NF EN 12158-2 : 2001 + A1 2010
Current
The latest, up-to-date edition.
BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux
5 Prescriptions et/ou mesures de sécurité
6 Vérification
7 Informations destinées à l'utilisateur
Annexe A (normative) Carte européenne des tempêtes
et vents
Annexe B (informative) Index détaillé de la présente
norme
Annexe ZA (informative) Articles de la présente Norme
Européenne concernant les
exigences essentielles ou
d'autres dispositions des
Directives UE
Bibliographie
Intended for use by persons who are permitted to enter sites of engineering and construction, this standard describes power operated temporarily installed builders hoists, serving either one upper landing or a work area extending to the end of the guides, (e.g a roof) having a load carrying device (lcd): which is intended for the transportation of goods only; where it is forbidden for persons to step upon it at any time; which is guided; is sustained by steel wire rope and a positive drive syste system; controlled by hold-to-run controls by the operator; does not benefit from the use of any counterweight; has a maximum rated load of 300 kg; is designed to travel at an angle of at least 30 degrees to the vertical but may be used at any angle between the vertical and maximum inclination as specified by manufacturer.
| DevelopmentNote |
Indice de classement: E52-605-2. (09/2002) 2001 Edition Re-issued in September 2010 & incorporates AMD 1 2010. (09/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 12158-2:2000 | Identical |
| NBN EN 12158-2 : 2001 + A1 2010 | Identical |
| NEN EN 12158-2 : 2000 + A1 2010 | Identical |
| NS EN 12158-2 : 2000 + A1 2010 | Identical |
| EN 12158-2:2000+A1:2010 | Identical |
| BS EN 12158-2 : 2000 | Identical |
| DIN EN 12158-2:2011-04 | Identical |
| UNE-EN 12158-2:2001 | Identical |
| NFE 52 600 : 2016 | BUILDING HOISTS - TERMINOLOGY |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4302:2016 | Cranes — Wind load assessment |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| HD 22-1 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOSETTING INSULATION - GENERAL REQUIREMENTS |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 4309:2010 | Cranes — Wire ropes — Care and maintenance, inspection and discard |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |