• NF EN 50377-11-1 : 2008

    Current The latest, up-to-date edition.

    CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Domaine d'application
      1.1 Définition du produit
      1.2 Compatibilité d'accouplement
      1.3 Environnement de fonctionnement
      1.4 Fiabilité
      1.5 Assurance de la qualité
    2 Références normatives
    Tableau 1 - Niveau assuré de dispersion d'affaiblissement
    3 Description
      3.1 Fiche
      3.2 Boîtiers
      3.3 Matériaux
      3.4 Dimensions
      3.5 Couleurs et marquage
    Tableau 2 - Conventions préférentielles de couleurs
    4 Variantes
      4.1 Fiche équipée
      4.2 Boîtier et raccord
    Tableau 3 - Variantes de fiches et numéro d'identification
    Tableau 4 - Variantes de raccords et numéro d'identification
    5 Exigences dimensionnelles
      5.1 Dimensions d'encombrement
    Figure 1 - Dimensions d'encombrement - Fiche
    Figure 2 - Dimensions d'encombrement - Raccord
      5.2 Face d'accouplement et autres dimensions limites
    Figure 3 - Dimensions limites de face d'accouplement de
               fiche, variante A1
    Figure 4 - Dimensions limites de face d'accouplement de
               fiche femelle, variante A2
    Figure 5 - Emplacement latéral du coeur de la fibre
    Figure 6 - Broche d'alignement
    Figure 7 - Paramètres d'extrémité liés à l'affaiblissement
               et au contact physique
    Figure 8 - Interface de boîtier femelle, variante B2
    Figure 9 - Interface de boîtier mâle, variante B3
    Figure 10 - Dimensions de la broche calibrée
    Figure 11 - Broche calibrée à deux trous
    6 Essais
      6.1 Nombre d'échantillons
      6.2 Méthodes d'essais et de mesure
      6.3 Ordre des essais
      6.4 Critères d'acceptation/rejet
    7 Rapport d'essai
    8 Exigences pour la qualification des produits
      8.1 Exigences dimensionnelles et de marquage
      8.2 Exigences de performances optiques
    Tableau 5 - Exigences de performances optiques
      8.3 Exigences de performances mécaniques
    Tableau 6 - Exigences de performances mécaniques
      8.4 Exigences de performances environnementales
    Tableau 7 - Exigences de performances environnementales
    Annexe A (normative) Prescriptions sur le nombre
             d'échantillons et d'approvisionnement
             de produits
    Annexe B (informative) Jeu de connecteurs de type MF
    Bibliographie

    Abstract - (Show below) - (Hide below)

    La présente spécification contient les exigences de performances initiales, dimensionnelles en début de vie, optiques, mécaniques et environnementales auxquelles un jeu de 4 connecteurs unimodaux empilés MF équipés et assemblés (pour applications de type fonds de panier) doit satisfaire affin d'être classé comme entrant dans une norme EN de produit. Dans la mesure où différentes variantes et différentes classes de performances sont autorisées, les détails de marquage des produits sont donnés en 3.5

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: C93-867-11-1. PR NF EN 50377-11-1 May 2007. (05/2007)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
    IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
    IEC 60794-2-30:2008 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
    NF EN 61300-2-18 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-18: TESTS - DRY HEAT - HIGH TEMPERATURE ENDURANCE
    IEC 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
    NF EN 60793-2-50 : 2017 OPTICAL FIBRES - PART 2-50: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CLASS B SINGLE-MODE FIBRES
    NF EN 61300-2-17 : 2011 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
    IEC 61300-2-17:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    IEC 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
    NF EN 61300-3-34 : 2004 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-34: EXAMINATIONS AND MEASUREMENTS - ATTENUATION OF RANDOM MATED CONNECTORS
    IEC 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
    NF EN 61300-3-28 : 2012 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS
    IEC 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
    NF EN 60794-2-30 : 2015 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
    IEC 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
    IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    NF EN 61300-2-2 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    NF EN 61753-1 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS
    NF EN 61076 4 100 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
    NF EN 61300-3-30 : 2004 FIBER OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-30: EXAMINATIONS AND MEASUREMENTS - POLISH ANGLE AND FIBER POSITION ON SINGLE FERRULE MULTIFIBRE CONNECTORS
    IEC 60793-2-50:2015 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
    NF EN 61754-5 : 2006 FIBER OPTIC CONNECTOR INTERFACES - PART 5: TYPE MT CONNECTOR FAMILY
    IEC 61300-3-30:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors
    NF EN 61300-2-19 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-19: TESTS - DAMP HEAT (STEADY STATE)
    IEC 61300-2-2:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
    NF EN 61300-2-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-1: TESTS - VIBRATION (SINUSOIDAL)
    IEC 61300-2-19:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
    NF EN 61300-3-6 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-6: EXAMINATIONS AND MEASUREMENTS - RETURN LOSS
    NF EN 61300-2-22 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-22: TESTS - CHANGE OF TEMPERATURE
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective