• NF EN 60947-2 : 2006 AMD 2 2013

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS

    Available format(s): 

    Withdrawn date:  12-10-2021

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Avant-propos
    1 Généralités
    2 Définitions
    3 Classification
    4 Caractéristiques des disjoncteurs
    5 Informations sur le matériel
    6 Conditions normales de service, de montage et de
      transport
    7 Dispositions relatives à la construction et au
      fonctionnement
    8 Essais
    Annexe A (normative) Coordination en condition de
              court-circuit entre un disjoncteur et n autre
              dispositif de protection contre les courts-circuits
              associés dans le même circuit
    Annexe B (normative) Disjoncteurs à protection incorporée
              par courant différentiel résiduel
    Annexe C (normative) Séquence d'essais en court-circuit
              sur un pole séparément
    Annexe D Disponible
    Annexe E (informative) Points faisant l'objet d'un accord
              entre le constructeur et 'utilisateur
    Annexe F (normative) Essais supplémentaires pour les
              disjoncteurs à protection électronique contre les
              surintensités
    Annexe G (normative) Puissance dissipée
    Annexe H (normative) Séquence d'essais pour les
              disjoncteurs pour réseaux IT
    Annexe J (normative) Compatibilité électromagnétique
              (CEM) - Prescriptions et méthodes d'essai pour
              les disjoncteurs
    Annexe K (informative) Glossaire des symboles pour les
              produits couverts par cette norme
    Annexe L (normative) Disjoncteurs ne satisfaisant pas aux
              prescriptions concernant les protections de
              surintensité
    Annexe M (normative) Dispositifs modulaires à courant
              différentiel résiduel (MRCD) (non intégrés à un
              dispositif de coupure de courant)
    Annexe N (normative) Compatibilité électromagnétique
              (CEM) - Prescriptions supplémentaires et méthodes
              d'essai pour les appareils non couverts par les
              Annexes B, F et M
    Annexe O
    Annexe ZA (normative) Références normatives à d'autres
              publications internationales avec les
              publications européennes correspondantes
    Annexe ZZ (informative) Couverture des Exigences
              Essentielles des Directives CE
    Bibliographie

    Abstract - (Show below) - (Hide below)

    Applies to circuit breakers, the main contacts of which are connected to circuits, the voltage of which does not exceed 1000 V a.c. or 1500 V d.c. Includes additional requirements for integrally fused circuit-breakers.

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: C63-120. Supersedes NFC 63 120. (10/2001)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 60947-3 : 2009 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
    UTEC 15 500 : 2003 DETERMINATION OF CROSS-SECTIONAL AREA OF CONDUCTORS AND SELECTION OF PROTECTIVE DEVICES WITH SOFTWARES
    NF EN 60947 6-1 : 2006 AMD 1 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT
    UTEC 15 712-2 : 2013 INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES AUTONOMES NON RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION AVEC STOCKAGE PAR BATTERIE
    NF EN 50123-1 : 2004 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL
    UTEC 15 712-1 : 2013 INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES SANS STOCKAGE ET RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION
    NF EN 61557-6 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    NF EN 60439-2 : 2000 AMD 1 2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS)
    NFC 11 201 : 1996 AMD 1 2004 PUBLIC ELECTRICAL POWER SYSTEMS
    NF EN 60077-3 : 2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: RULES FOR DC CIRCUIT-BREAKERS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60898:1995 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    NF EN 55022 : 2012 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
    IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    NF EN 61000-3-2 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    NF EN 61000 4-2 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
    IEC 60934:2000+AMD1:2007+AMD2:2013 CSV Circuit-breakers for equipment (CBE)
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    NF EN 61000-4-4 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules
    NF EN 61000-3-3 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    NF EN 61009-1 : 2013 AMD 12 2016 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    UTEC 91 005-2 : 1998 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5: INSTALLATION AND MITIGATION GUIDELINES - SECTION 2: EARTHING AND CABLING
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules
    IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
    NF EN 55011 : 2016 AMD 1 2017 INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
    IEC 60755:2017 General safety requirements for residual current operated protective devices
    NF EN 60068 2-14 : 2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    NF EN 60695-2-13 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    IEC 60051:1973 Recommendations for direct acting indicating electrical measuring instruments and their accessories
    NF EN 61000 4-6 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
    NF EN 60068 2-30 : 2006 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
    NF EN 61000-4-3 : 2006 AMD 2 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    NF EN 60695-2-10 : 2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
    NF EN 60695-2-11 : 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
    NF EN 61000-4-11 : 2004 AMD 1 2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    NF EN 61000-4-13 : 2002 AMD 2 2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
    NF EN 60934 : 2001 AMD 2 2013 CIRCUIT-BREAKERS FOR EQUIPMENT (CBE)
    NF EN 60898 : 92 AMD 19 2001 DISJONCTEURS DE PROTECTION CONTRE LES SURINTENSITES POUR INSTALLATIONS DOMESTIQUES ET ANALOGUES
    NF EN 60947 4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
    IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
    NF EN 60695-2-12 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective