NFPA 306 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CONTROL OF GAS HAZARDS ON VESSELS
Hardcopy
17-11-2018
English
01-01-2014
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - Vessels Required to Have Marine Chemist's
Certificate
Chapter 5 - Preparing Vessels by the Vessel Owner,
Operator, or Repairer, for Issuance of a
Marine Chemist's Certificate Involving Hot
Work
Chapter 6 - Procedures for the Marine Chemist Prior to
Issuance of a Certificate
Chapter 7 - Standard Safety Designations and Conditions
Required
Chapter 8 - The Marine Chemist's Certificate
Chapter 9 - Additional Requirements for Flammable
Cryogenic Liquid Carriers
Annex A - Explanatory Material
Annex B - Examples of Safe Conditions
Annex C - Samples of Marine Chemist's Certificates
Annex D - Guidance to Vessel Owners and Operators When
Hot Work and/or Enclosed/Confined Space Entry
Is Conducted on a Vessel at Sea and a Marine
Chemist Is Not Required
Annex E - Limiting Oxidant Concentrations
Annex F - Informational References
Index
Gives minimum requirements and conditions for use in determining that a space or area on a vessel, or in a shipyard or ship repair facility, is safe for entry or work.
DocumentType |
Standard
|
Pages |
33
|
PublisherName |
National Fire Protection Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API MPM CH2.8B : 1995 : R2005 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 8B: RECOMMENDED PRACTICE FOR THE ESTABLISHMENT OF THE LOCATION OF THE REFERENCE GAUGE POINT AND THE GAUGE HEIGHT OF TANKS ON MARINE TANK VESSELS |
API MPM CH2.2A : 1995(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARD - CHAPTER 2 - TANK CALIBRATION - SECTION 2A - MEASUREMENT AND CALIBRATION OF UPRIGHT CYLINDRICAL TANKS BY THE MANUAL TANK STRAPPING METHOD |
API MPM CH2.2A : 1995 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARD - CHAPTER 2 - TANK CALIBRATION - SECTION 2A - MEASUREMENT AND CALIBRATION OF UPRIGHT CYLINDRICAL TANKS BY THE MANUAL TANK STRAPPING METHOD |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
NFPA 1405 : 2016 | LAND-BASED FIRE DEPARTMENTS THAT RESPOND TO MARINE VESSEL FIRES |
ASTM F 2039 : 2000 | Standard Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
ASTM F 2039 : 2000 : R2006 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
NFPA 901 : 2016 | CLASSIFICATIONS FOR INCIDENT REPORTING AND FIRE PROTECTION DATA |
API MPM CH2.2A:1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARD - CHAPTER 2 - TANK CALIBRATION - SECTION 2A - MEASUREMENT AND CALIBRATION OF UPRIGHT CYLINDRICAL TANKS BY THE MANUAL TANK STRAPPING METHOD |
API MPM CH2.8A : 1991(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
API MPM CH2.8B : 1995(R2014) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 8B: RECOMMENDED PRACTICE FOR THE ESTABLISHMENT OF THE LOCATION OF THE REFERENCE GAUGE POINT AND THE GAUGE HEIGHT OF TANKS ON MARINE TANK VESSELS |
MIL-STD-3026 Revision A:2017 | CHEMICAL CLEANING OF SEWAGE COLLECTION PIPING SYSTEMS ON NAVY SURFACE SHIPS |
API MPMS CH2.7 : 1991(R2014) | Tank Calibration: Calibration of Barge Tanks |
NFPA 1123 : 2018 | Code for Fireworks Display<br> |
NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
API MPM CH2.8B : 1995 : R2009 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 8B: RECOMMENDED PRACTICE FOR THE ESTABLISHMENT OF THE LOCATION OF THE REFERENCE GAUGE POINT AND THE GAUGE HEIGHT OF TANKS ON MARINE TANK VESSELS |
API MPM CH2.2A : 1995 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARD - CHAPTER 2 - TANK CALIBRATION - SECTION 2A - MEASUREMENT AND CALIBRATION OF UPRIGHT CYLINDRICAL TANKS BY THE MANUAL TANK STRAPPING METHOD |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
API MPM CH2.7 : 1991 : R2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 7: CALIBRATION OF BARGE TANKS |
NFPA 115 : 2016 | LASER FIRE PROTECTION |
API 1141 : 1994 | GUIDELINES FOR CONFINED SPACE ENTRY ON BOARD TANK SHIPS IN THE PETROLEUM INDUSTRY |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
API MPM CH2.8B : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 8B: RECOMMENDED PRACTICE FOR THE ESTABLISHMENT OF THE LOCATION OF THE REFERENCE GAUGE POINT AND THE GAUGE HEIGHT OF TANKS ON MARINE TANK VESSELS |
API MPM CH2.7:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2: TANK CALIBRATION - SECTION 7: CALIBRATION OF BARGE TANKS |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
API MPM CH2.8A:1991 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
API MPM CH2.8A : 1991 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
API MPM CH2.8A : 1991 : R2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 2 - TANK CALIBRATION - SECTION 8A - CALIBRATION OF TANKS ON SHIPS AND OCEANGOING BARGES |
ASTM F 2039 : 2000 : R2012 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
ASTM F 2039 : 2000 : R2018 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
NFPA 312 : 2011 | FIRE PROTECTION OF VESSELS DURING CONSTRUCTION, CONVERSION, REPAIR, AND LAY-UP |
API 1141 : 1994 | GUIDELINES FOR CONFINED SPACE ENTRY ON BOARD TANK SHIPS IN THE PETROLEUM INDUSTRY |
CFR 29(PTS1911-1919) : 1984 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 77 : 2014 | STATIC ELECTRICITY |
CFR 46(PTS1-40) : OCT 2017 | SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.