NF EN 1090-3 : 2009
Current
Current
The latest, up-to-date edition.
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Cahier des charges et dossier
5 Produits constitutifs
6 Préparation
7 Soudage
8 Fixations mécaniques et assemblage par collage
9 Montage
10 Traitement de surface
11 Tolérances géométriques
12 Controles, essais et réparations
Annexe A (normative) Informations supplémentaires
requises, options devant être spécifiées
et exigences relatives aux classes d'exécution
Annexe B (informative) Liste de controle du contenu
d'un plan qualité
Annexe C (normative) Essai de soudage en croix
Annexe D (normative) Procédure de détermination du
coefficient de frottement
Annexe E (informative) Fixation des profilés et des plaques
nervurées formés à froid
Annexe F (informative) Traitement de surface
Annexe G (normative) Tolérances géométriques - Tolérances
essentielles
Annexe H (normative) Tolérance géométriques - Tolérances
fonctionnelles
Annexe I (normative) Tolérances géométriques - Coques
Annexe J (informative) Désignation des exigences relatives
aux soudures sur les dessins
Annexe K (informative) Recommandations pour un descriptif
des conditions de chantier et de montage d'un
cahier des charges d'exécution
Annexe L (informative) Guide pour la préparation de la
spécification d'exécution relative aux exigences
de qualité des soudures
Annexe M (informative) Guide pour la spécification des
exigences de qualité relatives aux éléments et
structures en SC2
Annexe N (informative) Diagramme pour l'élaboration et
l'utilisation d'un descriptif de mode opératoire
de soudage (DMOS)
Bibliographie
La présente Norme européenne spécifie les exigences relatives à l'exécution des structures et éléments de structure en aluminium fabriqués à partir de: plaques, bandes et toles épaisses laminées, produits filés, barres et tubes étirés à froid, pièces forgées, pièces moulées. La présente Norme européenne spécifie des exigences indépendamment du type et de la forme de la structure en aluminium, et la présente Norme européenne est applicable aux structures soumises à des charges essentiellement statiques ainsi qu'aux structures soumises à la fatigue.
| DevelopmentNote |
Indice de classement: P22-101-3PR. PR NF EN 1090-3 September 2005. (09/2005) Supersedes NFP 22 202-1. (04/2009) PR NF EN 1090-3 April 2017. (05/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 1090-3:2008 | Identical |
| EN 1090-3:2019 | Identical |
| NF EN 1999-1-3 : 2007 AMD 1 2012 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| NF EN 1999-1-1 : 2007 AMD 2 2014 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| NF EN 1999-1-5 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| NF EN 586-1 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN ISO 9606-2 : 2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| NF EN 1418 : 1998 | WELDING PERSONNEL - APPROVAL TESTING OF WELDING OPERATORS FOR FUSION WELDING AND RESISTANCE WELD SETTERS FOR FULLY MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS |
| NF EN 755-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1999-1-3 : 2007 AMD 1 2012 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| NF EN 755-9 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 15613 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
| NF EN 755-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN ISO 15480 : 1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| NF EN ISO 4032 : 2013 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B |
| NF EN 573-2 : 1994 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 2: CHEMICAL SYMBOL BASED DESIGNATION SYSTEM |
| NF EN 1301-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 3: TOLERANCES ON DIMENSIONS |
| NF EN ISO 7089 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
| NF EN ISO 7093-1 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| NF EN ISO 2009 : 2011 | SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A |
| NF EN ISO 17659 : 2004 | WELDING - MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS |
| NF EN 754-7 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 15614-2 : 2005 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TESTS - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| NF EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN ISO 7049 : 2011 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| NF EN 28839 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS |
| NF EN 1999-1-2 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
| NF EN 754-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 473 : 2008 | NON DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| NF EN ISO 3834-2 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| NF EN ISO 4063 : 2011 | WELDING AND ALLIED PROCESSES - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS |
| NF EN ISO 9018 : 2015 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS |
| NF EN ISO 15481 : 1999 | CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| NF EN ISO 6520-1 : 2007 | WELDING AND ALLIED PROCESSES - CLASSIFICATION OF GEOMETRIC IMPERFECTIONS IN METALLIC MATERIALS - PART 1: FUSION WELDING |
| ISO 17123-7:2005 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments |
| ISO 10509:2012 | Hexagon flange head tapping screws |
| NF EN ISO 3834-4 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| NF EN ISO 1479 : 2011 | HEXAGON HEAD TAPPING SCREWS |
| NF EN ISO 4762 : 2004 | HEXAGON SOCKET HEAD CAP SCREWS |
| NF EN 754-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 10042 : 2006 | WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS |
| NF EN 754-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
| ISO 7976-2:1989 | Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points |
| NF EN 14399-8 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| NF EN ISO 4034 : 2013 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C |
| NF EN 20898-2 : 1994 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD |
| NF EN 755-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 485-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN ISO 4017 : 2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B |
| NF EN ISO 7093-2 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| NF EN ISO 6789 : 2003 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND RECALIBRATION PROCEDURE |
| NF EN ISO 7094 : 2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| NF EN 14399-3 : 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| NF EN ISO 18273 : 2016 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION |
| ISO 17123-3:2001 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 3: Theodolites |
| NF EN 1320 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - FRACTURE TEST |
| NF EN ISO 14731 : 2007 | WELDING COORDINATION - TASKS AND RESPONSIBILITIES |
| NF EN ISO 15609-1 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| NF EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| NF EN 10204 : 2005 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| NF EN 1337-3 : 2005 | STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| NF EN 1301-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN ISO 7090 : 2000 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A |
| NF EN 515 : 2017 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS - TEMPER DESIGNATIONS |
| NF EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| NF EN 754-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 3834-3 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS |
| NF EN ISO 4016 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| NF EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| NF EN 1714 : 97 AMD 2 2004 | NON DESTRUCTIVE EXAMINATION OF WELDS - ULTRASONIC EXAMINATION OF WELDED JOINTS |
| NF EN 573-3 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| ISO 4463-1:1989 | Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria |
| NF EN 1435 : 97 AMD 2 2004 | NON-DESTRUCTIVE EXAMINATION OF WELDS - RADIOGRAPHIC EXAMINATION OF WELDED JOINTS |
| NF EN 485-3 : 2003 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 3: TOLERANCES ON DIMENSIONS AND FORM FOR HOT-ROLLED PRODUCTS |
| NF EN 15088 : 2006 | ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 755-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1999-1-1 : 2007 AMD 2 2014 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| NF EN 755-7 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 13920 : 1996 | WELDING - GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS - DIMENSIONS FOR LENGTHS AND ANGLES - SHAPE AND POSITION |
| NF EN 1999-1-5 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| NF EN 14399-4 : 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| NF EN ISO 9013 : 2017 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| NF EN 19970 : 1997 | NON-DESTRUCTIVE EXAMINATION OF FUSION WELDS - VISUAL EXAMINATION |
| NF EN 755-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 14399-7 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| NF EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| NF EN 485-4 : 1994 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 4: TOLERANCES ON SHAPE AND DIMENSIONS FOR COLD-ROLLED PRODUCTS |
| NF EN 14399-5 : 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 5: PLAIN WASHERS |
| NF EN 755-8 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1337-5 : 2005 | STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
| NF EN 1011-4 : 2000 AMD 1 2004 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| NF EN 754-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
| ISO 7976-1:1989 | Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments |
| NF EN 1321 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS |
| NF EN 12020-2 : 2017 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 754-8 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1011-1 : 2009 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
| NF EN 1337-4 : 2004 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| NF EN 573-1 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 1: NUMERICAL DESIGNATION SYSTEM |
| NF EN ISO 1481 : 2011 | SLOTTED PAN HEAD TAPPING SCREWS |
| NF EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| NF EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| ISO 17123-4:2012 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
| NF EN 12206-1 : 2011 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| NF EN 571-1 : 1997 | NON DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES |
| ISO 17123-1:2014 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory |
| NF EN 586-3 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 3: TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 4018 : 2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| NF EN 14399-2 : 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING |
| NF EN ISO 15612 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NF EN 1337-6 : 2005 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| NF EN 14399-6 : 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 6: PLAIN CHAMFERED WASHERS |
| NF EN ISO 7091 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| NF EN ISO 4288 : 1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.