NF EN 10113-3. (05/2005) PR NF EN 10025-4 May 2011. (05/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| BS EN 10025-4:2004 | Identical |
| EN 10025-4:2004 | Identical |
| I.S. EN 10025-4:2004 | Identical |
| NBN EN 10025-4 : 2005 | Identical |
| NS EN 10025-4 : 1ED 2005 | Identical |
| ONORM EN 10025-4 : 2005 | Identical |
| UNI EN 10025-4 : 2005 | Identical |
| DIN EN 10025-4:2011-04 (Draft) | Identical |
| SN EN 10025-4 : 2005 | Identical |
| NEN EN 10025-4 : 2004 | Identical |
| UNE-EN 10025-4:2007 | Identical |
| DIN EN 10025-4:2005-02 | Identical |
| NFA 35 503 : 2008 | IRON AND STEEL - REQUIREMENTS ON HOT DIP ZINC COATING OF STEEL COMPONENTS |
| NFP 98 286 : 2006 | TEST RELATING TO PAVEMENTS - WATERPROOFING MATERIALS FOR ENGINEERING STRUCTURES - DETERMINATION OF THE FATIGUE STRENGTH OF A WATERPROOFING SURFACE COURSE ON SHEET METAL - NEGATIVE BENDING MOMENT FATIGUE BENCH TEST METHOD |
| NF EN 1993 1-8 : 2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| NF P 23 311 : 2013 | PORTES ET BLOCS PORTES INTERIEURES EN BOIS - SPECIFICATIONS TECHNIQUES |
| NF EN 1993 1-1 : 2005 AMD 1 2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| XP P98 550-1 : 2008 XP | OVERHEAD ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - PART 1: CALCULATION, SPECIFICATIONS, IMPLEMENTATION, CONTROL, MAINTENANCE, SURVEILLANCE |
| NF EN 10056-1 : 2017 | STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
| NF EN 10306 : 2002 | IRON AND STEEL - ULTRASONIC TESTING OF H BEAMS WITH PARALLEL FLANGES AND IPE BEAMS |
| NF EN 10163-2 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 2: PLATES AND WIDE FLATS |
| NF EN 10017 : 2005 | STEEL ROD FOR DRAWING AND/OR COLD ROLLING - DIMENSIONS AND TOLERANCES |
| NF EN 10308 : 2002 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING OF STEEL BARS |
| NF EN 10056-2 : 1994 | STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10067 : 1996 | HOT-ROLLED BULB FLATS - DIMENSIONS AND TOLERANCES ON SHAPE, DIMENSIONS AND MASS |
| NF EN 10163-3 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 3: SECTIONS |
| NF EN 10055 : 1996 | HOT ROLLED STEEL EQUAL FLANGE TEES WITH RADIUSED ROOT AND TOES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10034 : 1993 | STRUCTURAL STEEL I AND H SECTIONS - TOLERANCES ON SHAPE AND DIMENSION |
| NF EN 10025-1 : 2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| NF EN 10160 : 1999 | ULTRASONIC TESTING OF STEEL FLAT PRODUCT OF THICKNESS EQUAL OR GREATER THAN 6 MM (REFLEXION METHOD) |
| NF EN 10058 : 2004 | HOT ROLLED FLAT STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10051 : 2011 | HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| NF EN 10162 : 2003 | COLD ROLLED STEEL SECTIONS - TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL AND CROSS-SECTIONAL TOLERANCES |
| NF CR 10260 : 98 FD | DESIGNATION SYSTEM FOR STEEL - ADDITIONAL SYMBOLS |
| NF EN ISO 643 : 2013 | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE |
| NF EN 10060 : 2004 | HOT ROLLED ROUND STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10164 : 2005 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| NF EN 10048 : 1996 | HOT ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| NF EN 10061 : 2004 | HOT ROLLED HEXAGON STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10027-2 : 2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| NF EN 10221 : 1996 | SURFACE QUALITY CLASSES FOR HOT-ROLLED BARS AND RODS - TECHNICAL DELIVERY CONDITIONS |
| NF EN 1011-2 : 2002 AMD 1 2004 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEEL |
| NF EN 10029 : 2011 | HOT ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS, SHAPE AND MASS |
| NF EN 10024 : 1995 | HOT ROLLED TAPER FLANGE I SECTIONS - TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10059 : 2004 | HOT ROLLED SQUARE STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| NF EN 10279 : 2000 | HOT ROLLED STEEL CHANNELS - TOLERANCES ON SHAPE, DIMENSIONS AND MASS |
| NF EN 10020 : 2000 | DEFINITION AND CLASSIFICATION OF GRADES OF STEEL |
| NF EN 10027-1 : 2017 | DESIGNATION SYSTEMS FOR STEEL - PART 1: STEEL NAMES |
| NF EN 10163-1 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITIONS OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.