NF EN 10045-1 : 1990

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD

Available format(s):

Superseded date: 01-01-2011

Language(s):

Published date: 12-01-2013

Publisher: Association Francaise de Normalisation

Table of Contents - (Show below) - (Hide below)

National foreword
Brief history
1. Object and field of application
2. References
3. Principle
4. Designations
5. Test pieces
6. Testing machine
7. Test requirements
8. Test report
Annex
A. List of national standards corresponding to the
reference European Standard in preparation
National appendix A
National appendix B
Cooperating organizations

Abstract - (Show below) - (Hide below)

Explains the Charpy impact test for metallic materials. For certain particular metallic materials and applications, the Charpy impact test may be the subject of specific standards and particular requirements. Covers references, principle, designations, test pieces, testing machine, test requirements and test report.

General Product Information - (Show below) - (Hide below)

Development Note	INDICE DE CLASSEMENT: A03011 Supersedes AIR 0814 (06/2002)
Document Type	Standard
ISBN
Pages
Published
Publisher	Association Francaise de Normalisation
Status	Superseded
Supersedes	NFA 03 156 : 1978 AIR 0814 : 1976 NFA 03 161 : 1978

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN 10045-1:1991	Identical
DIN EN 10045-1:1991-04	Identical
EN 10045-1 : 1990	Identical
BS EN 10045-1:1990	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

NF EN 10217-6 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
NF EN ISO 3471 : 2008	EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
NF EN 1993 1-10 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
NF EN 14399-7 : 2008	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
XP A35 014 : 2003 XP	REINFORCING STEELS - PLAIN, INDENTED OR RIBBED STAINLESS STEEL BARS AND COILS
NF EN 10217-5 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
NF EN 12693 : 2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
NF EN 334 : 2005 + A1 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
NF EN 14382 : 2005 + A1 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
NF EN 10250-1 : 1999	OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS
NF EN 14399-10 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
NFA 33 200 : 95 XP	IRON AND STEEL - MARAGING STEEL FOR FORGING INTENDED FOR THE MANUFACTURE OF FENCING BLADES
NF EN 10217-1 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
NF EN 10088-4 : 2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF EN 13155 : 2003 + A2 2009	CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
NF EN 13411-7 : 2006 + A1 2008	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
NF ISO 2330 : 2008	FORK-LIFT TRUCKS - FORK ARMS - TECHNICAL CHARACTERISTICS AND TESTING
NF CEN/TS 13001-3-1 : 2005 XP	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
NF EN 14399-8 : 2008	HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
NF EN 10217-4 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
NF ISO 8083 : 2006	MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
NF EN 10217-2 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
NFS 94 090 : 2005	MEDICO-SURGICAL EQUIPMENT - MATERIALS FOR ANCILLARY POSITIONING INSTRUMENTS FOR BONE SURGERY - MARTENSITIC, PRECIPITATION HARDENING, AUSTENITIC AND AUSTENO-FERRITIC STAINLESS STEELS
NFE 29 204 : 2008	INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS
NFA 32 058 : 2008	FOUNDRY PRODUCTS - ABRASION RESISTANT CAST STEELS
XP A49 342 : 97 XP	STEEL TUBES - WELDED STEEL TUBES WITH IMPROVED MACHINABILITY FOR MECHANICAL MACHINED PARTS - DIMENSIONS - TECHNICAL DELIVERY REQUIREMENTS
NF EN 10217-3 : 2002 AMD 1 2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
NFA 35 555 : 95 FD	IRON AND STEEL - STRUCTURAL STEEL BARS DELIVERED IN THE QUENCHED AND TEMPERED CONDITION
NF EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart