NF EN 14800 : 2007
Current
The latest, up-to-date edition.
CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Construction requirements
4.1 General
4.2 Nominal size
4.3 Materials
4.4 Requirements for the connection between
hose and fittings
4.5 End fittings design requirements
4.6 CMG hose assembly lengths
4.7 Corrosion requirements
4.8 Insulation requirements
4.9 Electric conductivity requirements
4.10 Hygiene
4.11 Cover materials
4.12 Dangerous substances
5 Performance requirements and tests
5.1 General
5.2 Test sequence schedule
5.3 Leak-tightness
5.3.1 Requirements
5.3.2 Test procedure
5.4 Structural strength
5.4.1 Requirements
5.4.2 Test procedure
5.5 Flow rate
5.5.1 Requirements
5.5.2 Test procedure
5.5.3 Conversion of air flow rate
5.6 Electric continuity
5.6.1 Requirements
5.6.2 Test procedure
5.7 Tension
5.7.1 Requirements
5.7.2 Test procedure
5.8 Durability of marking
5.8.1 Requirements
5.8.2 Test procedure
5.9 Working temperature
5.9.1 Requirements
5.9.2 Test procedure
5.10 Corrosion resistance
5.10.1 Requirements
5.10.2 Test procedure
5.11 Reaction to fire
5.11.1 Requirements
5.11.2 Testing and assessment methods
5.12 Resistance to high temperature
5.12.1 Requirements
5.12.2 Test procedure
5.13 Suppleness
5.13.1 Requirements
5.13.2 Test procedure
5.14 Bending performance
5.14.1 Bending performance for type 1 hoses with
non-restricted bend radius
5.14.2 Bending performance for type 2 hoses having
a restricted bend radius
5.15 Flexing resistance
5.15.1 Requirements
5.15.2 Test procedure
5.16 Torsion resistance
5.16.1 Requirements
5.16.2 Test procedure
5.17 Impact/crushing resistance
5.17.1 Requirements
5.17.2 Test procedure
5.18 Penetration resistance
5.18.1 Requirements
5.18.2 Test method
5.19 End fittings
5.19.1 Requirements
5.19.2 Test procedures
5.19.3 End fittings bodies manufactured from
more than one part
6 Evaluation of conformity
6.1 General
6.2 Type testing
6.2.1 Initial type testing
6.2.2 Subsequent type testing
6.3 Factory production control (FPC)
6.3.1 General
6.3.2 FPC requirements for all manufacturers
6.3.3 Manufacturer-specific FPC system requirements
6.4 Installation instruction
6.5 Packaging
Annex A (informative) - Hose fitting design requirements
for connection to the gas supply pipework, to the
pressure reduction device of portable gas bottles
or to domestic appliance
Annex B (normative) - Thermal attack by a single burning
item
B.1 General
B.2 Scope
B.3 Standardized mounting and fixing
Annex C (normative) - Single-flame source test
C.1 General
C.2 Scope
C.3 Standardized mounting and fixing
C.4 Test definition
C.5 Test duration
Annex ZA (informative) - Clauses of this EN addressing
the provisions of EU Construction Products
Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity
of corrugated safety metal hose assemblies
ZA.3 CE Marking and labelling
Bibliography
Describes the requirements of performance, the material and the test methods of corrugated safety metal gas hose assemblies for the connection of domestic appliances, in order to achieve save operation.
DevelopmentNote |
Indice de classement: D36-130. PR NF EN 14800 January 2004. (01/2004)
|
DocumentType |
Standard
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Current
|
Standards | Relationship |
DIN EN 14800:2007-06 | Identical |
BS EN 14800:2007 | Identical |
UNI EN 14800 : 2007 | Identical |
EN 14800:2007 | Identical |
NFD 36 134 : 2017 | UNREMOVABLE JOINTS - VALVES WITH INTEGRATED AUTOMATIC OBTURATOR (ROAI)/CORRUGATED METALLIC FLEXIBLE PIPING |
NFD 36 125 : 2009 AMD 1 2011 | HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING BUTANE AND PROPANE FROM CYLINDERS |
NFD 36 135 : 2017 | UNREMOVABLE JOINTS - CORRUGATED METALLIC FLEXIBLE PIPING/INTEGRATED ROTARY JUNCTION |
NFD 36 121 : 2009 AMD 1 2011 | HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS DISTRIBUTED BY NETWORKS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.