• NF EN 62052-21 : 2006

    Current The latest, up-to-date edition.

    ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT

    Available format(s): 

    Language(s): 

    Published date:  13-01-2013

    Publisher:  Association Francaise de Normalisation

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    AVANT PROPOS
    INTRODUCTION
    1 Domaine d'application
    2 Références normatives
    3 Termes et définitions
      3.1 Définitions générales
      3.2 Définitions relatives aux récepteurs électroniques de
           télécommande centralisée
      3.3 Définitions liées au code de commande centralisé et à
           l'élément de controle
      3.4 Définitions liées aux horloges de tarification
      3.5 Définitions relatives aux éléments de sortie
      3.6 Définitions des éléments mécaniques
      3.7 Définitions relatives à l'isolation
      3.8 Définitions relatives aux grandeurs d'influence
      3.9 Définition des essais
    4 Valeurs électriques normalisées
      4.1 Tension de référence normalisée (Un)
      4.2 Fréquence de référence normalisée (fn)
    5 Exigences mécaniques et essais
      5.1 Prescriptions générales de mécanique
      5.2 Boîtier
      5.3 Fenêtre
      5.4 Bornes, plaque à bornes et borne de terre de protection
      5.5 Couvre-borne
      5.6 Distances d'isolement et lignes de fuite
      5.7 Equipement de tarification et controle de charge à
           boîtier isolant de classe de protection II
      5.8 Résistance à la chaleur et au feu
      5.9 protection contre la pénétration de poussières et d'eau
      5.10 Vide
      5.11 Vide
      5.12 Marquage des équipement de tarification et de controle
           de charge
    6 Conditions climatiques, exigences et essais
      6.1 Plage de température
      6.2 Humidité relative
      6.3 Essais des effets de l'environnement climatique
    7 Exigences électriques et essais
      7.1 Tension d'alimentation
      7.2 Echauffements
      7.3 Isolement
      7.4 Eléments de sortie
      7.5 Prescriptions fonctionnelles et essais
      7.6 Compatibilité électromagnétique (CEM)
      7.7 Suppression des perturbations radioélectriques
    8 Conditions d'essai et essai de type
      8.1 Conditions d'essai
      8.2 Essai de Type
    Annexe A normative) Relation entre la température de l'air
              ambiant et l'humidité relative
    Annexe B (normative) Valeurs de référence et de limite des
              grandeurs d'influence
    Annexe C (normative) Electro-aimant pour tester l'influence
              des champs magnétiques produits à l'extérieur
    Annexe D (informative) Montage d'essai pour les essais CEM
    Annexe E (informative) Programme d'essai
    Annexe F (informative) Essais d'acceptation
    Annexe ZA (normative) Références normatives à d'autres publications
              internationales avec les publications européennes
              correspondantes
    Annexe ZB (normative) Conditions nationales particulières
    Annexe ZZ (informative) Couverture des Exigences essentielles
              des Directives CE
    Bibliographie
    Figure A.1 - Relation entre la température de l'air ambiant
                  et l'humidité relative
    Figure C.1 - Electro-aimant pour tester l'influence des champs
                  magnétiques produits à l'extérieur
    Figure D.1 - Montage d'essai pour l'immunité aux champs
                  électromagnétiques HF
    Figure D.2 - Montage d'essai pour les transitoires rapides
                  en salve
    Tableau 1 - Distances d'isolement et lignes de fuite pour
                  des équipements de tarification et controle de
                  charge à boîtier isolant de classe de protection I.
    Tableau 2 - Distances d'isolement et lignes de fuite pour
                  des équipements de tarification et controle de
                  charge à boîtier isolant de classe de protection II.
    Tableau 3 - Plage de température
    Tableau 4 - Humidité relative
    Tableau 5 - Plage de tension
    Tableau 6 - Consommation de puissance
    Tableau 7 - Tension de coupure assignée
    Tableau 8 - Courants de coupure assignés
    Tableau B.1 - Valeurs de référence et de limite
    Tableau 1 - Programme d'essai
    Tableau F.1 - plan d'échantillonnage simple
    Tableau F.2 - Plan d'échantillonnage double

    Abstract - (Show below) - (Hide below)

    Defines general requirements for the type test of newly manufactured indoor tariff and load control equipment, like electronic ripple control receivers and time switches that are used to control electrical loads, multi-tariff registers and maximum demand indicator devices.

    General Product Information - (Show below) - (Hide below)

    Development Note Indice de classement: C44-100-21. PR NF EN 62052-21 December 2002. (12/2002) Supersedes NF EN 61037 & NF EN 61038. (03/2017)
    Document Type Standard
    Publisher Association Francaise de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 62054-21 : 2006 AMD 1 2017 ELECTRICITY METERING (A.C.) - TARIFF AND LOAD CONTROL - PART 21: PARTICULAR REQUIREMENTS FOR TIME SWITCHES

    Standards Referencing This Book - (Show below) - (Hide below)

    NF EN 60068 2-75 : 2015 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    NF EN 55022 : 2012 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
    IEC 62054-21:2004+AMD1:2017 CSV Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches
    NFC 41 101 : 1995 HIGH VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    NF EN 60068-2-2 : 2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT
    NF EN ISO 75-2 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
    HD 588.1 : S1 AMD 1 HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
    ISO 75-2:2013 Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite
    HD 630.3.1 S3:2002 LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
    NF EN 60068-2-1 : 2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD
    NFC 26 206 : 1985 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
    HD 566 : 200S1 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60417-2:1998 Graphical symbols for use on equipment - Part 2: Symbol originals
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    NF EN 60068 2-6 : 2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
    NF EN 60068 2-27 : 2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    NF EN 62054-21 : 2006 AMD 1 2017 ELECTRICITY METERING (A.C.) - TARIFF AND LOAD CONTROL - PART 21: PARTICULAR REQUIREMENTS FOR TIME SWITCHES
    NF EN 61000 4-6 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    NFC 01 300 : 2001 AMD 2 2017 ELECTROTECHNICAL VOCABULARY - ELECTRICAL AND ELECTRONIC MEASUREMENTS AND MEASURING INSTRUMENTS - PART 311: GENERAL TERMS RELATING TO MEASUREMENTS - PART 312: GENERAL TERMS RELATING TO ELECTRICAL MEASUREMENTS - PART 313: TYPES OF ELECTRICAL MEASURING INSTRUMENTS - PART 314: SPECIFIC TERMS ACCORDING TO THE TYPE OF INSTRUMENT
    IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    NFC 61 203 : 2005 LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS I TO IV: EXAMPLES OF TYPES OF STANDARDIZED FUSES
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    NF EN 60068 2-30 : 2006 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    NF EN 60695-2-10 : 2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
    NF EN 60695-2-11 : 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
    IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    IEC 62054-11:2004+AMD1:2016 CSV Electricity metering (a.c.) - Tariff and load control - Part 11:Particular requirements for electronic ripple control receivers
    IEC 60050-300:2001 International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
    NF EN 62054-11 : 2006 ELECTRICITY METERING (A.C.) - TARIFF AND LOAD CONTROL - PART 11: PARTICULAR REQUIREMENTS FOR ELECTRONIC RIPPLE CONTROL RECEIVERS
    NF EN 60721 3-3 : 95 AMD 2 97 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 3: STATIONARY USE AT WEATHER-PROTECTED LOCATIONS
    IEC 60269-3-1:2004 Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective