NFPA 70 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NATIONAL ELECTRICAL CODE
25-08-2021
01-01-2017
Introduction
Chapter 1 - General
Chapter 2 - Wiring and Protection
Chapter 3 - Wiring Methods and Materials
Chapter 4 - Equipment for General Use
Chapter 5 - Special Occupancies
Chapter 6 - Special Equipment
Chapter 7 - Special Conditions
Chapter 8 - Communications Systems
Chapter 9 - Tables
Informative Annex A - Product Safety Standards
Informative Annex B - Application Information for
Ampacity Calculation
Informative Annex C - Conduit and Tubing Fill Tables
for Conductors and Fixture Wires of the
Same Size
Informative Annex D - Examples
Informative Annex E - Types of Construction
Informative Annex F - Availability and Reliability for
Critical Operations Power Systems; and
Development and Implementation of
Functional Performance Tests (FPTs)
for Critical Operations Power Systems
Informative Annex G - Supervisory Control and Data
Acquisition (SCADA)
Informative Annex H - Administration and
Enforcement
Informative Annex I - Recommended Tightening
Torque Tables from UL Standard 486A-B
Informative Annex J - ADA Standards for Accessible
Design
Index
Includes the installation and removal of electrical conductors, equipment, and raceways; signaling and communications conductors, equipment, and raceways; and optical fiber cables and raceways for the following: (1) Public and private premises, including buildings, structures, mobile homes, recreational vehicles, and floating buildings; (2) Yards, lots, parking lots, carnivals, and industrial substations; (3) Installations of conductors and equipment that connect to the supply of electricity; and (4) Installations used by the electric utility, such as office buildings, warehouses, garages, machine shops, and recreational buildings, that are not an integral part of a generating plant, substation, or control center.
DevelopmentNote |
NFPA 70 is also included in NFPA 70 SET. (05/2003) 2008 version is also available in Spanish (See NFPA 70 SPANISH). Also available with NFPA 70E and NFPA 70B. (01/2013) 2017 NEC Spiralbound is also available. (07/2016)
|
DocumentType |
Standard
|
PublisherName |
National Fire Protection Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 520 : 2016 | SUBTERRANEAN SPACES |
IEEE 303-2004 | IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
API 49 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
UFC 4-740-16 : 2005 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY RECREATION CENTERS |
NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
ASHRAE 41.11 : 2014 | METHODS FOR POWER MEASUREMENT |
API 2003 REDLINE : 2008 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
MIL-P-52281 Revision B:1978 | PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES |
MIL-B-17452 Revision E:1990 | BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
AAMI ST65 : 2008 : R2013 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
IEEE C37.16-2009 | IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers |
IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
GR 1398 CORE : ISSUE 1 REV 1 | GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE |
IEEE 487.3-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities |
IEEE DRAFT C62.48 : D10 2003 | GUIDE ON INTERACTIONS BETWEEN POWER SYSTEM DISTURBANCES AND SURGE-PROTECTIVE DEVICES |
MIL-PRF-12571 Revision R:1998 | REFRIGERATOR, MECHANICAL, FIELD, PORTABLE WALK-IN, PLUG-IN (150 CUBIC FEET) |
API MPM CH4.2 : 2003 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS |
OO-P-2895 Base Document:1997 | PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY |
NFPA 232A : 1995 | ARCHIVES AND RECORDS CENTERS |
BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
TIA 942 : B2017 | TELECOMMUNICATIONS INFRASTRUCTURE STANDARD FOR DATA CENTERS |
BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
FM 3150 : 2003 | AUDIBLE NOTIFICATION APPLIANCES FOR AUTOMATIC FIRE ALARM SIGNALING |
13/30288591 DC : 0 | BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE |
AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
NFPA 481 : 2000 | PRODUCTION, PROCESSING, HANDLING, AND STORAGE OF TITANIUM |
NFPA 42 : 2002 | STORAGE OF PYROXYLIN PLASTIC |
BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
MIL-A-26846 Revision B:1984 | AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN |
MIL-G-17713 Revision D:1988 | GAGES, LIQUID LEVEL MEASURING, TANK |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
SAE J2293/1_201402 | Energy Transfer System for Electric Vehicles - Part 1: Functional Requirements and System Architectures |
API MPMS CH4.2 : 2003 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS |
10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
MIL-T-17585 Revision C:1983 | THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE |
NFPA 8506 : 1998 | HEAT RECOVERY STEAM GENERATOR SYSTEMS |
IEEE 1268-2005 | IEEE Guide for Safety in the Installation of Mobile Substation Equipment |
MIL-B-29205 Revision A:1990 | BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY) |
MIL-T-45305 Revision C:1991 | TRUCK. BOOKMOBILE: DIESEL OR GASOLINE ENGINE DRIVEN, 16,000 POUNDS GVW, 4X2, MODIFIED COMMERCIAL |
API 500B : 88 ERRATA | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT DRILLING RIGS & PRODUCTION FACILITIES ON LAND & ON MARINE FIXED & MOBILE PLATFORMS |
EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
UFC 3-501-01 : 2015 | UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING |
IEEE 844-2000 | IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels |
API 685 : 2011 | SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE |
ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
ASTM F 1764 : 1997 : R2012 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
ANSI B11.21 : 2006 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
MIL-HDBK-705 Revision C:1987 | GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS |
ISA 12.27.01 : 2003 | REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS |
ANSI/AWWA D107-16 ERR 1(CSV) | COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
18/30368743 DC (published 2018-04) | BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
API 536 : 2017 | POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES |
DD IEC/TS 61968-2:2011 | Application integration at electric utilities. System interfaces for distribution management Glossary |
BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
ASTM C 1015 : 2017 : REDLINE | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
BS ISO 3977-3:2004 | Gas turbines. Procurement Design requirements |
ANSI C37.16-2009 | LOW-VOLTAGE POWER CIRCUIT BREAKERS AND AC POWER CIRCUIT PROTECTORS - PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS |
FM 7745 : 2012 | HYDROCARBON LEAK DETECTORS |
ANSI B11.3 : 2012 | SAFETY REQUIREMENTS FOR POWER PRESS BRAKES |
KKK-S-2922 Base Document:1997 | SEMITRAILER, VAN; COMMERCIAL (FURNITURE, PERSONNEL, REFRIGERATOR, CARGO, AND SIDE CURTAIN) 7 TO 35 TON |
AWS BRH:2007 | BRAZING HANDBOOK |
AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
IEEE 1590-2009 | IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems |
IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
ANSI/ASSE A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
MIL B 0043998 : C | BATH UNIT, AUTOMATED, MULTI-HEAD |
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
CSA M688:2010 | PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY |
MIL-H-45193 Revision D:1985 | HEATER, GUN TYPE, ELECTRIC |
ANSI/ASSE A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
ANSI B11.12 : 2005 : R2010 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
API 11P : 1989 | SPECIFICATION FOR PACKAGED RECIPROCATING COMPRESSORS FOR OIL AND GAS PRODUCTION SERVICES |
FIPS PUB 94 : 0 | GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS |
CSA C22.2 No. 2420 : 2009 : R2014 | BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
ASTM C 852/C852M : 2017 : REDLINE | Standard Guide for Design Criteria for Plutonium Gloveboxes |
ANSI A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
CGA 6.14 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
CSA M688 : 2010 : R2015 | PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY |
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
IEEE C57.147-2008 | IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
CSA/ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 | METALLIC OUTLET BOXES |
ANSI B11.20 : 2004 : R2009 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
CSA 12.8 : 2002 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
SAE AS 6479 : 2014 | SPLICER, FUSION, FIBER OPTIC, AEROSPACE |
ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
CSA C22.2 No. 41 :2013 | GROUNDING AND BONDING EQUIPMENT |
ANSI B11.6 : 2001 : R2012 | SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
CSA/ANSI NGV4.8 :2012 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
GGG-D-2782 Base Document:1991 | DRIVE, POWER, PORTABLE; FOR PIPE AND BOLT THREADING, ELECTRIC (WITH ACCESSORIES) |
MIL-A-28890 Base Document:1984 | ANTENNA GROUP, OE-207/BR |
API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
SCTE 15 : 2016 | SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE |
GG-X-635 Revision D:1963 | X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL |
IEEE DRAFT 1036 : D13A 2006 | APPLICATION OF SHUNT POWER CAPACITORS |
IEC 60974-6:2015 | Arc welding equipment - Part 6: Limited duty equipment |
FM 3600 : 2018 | ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
NASA STD 8719.10 : 2006 | UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS |
API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
IEEE 3001.11-2017 | IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems |
CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
API 1631 : 2001 | INTERIOR LINING AND PERIODIC INSPECTION OF UNDERGROUND STORAGE TANKS |
CSA/ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
IEEE DRAFT 1202 : 0 | FLAME-PROPAGATION TESTING OF WIRE AND CABLE |
SAE J2954_201711 | Wireless Power Transfer for Light-Duty Plug-In/Electric Vehicles and Alignment Methodology |
NFPA 53M : 1990 | FIRE HAZARDS IN OXYGEN-ENRICHED ATMOSPHERES |
I.S. EN 60079-30-2:2017 | EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
ANSI E1.42 : 2016 | ENTERTAINMENT TECHNOLOGY - DESIGN, INSTALLATION, AND USE OF ORCHESTRA PIT LIFTS |
AWS WHC2.12 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 12: BRAZING |
NFPA 102 : 2016 | GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES |
S.R. HD 60364-4-42:2011 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS |
ANSI B77.2 : 2014 | FUNICULARS - SAFETY REQUIREMENTS |
API 500A : 4ED 82(R1987) | CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS IN PETROLEUM REFINERIES |
AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
I.S. EN 60445:2017 | BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS |
ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
IEEE 3001.8-2013 | IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems |
AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
SAE ARD 50102 : 2002 | FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS |
API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
ASTM F 1047 : 2017 : REDLINE | Standard Specification for Frying and Braising Pans, Tilting Type |
CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
AWS C1.1M/C1.1 : 2012 | RECOMMENDED PRACTICES FOR RESISTANCE WELDING |
IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
ANSI/AAMI ST8:2013(R2018) | HOSPITAL STEAM STERILIZERS |
CSA C22.2 No. 2459 : 2008 : INC : UPD 1 : 2014 : R201300 | INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
IEEE 13161 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
ASTM F 2361 : 2003 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
AAMI ST65:2008(R2018) | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
AAMI ST24 : 1999 : R2013 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
C22.2 NO. 126.1-17 | Metal cable tray systems (Binational standard with NEMA VE 1-2017) |
NFPA 497M : 1991 | CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
CSA C293.2 : 2017 | STANDARD FOR SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - APPLICATION GUIDE FOR DESIGN, INSTALLATION, TESTING, COMMISSIONING, AND MAINTENANCE |
UNE-EN 60974-6:2011 | Arc welding equipment - Part 6: Limited duty equipment |
NSF 245 : 2013 | RESIDENTIAL WASTEWATER TREATMENT SYSTEMS - NITROGEN REDUCTION |
AWWA D104 : 2017 | AUTOMATICALLY CONTROLLED, IMPRESSED-CURRENT CATHODIC PROTECTION FOR THE INTERIOR SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS |
NFPA 61B : 1989 | PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES |
NACE SP 01 00 : 2014 | CATHODIC PROTECTION TO CONTROL EXTERNAL CORROSION OF CONCRETE PRESSURE PIPELINES AND MORTAR-COATED STEEL PIPELINES FOR WATER OR WASTE WATER SERVICE |
ASTM F 2461 : 2016-12 | PRACTICE FOR MANUFACTURE, CONSTRUCTION, OPERATION, AND MAINTENANCE OF AQUATIC PLAY EQUIPMENT |
ANSI Z4.4 : 2016 | SANITATION - IN FIELDS AND TEMPORARY LABOR CAMPS - MINIMUM REQUIREMENTS |
IEEE 1578-2007 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
NSF 401 : 2017 | DRINKING WATER TREATMENT UNITS - EMERGING COMPOUNDS/INCIDENTAL CONTAMINANTS |
IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
NFPA 25 HANDBOOK : 2011 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK |
AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
ASTM B 812 : 1996 : R2013 | Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications |
ASTM F 2520 : 2005 | Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets |
CSA C22.2 No. 153:2009 | ELECTRICAL QUICK-CONNECT TERMINALS |
ASTM F 1203 : 2016 : REDLINE | Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type |
GR 324 CORE : ISSUE 1 | MAINTENANCE TERMINATION UNIT: GENERIC REQUIREMENTS FOR APPLICATION ON SINGLE-PARTY LOOP-START LINES |
ASTM F 2699 : 2008 : R2013 | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas |
TR NWT 000397 : ISSUE 3 | ISDN BASIC ACCESS TRANSPORT SYSTEM REQUIREMENTS |
C22.2 NO. 355-18 | Sealed twist-on connecting devices (Trinational standard with UL 486G and ANCE NMX-J-745) |
ASTM F 1764 : 1997 : R2007 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
ASTM C 1320 : 2010 : R2016 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
ASTM F 1217 : 2017 : REDLINE | Standard Specification for Cooker, Steam |
ASTM E 2543 : 2008 : R2014 | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
SAE J2697_201702 | Inverter Requirements for Class Eight Trucks - Truck and Bus |
SAE J2698_201411 | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus |
SAE J2836/3_201701 | Use Cases for Plug-In Vehicle Communication as a Distributed Energy Resource |
ASTM F 2796 : 2009 : R2014 | Standard Specification for Hot Food Holding Tables |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
SAE J2851_201502 | Recovery Equipment for Contaminated R-134a or R-1234yf Refrigerant from Mobile Automotive Air Conditioning Systems |
ASTM F 2361 : 2003 : R2013 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
ASTM F 1916 : 1998 | Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008) |
ASTM E 2542 : 2008 : R2014 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
ASTM F 1150 : 2016 : REDLINE | Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly |
ASTM C 1217 : 2000 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
ASTM D 6871 : 2017 | Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus |
NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
NFPA 99B : 2018 | HYPOBARIC FACILITIES |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
NFPA 214 : 2016 | WATER-COOLING TOWERS |
NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
NFPA 225 : 2017 | MODEL MANUFACTURED HOME INSTALLATION STANDARD |
NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
NFPA 505 : 2018 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
NFPA 262 : 2015 | METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
NFPA 79 : 2018 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
NFPA 418 : 2016 | HELIPORTS |
NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
NFPA 87 : 2018 | FLUID HEATERS |
NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
NFPA 730 : 2018 | GUIDE FOR PREMISES SECURITY |
NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
NFPA 557 : 2016 | DETERMINATION OF FIRE LOAD FOR USE IN STRUCTURAL FIRE PROTECTION DESIGN |
NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
NFPA 34 : 2018 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
NFPA 550 : 2017 | FIRE SAFETY CONCEPTS TREE |
NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
NFPA 92 : 2018 | SMOKE CONTROL SYSTEMS |
IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
IEEE C37.23-2003 | IEEE Standard for Metal-Enclosed Bus |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
IEEE 1566-2015 | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
CSA C22.2 No. 104 : 2011 : R2015 | HUMIDIFIERS |
PD IEC/TR 62368-2:2015 | Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1 |
BS EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
IEC 60695-1-40:2013 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
NFPA 650 : 1998 | PNEUMATIC CONVEYING SYSTEMS FOR HANDLING COMBUSTIBLE PARTICULATE SOLIDS |
I.S. EN ISO 13705:2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE (ISO 13705:2012) |
ANSI E1.24 : 2012(R2017) | ENTERTAINMENT TECHNOLOGY - DIMENSIONAL REQUIREMENTS FOR STAGE PIN CONNECTORS |
CEN/TR 16793:2016 | Guide for the selection, application and use of flame arresters |
HD 60364-4-42 : 2011 AMD 1 2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
HD 60364-5-52:2011/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
IEEE 844.2/CSA C293.2-2017 | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance |
ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 | 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
UFC 4-021-01 : Change 1 | UNIFIED FACILITIES CRITERIA - DESIGN AND O&M;: MASS NOTIFICATION SYSTEMS |
UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
ANSI E1.29 : 2009(R2014) | PRODUCT SAFETY STANDARD FOR THEATRICAL FOG GENERATORS THAT CREATE AEROSOLS OF WATER, AQUEOUS SOLUTIONS OF GLYCOL OR GLYCERIN, OR AEROSOLS OF HIGHLY REFINED ALKANE MINERAL OIL |
UFC 3-430-02FA : Change 1 | UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS |
FC 4-211-03F : 2016 | FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY |
ASME B30.24 : 2013 | Container Cranes (B30.24 - 2013) |
MIL-B-44037 Revision A:1986 | BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED |
MIL-T-37213 Revision A:1976 | TIMER, INTERVAL 115 VOLT 60 HZ AC |
GG-I-488-1 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, SMALL |
NEMA WC 63.2:1996(R2003) | Performance Standard for Coaxial Premise Data Communications Cables |
GG-I-488 Revision C:1957 | INCUBATOR, BACTERIOLOGICAL |
UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
MIL-B-18897 Revision F:1990 | BOILERS, STEAM AND HOT WATER, WATERTUBE (STRAIGHT BARE AND FINNED TUBE), CAST IRON AND FIREBOX, PACKAGED TYPE (40,000 TO 35,000 BTU/HR THERMAL OUTPUT CAPACITY) |
PIP ELSAP01 : 2017 | DESIGN AND FABRICATION OF UTILITY TYPE BATTERY CHARGERS |
NFPA 58:2024 | Liquefied Petroleum Gas Code |
ANS 57.7-1988(R1997) | DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE) |
ASME HST 2 : 2014 | PERFORMANCE STANDARD FOR HAND CHAIN MANUALLY OPERATED CHAIN HOISTS |
ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
MIL-B-23170 Revision A:1978 | BOILERS, STEAM, HIGH PRESSURE WATER TUBE, PACKAGED TYPE (5,000 TO 50,000 POUNDS PER HOUR, FIRED BY COAL, OIL, GAS OR COMBINATION OIL/GAS) |
FC 4-721-02F : 2015 | FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY |
MIL-C-29184 Revision B:1991 | Cable Assemblies, Power, Electrical, for Portable Panelboards, General Specification for |
ASME B30.29 : 2012 | SELF-ERECTING TOWER CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
ASME B30.20 : 2013 | Below-the-Hook Lifting Devices (B30.20 - 2013) |
MIL-L-970 Revision C:1977 | LAMPHOLDERS AND STARTER SOCKETS, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD USE) |
UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
UFC 3-440-01 : V20020614 | UNIFIED FACILITIES CRITERIA - FACILITY-SCALE RENEWABLEENERGY SYSTEMS |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME B30.25 : 2013 | SCRAP AND MATERIAL HANDLERS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
MIL P 29183 : B | PANELBOARD, POWER DISTRIBUTION PORTABLE WEATHERPROOF, GENERAL SPECIFICATION FOR |
ASHRAE 128 : 2011 | METHOD OF RATING PORTABLE AIR CONDITIONERS |
MIL-B-18796 Revision F:1984 | BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
MIL-G-19826 Revision F:1984 | GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED) |
OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
F-P-2908 Base Document:1997 | PUMPING UNIT, CONDENSATE, RETURN, AND BOILER FEED PACKAGE |
GG-I-488-2 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, MEDIUM |
GG-I-488-3 Base Document:1976 | INCUBATOR BACTERIOLOGICAL, LARGE |
A-A-52143 Base Document:1994 | ICE CREAM CABINETS, MECHANICALLY-REFRIGERATED DISPENSING, MOBILE, SELF-ELEVATING |
MIL-P-53065 Base Document:1986 | PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD |
MIL-W-37045 Base Document:1974 | WATER BATH, ELECTRIC, SEROLOGICAL, 6 RACK, 115 VOLT, 50-60 HZ, AC |
W-R-550 Revision A:1975 | ROD, GROUND (WITH ATTACHMENTS) |
UFC 4-150-02 : Change 5 | UNIFIED FACILITIES CRITERIA - DOCKSIDE UTILITIES FOR SHIP SERVICE |
F-F-320 Revision C:1998 | FILTERS, ELECTRONIC AIR CLEANING, IONIZING PLATE TYPE |
MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
ASME HST 1 : 2012 | PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS |
UFC 4-826-10 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
MIL-PRF-32017 Base Document:1997 | REFRIGERATION SYSTEM, ADVANCED DESIGN |
ASHRAE GUIDELINE 13 : 2014 | SPECIFYING BUILDING AUTOMATION SYSTEMS |
ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
MIL C 38159 : B | CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR |
MIL-PRF-44466 Revision D:2006 | HEATER, WATER AND RATION (HWR) |
MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
MIL-DTL-29183 Revision C:2003 | PANELBOARDS, POWER DISTRIBUTION, PORTABLE, WEATHERPROOF, GENERAL SPECIFICATION FOR |
MIL-A-83477 Revision A:1976 | AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
A-A-59468 Base Document:1999 | Ice Making Machine, Cube and Flake (Naval Shipboard) |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
MIL HDBK 1040 : 0 | BASIC GUIDELINES FOR CHEMICAL WARFARE HARDENING OF NEW MILITARY FACILITIES |
MIL-A-43657 Base Document:1969 | ABSORBER, VAPOR, SYNTHETIC SOLVENT DRY CLEANING UNITS |
MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
UFC 4-133-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - AIR TRAFFIC CONTROL AND AIR OPERATIONS FACILITIES |
CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
UFC 4-141-04 : Change 1 | UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN |
A-A-52192 Base Document:1994 | DISPENSER, CARBONATED BEVERAGE, MECHANICALLY REFRIGERATED |
MIL-PRF-43891 Revision C:1997 | REFRIGERATION UNITS, ELECTRIC, 9000 BTU FOR MILITARY VAN CONTAINER, REFRIGERATED, INSULATED |
ASHRAE 189.1 : 2014 | DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
MIL-W-44167 Revision B:1992 | WASHING MACHINE, LAUNDRY: OPEN END TYPE, TRAILER MOUNTED |
MIL-H-82000 Revision C:1990 | HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED |
A-A-52139 Base Document:1993 | ICE MAKING MACHINE, CUBE |
A-A-52150 Base Document:1994 | REFRIGERATOR-FREEZER, EXPLOSION PROOF, NON-FOOD, LABORATORY |
MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
A-A-2001 Base Document:1995 | LIGHT SET, GENERAL ILLUMINATION (EMERGENCY OR AUXILIARY) |
UFC 3-440-05N : Change 2 | UNIFIED FACILITIES CRITERIA - TROPICAL ENGINEERING |
IPC 1331 : 0 | VOLUNTARY SAFETY STANDARD FOR ELECTRICALLY HEATED PROCESS EQUIPMENT |
F-B-2910 Base Document:1998 | BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125, 000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
SAE AS 6228 : 2014 | SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS |
MIL-PRF-32335 Base Document:2010 | TRICON REFRIGERATED CONTAINER SYSTEM (TRCS) |
UFC 4-420-01 : 2015 | UNIFIED FACILITIES CRITERIA - AMMUNITION AND EXPLOSIVES STORAGE MAGAZINES |
FC 4-218-01F : 2015 | FACILITIES CRITERIA - AIR FORCE CRITERIA FOR PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION |
SSPC-GUIDE 12 : 2016 | GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS |
ASHRAE 15 USER'S MANUAL : 2002 | USER'S MANUAL FOR ANSI/ASHRAE STANDARD 15-2001, SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
MIL-HDBK-1004-6 Base Document:1986 | LIGHTNING PROTECTION |
A-A-59187 Base Document:1998 | RANGE, CONVECTION OVEN, ELECTRIC, MODULAR (NAVAL SHIPBOARD) |
MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
MIL-B-43928 Revision A:1987 | BROILER, CONVEYORIZED, INFRARED, ELECTRIC |
CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
ASME B30.13 : 2017 | STORAGE/RETRIEVAL (S/R) MACHINES AND ASSOCIATED EQUIPMENT - SAFETY STANDARD FOR CABLEWAYS, CRANES, HOISTS, HOOKS, JACKS, AND SLINGS |
OO-S-256 Revision K:2012 | Sewing Machine, Industrial, General Specification for |
OO-A-373 Revision D:1998 | AIR CONDITIONER, SELF CONTAINED SPACE TYPES, WATER, AIR OR EVAPORATIVE COOLED |
MIL-PRF-32109 Base Document:2002 | FLOODLIGHT SET, ELECTRIC, PORTABLE |
IPC FC 213 : 1984 | PERFORMANCE SPECIFICATION FOR FLAT UNDERCARPET TELEPHONE CABLE |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
ISA TR12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2 |
04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
NFPA 434 : 2002 | CODE FOR THE STORAGE OF PESTICIDES |
API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
FM 3620 : 2018 | PURGED AND PRESSURIZED ELECTRICAL EQUIPMENT FOR HAZARDOUS (CLASSIFIED) LOCATIONS |
API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
PREN ISO 13705 : DRAFT 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
API 1125 : 1991 | OVERFILL CONTROL SYSTEMS FOR TANK BARGES |
MIL-DTL-83521-5 Revision A:2018 | MAINTENANCE KITS, ELECTRICAL CONNECTORS, CONTACTS AND CONNECTOR AND CABLE ACCESSORIES: MAINTENANCE KIT, GENERAL PURPOSE (AIR/NITROGEN HEAT GUN) |
GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
IEC TS 60695-1-40:2002 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
ANSI Z83.14 : 1994 | GAS FOOD SERVICE EQUIPMENT - COUNTER APPLIANCES (COUNTER OR FLOOR MOUNTED) |
ANSI O2.1 : 1983 | SAWMILLS - SAFETY REQUIREMENTS FOR |
API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
API MPM CH7 : 2001 : INC : ADD 1 : 2011 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
NFPA 1914 : 2002 | TESTING FIRE DEPARTMENT AERIAL DEVICES |
CSA T530 : 0 | COMMERCIAL BUILDING STANDARD FOR TELECOMMUNICATIONS PATHWAYS AND SPACES |
MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
17/30298929 DC : DRAFT SEP 2017 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
AWS C5.2 : 2001 | RECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGING |
NACE RP 01 77 : 0 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
ANSI B11.20 : 2004 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
PD CEN/TR 16793:2016 | Guide for the selection, application and use of flame arresters |
NFPA 912 : 1993 | FIRE PROTECTION IN PLACES OF WORSHIP |
MIL S 4880 : G NOTICE 1 | SWEEPER, MAGNET, SELF-PROPELLED |
MIL-P-44401 Base Document:1990 | PRESS SECTION, MODULAR PRINTING SYSTEM |
API MPM CH7 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
MIL-B-18797 Revision G:1990 | BURNERS, SINGLE: LIGHT OIL, GAS, AND LIGHT OIL-GAS COMBINATION FOR PACKAGED HEATING BOILERS (UP TO 320000 BTU/HR THERMAL OUTPUT CAPACITY) |
NFPA 85A : 1987 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL AND NATURAL GAS FIRED SINGLE BURNER BOILER FURNACES |
NSS 1740.12 : 0 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
ASTM C 1320 : 2010 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
ASCE 25 06 : 2008 | EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
NFPA 791 : 2018 | RECOMMENDED PRACTICE AND PROCEDURES FOR UNLABELED ELECTRICAL EQUIPMENT EVALUATION |
AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
MIL-B-16220 Revision F:1988 | BOILER, STEAM, LOW PRESSURE, FIRETUBE |
IEEE 1187-2013 REDLINE | IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications |
MIL-A-26624 Revision B:1981 | AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN |
MIL-C-3925 Revision H:1989 | COMPRESSOR, RECIPROCATING AND ROTARY POWER DRIVEN, AIR [PAINT SPRAY TYPE] |
F-B-2835 Base Document:1995 | BOILER, STEAM, LOW PRESSURE, FIBRETUBE |
MIL-PRF-44015 Revision A:1997 | REFRIGERATOR-CONTAINER, FIELD, 8 FEET BY 8 FEET BY 10 FEET |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
MIL-PRF-32037 Base Document:1999 | BLAST CLEANING ROOM |
MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
IEEE 690-2004 | IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
ASTM F 2092 : 2014 : REDLINE | Standard Specification for Convection Oven Gas or Electric |
MIL-STD-1542 Revision B:1991 | |
TIA 598 : D2014 ADD 2 2018 | OPTICAL FIBER CABLE COLOR CODING |
CSA C22.2 No. 45.2 : 2008 : INC : UPD 1 : 2014 : R201300 | ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
09/19984091 DC : DRAFT JAN 2009 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
ANSI/ASSP A10.9-2013(R2018) | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
ISA 60079-27 : 2006 | FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO) |
MIL-S-8512 Revision D:1974 | SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF |
ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
CSA ISO 19906 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
IEEE C57.148-2011 | IEEE Standard for Control Cabinets for Power Transformers |
IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
MIL-B-45857 Revision C:1985 | BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY) |
MIL-W-80235 Revision C:1991 | WELDING MACHINES, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE, ALTERNATING CURRENT (AC) |
CSA/ANSI Z83.25 : 2017 | DIRECT GAS-FIRED PROCESS AIR HEATERS |
GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
UFC 3-560-01 : Change 1 | UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY |
ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
ANSI/AAMI ST55:2016 | TABLE-TOP STEAM STERILIZERS |
AGA XH0206 : 2002 | FUNDAMENTALS OF ELECTRICITY - COMBINED MANUAL & WORKBOOK |
ISA TR12.13.03 : 2009 | GUIDE FOR COMBUSTIBLE GAS DETECTION AS A METHOD OF PROTECTION |
NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
ASTM E 2739 : 2010 | Standard Specification for Personnel Decontamination System to be Used During a Chemical Event (Withdrawn 2019) |
NASA KSC STD E 0021 : 2002 | KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR |
MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
XX-C-2816 Revision A:2016 | COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER |
AWS C7.2M : 2010 | RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES |
CSA C22.2 No. 2420 : 2009 : INC : UPD 1 : 2012 | BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
CSA/ANSI NGV4.8 : 2012 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
SAE J3072_201505 | Interconnection Requirements for Onboard, Utility-Interactive Inverter Systems |
ASTM E 2942 : 2017 : REDLINE | Standard Guide for Security of Tank Farm Installations for Compliance with Spill Prevention, Control and Countermeasure Plan (SPCC) Regulations |
MIL-PRF-32278 Revision B:2008 | GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
FED-STD-794 Revision Y:2005 | TRUCKS: MEDIUM COMMERCIAL, 4X2 AND 4X4 9,500 TO 16,000 KG (21,000 TO 35,000 LBS) GVWR |
CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
MIL-T-28571 Revision G:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1,OOO GPM, 4 BY 2 |
MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
NFPA 121 : 2001 | FIRE PROTECTION FOR SELF-PROPELLED AND MOBILE SURFACE MINING EQUIPMENT |
NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
CSA/ANSI Z21.40.1 : 1996 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
CSA C22.2 No. 5 : 2013 | MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES |
IEEE 1901-2010 | IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications |
MIL-C-52037 Revision F:1990 | COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI |
API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
API 2009 : 2002 : R2007 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
NASA KSC STD E 0011 : 2009 | ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR |
CSA 4.9 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
ANSI B11.8:2001(R2007) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
CSA 4.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
CSA/ANSI NGV 4.1-2018 | Natural gas vehicle (NGV) dispensing systems |
ANSI Z21.5.2-2016/CSA 7.2:2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
ASTM F 2876 : 2010 | Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications |
IEEE C57.13.3-2014 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
CSA C22.2 No. 18.1 : 2013 | METALLIC OUTLET BOXES |
CSA/ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
ANSI Z21.92 : 2001 : INC : ADD A : 2005 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI Z21.92 : 2001 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
API 553 : 2012 | REFINERY VALVES AND ACCESSORIES FOR CONTROL AND SAFETY INSTRUMENTED SYSTEMS |
ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
IEC TR 61200-52:2013 | Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems |
CSA T568.2 : 2005 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS |
NFPA 224 : 1985 | HOMES AND CAMPS IN FOREST AREAS |
ASCE 25 97 : 1999 | EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
SAE J2910_201404 | Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety |
C22.2 NO. 280-16 | Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016) |
CSA 6.19-17 | Residential carbon monoxide alarming devices |
CSA C22.2 No. 2515:2009 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
ANSI Z21.97-2017/CSA 2.41-2017 | Outdoor decorative gas appliances |
NFPA 72B : 1986 | INSTALLATION, MAINTENANCE, AND USE OF AUXILIARY PROTECTIVE SIGNALING SYSTEMS |
NFPA 416 : 1993 | CONSTRUCTION AND PROTECTION OF AIRPORT TERMINAL BUILDINGS |
NFPA 471 : 2002 | RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
ANSI B11.0 : 2015 | SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT |
NFPA 16A : 1994 | INSTALLATION OF CLOSED HEAD FOAM WATER SPRINKLER SYSTEMS |
ANSI E1.58 : 2017 | ELECTRICAL SAFETY STANDARD FOR PORTABLE STAGE AND STUDIO EQUIPMENT USED OUTDOORS |
NFPA 71 : 1989 | INSTALLATION, MAINTENANCE, AND USE OF SIGNALING SYSTEMS FOR CENTRAL STATION SERVICE |
NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
ANS 40.35-1991 | VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE |
NFPA 49 : 1994 | HAZARDOUS CHEMICALS DATA |
NFPA 493 : 1978 | INTRINSICALLY SAFE APPARATUS IN DIVISION HAZARDOUS LOCATIONS |
NFPA 11A : 1999 | MEDIUM- AND HIGH-EXPANSION FOAM SYSTEMS |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 2 : 2013 | HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS |
NFPA 231E : 1996 | STORAGE OF BALED COTTON |
AAMI ST24 : 1999 : R2005 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
IEEE DRAFT C57.13.3 : D9 2005 | GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES |
IEEE DRAFT 937 : D2 99 | DRAFT RECOMMENDED PRACTICE FOR INSTALLATION AND MAINTENANCE OF LEAD-ACID BATTERIES FOR PHOTOVOLTAIC (PV) SYSTEMS |
NFPA 501C : 1996 | RECREATIONAL VEHICLES |
ANSI B11.2 : 2013 | SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES |
ANSI A10.5 : 2013 | SAFETY REQUIREMENTS FOR MATERIAL HOISTS |
ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
ANSI B157.1 : 1981 | SCALES, WEIGHING DEVICES, AND WEIGHING SYSTEMS, SAFETY REQUIREMENTS FOR, |
ASCE/EWRI 56/57 10 : 2010 | ASCE/EWRI 56-10 - GUIDELINES FOR THE PHYSICAL SECURITY OF WATER UTILITIES; ASCE/EWRI 57-10 - GUIDELINES FOR THE PHYSICAL SECURITY OF WASTEWATER/STORMWATER UTILITIES |
C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
ANSI Z21.17 : 1998 : INC : ADD A : 2008 : R2014 | DOMESTIC GAS CONVERSION BURNERS |
SAE J1773_201406 | SAE Electric Vehicle Inductively Coupled Charging |
NACE SP 04 08 : 2014 | CATHODIC PROTECTION OF REINFORCING STEEL IN BURIED OR SUBMERGED CONCRETE STRUCTURES |
IEEE 1661-2007 | IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems |
CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
ASTM E 1344 : 1990 : R1997 : EDT 1 | Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities |
FM 3265 : 2017 | SPARK DETECTION AND EXTINGUISHING SYSTEMS |
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 3 : 2016 : R201500 | HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS |
SAE J2293/2_201402 | Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture |
ASTM E 1344 : 1990 : R2006 | Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009) |
IEEE DRAFT C62.92.2 : 1999 | DRAFT GUIDE FOR THE APPLICATION OF NEUTRAL GROUNDING IN ELECTRICAL UTILITY SYSTEMS, PART 2 - GROUNDING OF SYNCHRONOUS GENERATOR SYSTEMS |
IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
UL 1120:3ED 1997-09-04 | Standard for Marine Engine Ignition Systems and Components |
IEEE DRAFT C37.123 : D2 FEB 96 | DRAFT GUIDE TO SPECIFICATIONS FOR GAS-INSULATED ELECTRIC POWER SUBSTATION EQUIPMENT |
ASTM E 580/E580M : 2017 : REDLINE | Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions |
ASTM D 6060 : 2017 : REDLINE | Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph |
CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ASTM F 2202 : 2002 : R2015 | Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
NFPA 232 : 2017 | PROTECTION OF RECORDS |
NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
I.S. EN 61800-5-1:2007 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
IEEE 3004.5-2014 | IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems |
IEEE C37.13-2015 | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
ICC IRC Code and Commentary Volume 1 : 2015 | IRC® Code and Commentary, Volume 1 |
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2016 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
CSA C22.2 No. 281.2 : 2012 : INC : UPD 1 : 2015 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS |
UL 60947-7-2:4ED 2017-01-27 | Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors |
C22.2 NO. 4248.1-17 | Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE) |
CSA/ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
CSA C22.2 No. 198.3 : 2005 : R2014 | COATED ELECTRICAL SLEEVING |
CSA C22.2 No. 281.1:2012 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS |
CSA C22.2 No. 184.1 : 2015 | SOLID-STATE DIMMING CONTROLS |
CSA C22.2 No. 198.3 : 2005 : R2010 | COATED ELECTRICAL SLEEVING |
CSA C22.2 No. 281.1 : 2012 : INC : UPD 2 : 2016 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS |
UL 486G:1ED 2018-01 | Sealed Twist-On Connecting Devices |
CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
NFPA 101B : 2002 | MEANS OF EGRESS FOR BUILDINGS AND STRUCTURES |
NFPA 92B : 2009 | SMOKE MANAGEMENT SYSTEMS IN MALLS, ATRIA, AND LARGE SPACES |
NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
ASHRAE 15 : 2013 | SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
ANSI B11.23 : 2002 : R2012 | SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES |
ASHRAE GUIDELINE 14 : 2014 | MEASUREMENT OF ENERGY, DEMAND, AND WATER SAVINGS |
NFPA 803 : 1998 | FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS |
NFPA 92A : 2009 | SMOKE-CONTROL SYSTEMS UTILIZING BARRIERS AND PRESSURE DIFFERENCES |
ISA RP92.04.02-2 : 1996 | INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ANSI B11.1 : 2009 | SAFETY REQUIREMENTS FOR MECHANICAL POWER PRESSES |
NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
ANSI B11.10 : 2003 : R2009 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
CSA/ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
ISA 60079-7 : 2008 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E" |
NFPA 1 : 2021 | FIRE CODE |
ANSI B11.24 : 2002 : R2012 | SAFETY REQUIREMENTS FOR TRANSFER MACHINES |
ANSI B11.24 : 2002 : R2007 | SAFETY REQUIREMENTS FOR TRANSFER MACHINES |
C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
ANSI B11.23 : 2002 : R2007 | SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES |
ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
ANSI B11.10 : 2003 : R2015 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
ANSI B11.22 : 2002 : R2012 | SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES |
CSA C22.2 No. 253 : 2016 | MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES |
ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
ANSI B11.22 : 2002 : R2007 | SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES |
ISA 12.00.01 : 2002 | ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 0, 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
ANSI/ASSP Z9.10 : 2017 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
ANSI/ASSP A10.8 : 2011 | SCAFFOLDING SAFETY REQUIREMENTS |
ANSI N665 : 1985 | FIRE PROTECTION FOR LWR FUEL FABRICATION FACILITIES, |
UNI EN ISO 10438-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
ASME B30.17 : 2015 | Cranes and Monorails (With Underhung Trolley or Bridge) |
UFC 3-540-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - ENGINE-DRIVEN GENERATOR SYSTEMS FOR PRIME AND STANDBY POWER APPLICATIONS |
ASME A112.14.4 : 2001 : R2012 | GREASE REMOVAL DEVICES |
FC 4-740-02N : 2014 | FACILITIES CRITERIA - NAVY AND MARINE CORPS FITNESS CENTERS |
UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
UFC 3-410-04N : 2004 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION |
UFC 3-410-01 : Change 4 | UNIFIED FACILITIES CRITERIA - HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS |
NEMA EW 1-1988 (R1994, R1999, R2004) | Electric Arc-Welding Power Sources |
NEMA EW 4-2009 | GRAPHIC SYMBOLS FOR ARC WELDING AND CUTTING APPARATUS |
NEMA SG 10 : 2013 | GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V |
NEMA HP 100.4 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS |
NEMA ICS 4:2015 | Application Guideline for Terminal Blocks |
NEMA EW 3:1983(R2002) | Semi-Automatic Wire-Feed Systems for Arc Welding |
NEMA KS 3:2010 | Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications |
NEMA LSD 53-2010 | PROPOSAL FOR DIGITAL PROTOCOL FOR LIGHTING CONTROL DEVICES |
NEMA ICS 61800-2:2005 | Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems |
ST 1-1988 (R1994, R1997) | SPECIALITY TRANSFORMERS (EXCEPT GENERAL-PURPOSE TYPE) |
NEMA MG 2:2014 | Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators |
NEMA PB 1:2011 | Panelboards |
NEMA KS 1:2013 | Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
NEMA SB 2:2016 | Training Manual on Fire Alarm Systems |
NEMA IA 2.2:2005 | Programmable Controllers (PLC), Part 2: Equipment Requirements and Test |
NEMA XR 9-1984 (R1994, R2000) | POWER SUPPLY GUIDELINES FOR X-RAY MACHINES |
NEMA WC 55 : 1992(R1999) | INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
NEMA PE 5:1997(R2003) | Utility-Type Battery Chargers |
ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
ASME CSD1 : 2012 | CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS |
ASME A17.7 : 2007 : R2012 | PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS |
ASME HST 5 : 2014 | PERFORMANCE STANDARD FOR AIR CHAIN HOISTS |
NEMA OS 1 : 2013 | SHEET-STEEL OUTLET BOXES, DEVICE BOXES, COVERS, AND BOX SUPPORTS |
ANSI/NEMA SB 40:2015 | Communications Systems for Life Safety in Schools |
NEMA OS 2 : 2013 | NONMETALLIC OUTLET BOXES, DEVICE BOXES, COVERS, AND BOX SUPPORTS |
NEMA IA2.1 : 2005 | PROGRAMMABLE CONTROLLERS - PART 1: GENERAL INFORMATION |
NEMA ABP 8:2016 | Avoid Arc-Flash Occurrences by Following Industry Standards |
NEMA AB 5-2011 | Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers |
NEMA ST 20:2014 | Dry Type Transformers for General Applications |
NEMA WD 1:1999(R2005, R2010, R2015, R2020) | General Color Requirements for Wiring Devices |
NEMA ICS 7.2 : 2015 | APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS |
NEMA ICS 3.1 : 2009(R2014) | GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
NEMA EW 7 : 1989 | ELECTRICAL ARC WELDING POWER SOURCES FOR THE NON-PROFESSIONAL OPERATOR |
ANSI C57.12.27 : 1982 | LIQUID-FILLED DISTRIBUTION TRANSFORMERS USED IN PAD-MOUNTED INSTALLATIONS INCLUDING UNIT SUBSTATIONS CONFORMANCE STANDARD FOR, |
NEMA HP 100.1 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS |
NEMA 280 : 1990 | APPLICATION GUIDE FOR GROUND FAULT CIRCUIT INTERRUPTERS |
AASHTO R 63 : 2013 | PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
ANSI C62.61:1993 | American National Standard for Gas Tube Surge Arresters on Wire Line Telephone Circuits |
UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
NEMA DC 20:1992(R2003,R2009,R2014) | Residential Controls—Class 2 Transformers |
NEMA VE 2 : 2013 | CABLE TRAY INSTALLATION GUIDELINES |
ANSI/NEMA KS 2:2013 | Distribution Equipment Switch Application Guide, A User\'s Reference |
NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
NEMA LSD 71 : 2014 | BEST PRACTICES FOR METAL HALIDE LIGHTING SYSTEMS RELATIVE TO LAMP RUPTURE RISKS |
NEMA ICS 1.3:1986 (R2001, R2009, R2015) | Preventive Maintenance of Industrial Control and Systems Equipment |
ANSI C82.1:2004(R2008) | American National Standard for Lamp Ballasts—Line Frequency Fluorescent Lamp Ballasts |
NEMA ICS 14:2015 | Application Guide for Electric Fire Pump Controllers |
NEMA PB 2:2011 | Deadfront Distribution Switchboards |
ASME A112.14.4 : 2001 : R2017 | GREASE REMOVAL DEVICES |
NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
UFC 1-201-01 : 2013 | UNIFIED FACILITIES CRITERIA - NON-PERMANENT DOD FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
ASME A112.14.4 : 2001 : R2007 | GREASE REMOVAL DEVICES |
NEMA ICS 10.2 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT |
UFC 3-530-01 : Change 3 | UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS |
NEMA SB 1 : 2014 | QUALITY INFORMATIONAL GUIDE FOR AUTOMATIC FIRE DETECTION AND ALARM SYSTEMS |
ASME B30.2 : 2016 | OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, SINGLE OR MULTIPLE GIRDER, TOP RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
UFC 3-575-01 : 2012 | UNIFIED FACILITIES CRITERIA - LIGHTNING AND STATIC ELECTRICITY PROTECTION SYSTEMS |
NEMA ICS 16:2001 | Motion/Position Control Motors, Controls and Feedback Devices |
NEMA ICS 61131-1-2005 (R2013, 2021) (Formerly NEMA IA 2.1-2005) | Programmable Controllers, Part 1: General Information |
ANSI/NEMA PB 2.1:2013 | General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
ANSI C82.2:2002 (R2007, R2016, S2021) | American National Standard for Lamp Ballasts—Method of Measurement of Fluorescent Lamp Ballasts |
ANSI C136.40:2014 | American National Standard for Roadway and Area Lighting Equipment—Solar Lighting Systems |
ANSI C82.12-1999 | LAMP BALLASTS - FLUORESCENT ADAPTERS |
NEMA FG 1:1993 | FIBERGLASS CABLE TRAY SYSTEMS |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
NEMA PRP 5 : 2015 | INSTALLATION GUIDELINES FOR SURFACE NONMETALLIC RACEWAY |
NEMA VE 1:2017 | Metal Cable Tray Systems |
NEMA ICS 10.1 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT |
ANSI C57.12.13 : 1982 | LIQUID-FILLED TRANSFORMERS USED IN UNIT INSTALLATIONS INCLUDING UNIT SUBSTATIONS, CONFORMANCE STANDARD FOR |
NEMA DC 3:2013 | Residential Controls—Electrical Wall-Mounted Room Thermostats |
NEMA LSD 27:2012 | Best Practices for Operating Fluorescent Lighting Systems |
NEMA ICS 61800-1:2002(R2007) | Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems |
NEMA HP 100.3 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH CROSS-LINKED (THERMOSET) POLYOLEFIN (XLPO) |
ANSI C136.16 : 1997 | Roadway and Area Lighting Equipment— Enclosed Post Top-Mounted Luminaires |
NEMA BU 2 : 1996 | MAJOR REQUIREMENTS RELATED TO THE APPLICATION AND TESTING OF LOW VOLTAGE BUSWAY |
FC 4-179-03F : 2015 | FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE |
UFC 4-021-02 : 2013 | UNIFIED FACILITIES CRITERIA - ELECTRONIC SECURITY SYSTEMS |
NEMA PR 4 : 83(R1989) | PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE |
NEMA DC 13:1979 (R1985, R1991, R1997, R2002, R2008, R2013) | Residential Controls—Line Voltage Integrally Mounted Thermostats for Electric Heaters |
NEMA PE 7 : 1997(R2003) | COMMUNICATIONS TYPE BATTERY CHARGERS |
ANSI/NEMA FB 11-2000 | PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS |
ANSI/NEMA PB 1.1:2013 | General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less |
ANSI/NEMA AB 3:2013 | Molded-Case Circuit Breakers and Their Application |
ASME A17.7 : 2007 | PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS |
NEMA HP 100:1991(R2010) | High-Temperature Instrumentation and Control Cables |
NEMA HP 100.2 : 1991(R2010) | HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS |
NEMA ICS 7.1:2014 | Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems |
NEMA ICS 1 : 2000(R2015) | INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS |
NEMA BU 1.1:2010 | General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less |
NEMA UC 2:1993 (R2000, R2005, R2010, R2015) | UNDERCARPET POWER DISTRIBUTION SYSTEMS |
NFPA 560 : 2007 | STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
WW-F-2743 Revision A:1998 | FURNACES, WARM AIR & HEATERS, UNIT, FORCED AIR CIRCULATION, OIL & GAS FIRED |
MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
IEEE 602 : 2007 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
API MPM CH4.2 : 2003 : INC : ADD 1 : 2015 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS |
IEEE DRAFT 1215 : D13 2001 | DRAFT GUIDE FOR THE APPLICATION OF SEPARABLE INSULATED CONNECTORS |
CSA C22.2 No. 198.1 : 2006 : R2015 | EXTRUDED INSULATING TUBING |
MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
MIL-HDBK-759 Revision C:1995 | HANDBOOK FOR HUMAN ENGINEERING DESIGN GUIDELINES |
UFC 4-133-01N : Change 5 | UNIFIED FACILITIES CRITERIA - NAVY AIR TRAFFIC CONTROL FACILITIES |
NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
IEEE C62.42-2005 | IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] Circuits |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
10/30231432 DC : 0 | BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
AWS D10.6 : 1991 | GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING, RECOMMENDED PRACTICES FOR |
NFPA 432 : 2002 | CODE FOR THE STORAGE OF ORGANIC PEROXIDE FORMULATIONS |
NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
ISA RP60.4 : 1990 | DOCUMENTATION FOR CONTROL CENTERS |
IEEE 487.2-2013 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems |
13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
ANSI A10.5 : 2013 | SAFETY REQUIREMENTS FOR MATERIAL HOISTS |
API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
BS EN 60974-6:2016 | Arc welding equipment Limited duty equipment |
AAMI ST24 : 1999 : R2009 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
API 500C : 2ED 84(R1990) | CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PIPELINE TRANSPORTATION FACILITIES |
ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
MIL-D-55162 Revision B:1984 | DARK ROOM, PHOTOGRAPHIC, PORTABLE ES-38() |
NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
IEEE DRAFT C57.121 : D4 OCT 96 | DRAFT GUIDE FOR ACCEPTANCE AND MAINTENANCE OF LESS-FLAMMABLE HYDROCARBON FLUID IN TRANSFORMERS |
14/30299454 DC : 0 | BS EN 60974-6 - ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
MIL-T-28690 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 50 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
MIL-A-28865 Revision A:1987 | ANTENNA GROUP, OE-82()/WSC-1(V) |
MIL-C-0043584 Revision C:1985 | COUNTER, CHECKOUT, CONVEYOR |
GGG-S-69 Revision D:1983 | SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) |
AAA-B-92 Revision D:1977 | BALANCE, ANALYTICAL |
MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
MIL HDBK 1028/8 : A | DESIGN OF PEST MANAGEMENT FACILITIES |
API 1129 : 1996 | ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY |
04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
ANSI E1.50-1 : 2017 | REQUIREMENTS FOR THE STRUCTURAL SUPPORT OF TEMPORARY LED, VIDEO & DISPLAY SYSTEMS |
MIL D 22612 : C | DETECTOR, CONTAMINATED FUEL |
MIL-PRF-32026 Base Document:1998 | CONTAINERIZED KITCHEN |
RMA B28.9 : 1983 | AMERICAN NATIONAL STANDARDS FOR RUBBER MACHINERY LET-OFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CAR AND USE |
SCTE 71 : 2008 | SPECIFICATION FOR BRAIDED, 75 OHM, COAXIAL, MULTI-PURPOSE CABLE |
MIL-PRF-26139 Revision E:2015 | TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1) |
NFPA 88B : 1997 | REPAIR GARAGES |
F-B-2903 Base Document:1998 | BOILERS, STEAM AND HOT WATER, FIRETUBE, SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
IEEE DRAFT 605 : APR 97 | DRAFT STANDARD GUIDE FOR DESIGN OF SUBSTATION RIGID-BUS STRUCTURES |
API 49 : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
NFPA 3 : 2018 | COMMISSIONING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS |
BS EN ISO 19906:2010 | Petroleum and natural gas industries. Arctic offshore structures |
API 2007 : 2ED 83 | SAFE MAINTENANCE PRACTICES IN REFINERIES |
ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
ASTM E 2543 : 2008 | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
MIL PRF 52849 : D | TEST KIT, PETROLEUM: AVIATION FUEL CONTAMINATION (PORTABLE) |
MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
MIL-W-80046 Revision D:1990 | WELDING MACHINES, RESISTANCE, STORED ENERGY, CAPACITOR DISCHARGE, DUAL RANGE |
ISA 61241-2 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY PRESSURIZATION "PD" |
ANSI Z245.1 : 2017 | MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT |
MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
ICC IPMC INTERNATIONAL PROPERTY MAINTENANCE CODE : 2015 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
IEEE DRAFT C37.91 : D7.0 2006 | PROTECTING POWER TRANSFORMERS |
ASAE S361.3 : 1990(R2011) | SAFETY FOR PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT |
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
12/30269145 DC : 0 | BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
MIL-PRF-32090 Revision A:2016 | DELIVERY SYSTEM, AERIAL, BULK FUEL |
API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
NFPA 497B : 1991 | RECOMMENDED PRACTICE FOR THE CLASSIFICATION OF CLASS II HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
MIL-B-28685 Base Document:1990 | BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILEK3 FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL (2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
EN 60079-30-2:2017 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
ANSI/ASSE A10.27 : 1998 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
MIL-M-28762 Revision C:1990 | MONITOR, PUMP NOISE, AN/WSQ-3 (METRIC) |
API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
BS ISO 21789:2009 | Gas turbine applications — Safety |
CSA C22.4 No. 1 : 2009(R2018) | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE |
A-A-58050 Revision A:2000 | FLUORESCENT PENETRANT INSPECTION UNITS INTEGRALLY ASSEMBLED SINGLE UNIT AND SEPARATE MODULAR STATION TYPES |
AAMI ST50 : 2004 : R2010 | DRY HEAT (HEATED AIR) STERILIZERS |
UFC 4-740-06 : 2006 | UNIFIED FACILITIES CRITERIA - YOUTH CENTERS |
BS EN 60974-1:2012 | Arc welding equipment Welding power sources |
ANSI B11.15 : 2001 : R2007 | SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES |
UFC 1-200-01 : 20071127 | UNIFIED FACILITIES CRITERIA (UFC) DOD BUILDING CODE(GENERAL BUILDING REQUIREMENTS) |
AFGS-87241 Revision A:1989 | SIMULATORS, FLIGHT |
CSA T568.3 : 2005 | OPTICAL FIBER CABLING COMPONENTS STANDARD |
API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
IEEE C57.111 : 1989 | GUIDE FOR ACCEPTANCE OF SILICONE INSULATING FLUID AND ITS MAINTENANCE IN TRANSFORMERS |
IEEE 3007.2 : 2010 | This recommended practice covers the maintenance of industrial and commercial power systems. |
API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MIL-STD-188-154 Revision A:1997 | SUBSYSTEM, EQUIPMENT, AND INTERFACE STANDARDS FOR COMMON LONG HAUL AND TACTICAL TELECOMMUNICATIONS CONTROL FACILITIES |
IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
ATIS T1.403.01 : 99(R2005) | NETWORK AND CUSTOMER INSTALLATION INTERFACES - INTEGRATED SERVICES DIGITAL NETWORK (ISDN) PRIMARY RATE LAYER 1 ELECTRICAL INTERFACE SPECIFICATION |
UNI EN ISO 19906 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
IEEE DRAFT C37.20.4 : 2001 | DRAFT STANDARD FOR INDOOR AC SWITCHES RATED ABOVE 1KV THROUGH 38KV FOR USE IN METAL-ENCLOSED SWITCHGEAR |
08/30195564 DC : 0 | BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
05/30127458 DC : DRAFT JAN 2005 | ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
ANSI/SPI B151.29:2014 | PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR VERTICAL CLAMP INJECTION MOLDING MACHINES |
CSA ISO 19906 : 2011 : R2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
CSA 12.8 :2002 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
A-A-50314 Base Document:1997 | Boring Machines, Engine Cylinder (Portable) |
F-B-2909 Base Document:1997 | BURNERS, SINGLE: LIGHT OIL, GAS, AND LIGHT OIL-GAS COMBINATION FOR PACKAGED HEATING BOILERS (UP TO 320, 000 BTU/HR THERMAL OUTPUT CAPACITY) |
CSA C22.2 No. 63 : 1993 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
NFPA 651 : 1998 | MACHINING AND FINISHING OF ALUMINUM AND THE PRODUCTION AND HANDLING ALUMINUM POWDERS |
API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
ANSI B11.15 : 2001 : R2012 | SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES |
CSA/ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
ANSI A225.1 : 1987 | MANUFACTURED HOME INSTALLATIONS |
NFPA 1194 : 2018 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
NACE RP 02 90 : 0 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
C22.2 NO. 188-18 | Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE) |
NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
NFPA 72C : 1986 | INSTALLATION, MAINTENANCE, AND USE OF REMOTE STATION PROTECTIVE SIGNALING SYSTEMS |
CSA C22.2 No. 63 : 1993 : INC : UPD 6 : 2012 : R200800 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
NFPA 46 : 1996 | STORAGE OF FOREST PRODUCTS |
ISA 12.10 : 1988 | AREA CLASSIFICATION IN HAZARDOUS (CLASSIFIED) DUST LOCATIONS |
ASTM F 2699 : 2008 | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas |
ISA RP12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATIONS OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS I ZONE 0, ZONE 1, OR ZONE 2 |
ANSI Z245.41 : 2015 | FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS |
NFPA 72A : 1987 | INSTALLATION, MAINTENANCE, AND USE OF LOCAL PROTECTIVE SIGNALING SYSTEMS |
C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
NFPA 123 : 1999 | FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES |
CSA C22.2 No. 18.3 : 2012 | CONDUIT, TUBING, AND CABLE FITTINGS |
IEEE DRAFT 1242 : D4 99 | DRAFT GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS |
IEEE C62.44-2016 | IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment) |
CSA T568.1 : 2005 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 45.2 : 2008 : R2013 | ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
ASTM B 812 : 1996 : R2008 | Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications |
ASTM F 2361 : 2003 : R2009 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
CSA C22.2 No. 45.2:2008 | ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
ANSI Z21.92 : 2001 : INC : ADD B : 2010 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
NFPA 57 : 2002 | LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE |
ASTM F 857 : 2017 : REDLINE | Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type |
ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
ANSI A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
SAE J2343_201802 | Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles |
CSA C22.2 No. 45.1 : 2007 : FR | ELECTRICAL RIGID METAL CONDUIT - STEEL |
CAN/CSA-C22.2 NO. 60947-1-13 (R2018) | Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
CAN/CSA-C22.2 NO. 60079-30-1:17 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations) |
NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
ANSI Z21.89-2017/CSA 1.18-2017 | Outdoor cooking specialty gas appliances |
CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
CSA C22.2 No. 1691 : 2012 | SINGLE POLE LOCKING-TYPE SEPARABLE CONNECTORS |
NFPA 485 : 1999 | STORAGE, HANDLING, PROCESSING, AND USE OF LITHIUM METAL |
NFPA 790 : 2018 | COMPETENCY OF THIRD-PARTY FIELD EVALUATION BODIES |
CSA 12.5 : 1999 : R2014 | NGV DISPENSING SYSTEMS |
CSA C22.2 No. 60745-2-15 : 2010 : R2015 | HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
UL 60950-22:2ED 2017-03-31 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
ANSI Z21.97 : 2017 | OUTDOOR DECORATIVE GAS APPLIANCES |
UL 60745-2-15:1ED 2010-06-28 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular Requirements for Hedge Trimmers |
NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
NFPA 232AM : 1991 | FIRE PROTECTION FOR ARCHIVES AND RECORDS CENTERS |
NFPA 19911 : 1991 | FIRE PROTECTION OF MUSEUMS AND MUSEUM COLLECTIONS |
NFPA 802 : 1993 | NUCLEAR RESEARCH AND PRODUCTION REACTORS |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
NFPA 85I : 1989 | STOKER OPERATION |
NFPA 4 : 2018 | INTEGRATED FIRE PROTECTION AND LIFE SAFETY SYSTEM TESTING |
NFPA 43D : 1994 | STORAGE OF PESTICIDES |
NFPA 497A : 1992 | CLASSIFICATION OF CLASS I HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
NFPA 65 : 1993 | PROCESSING AND FINISHING OF ALUMINUM |
NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
IEEE 1017-2013 | IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable |
NFPA 913 : 1992 | HISTORIC SITES AND STRUCTURES |
API 1632 : 1996 | CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS |
API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
FM 3640 : 2013 | LAND MOBILE RADIOS FOR USE IN CLASS I, DIVISION 1 HAZARDOUS (CLASSIFIED) LOCATIONS |
CSA C22.2 No. 293.1 : 2017 | SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS |
I.S. HD 60364-5-52:2011 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
EN 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
ASTM F 2521 : 2009 : R2014 | Standard Specification for Heavy-Duty Ranges, Gas and Electric |
IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
CSA/ANSI Z21-10-3 : 2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
AAMI ST65 : 2008 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
CSA C22.2 NO. 60947-5-2:14 (R2019) | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches (Bi-national standard, with UL 60947-5-2) |
AAMI ST24:1999(R2018) | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
CSA C22.2 No. 2459 : 2008 | INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
NFPA RESIDENTIAL SPRINKLER SYSTEMS : LATEST | RESIDENTIAL SPRINKLER SYSTEMS: PROTECTING LIFE AND PROPERTY |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
NFPA 1902 : 1991 | INITIAL ATTACK FIRE APPARATUS |
I.S. EN ISO 10439-1:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
I.S. EN 60974-6:2016 | ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
NFPA 12B : 1990 | HALON 1211 FIRE EXTINGUISHING SYSTEMS |
ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
ISA 60079-29-2 : 2012 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
ASTM F 1919 : 2014 : REDLINE | Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric |
IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
ASAE EP344.2 : 1999 | LIGHTING FOR DAIRY FARMS AND THE POULTRY INDUSTRY |
ANSI B151.5 : 1982 | PLASTIC FILM AND SHEET WINDING EQUIPMENT - CONSTRUCTION, CARE AND USE |
ANSI S12.15 : 1992 : R2007 | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
ASTM F 860 : 2007 : R2018 : EDT 1 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
IEEE 1159-2009 | IEEE Recommended Practice for Monitoring Electric Power Quality |
BS EN 60079-30-1:2017 | Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
ASTM F 2520 : 2005 : R2012 | Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets |
ASTM B 812 : 1996 : R2002 : EDT 1 | Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications |
EI 1592 : 2017 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING |
ASTM F 2374 : 2018-02 | PRACTICE FOR DESIGN, MANUFACTURE, OPERATION, AND MAINTENANCE OF INFLATABLE AMUSEMENT DEVICES |
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 4 : 2017 : R201500 | HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS |
ASTM C 1217 : 2000 : R2012 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
ASTM F 2834 : 2010 : REV A | Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing |
ASTM F 1602 : 2012 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
ASTM F 2796 : 2009 | Standard Specification for Hot Food Holding Tables |
ISO/TR 14799-1:2015 | Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ISO 19372:2015 | Microturbines applications — Safety |
API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
IEEE 1547-2003 | IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
NSF 49 : 2016 | BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
NFPA 101 : 2018 | LIFE SAFETY CODE |
NFPA 75 : 2017 | FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT |
API 551 : 2016 | PROCESS MEASUREMENT |
NFPA 731 : 2017 | INSTALLATION OF ELECTRONIC PREMISES SECURITY SYSTEMS |
SAE J1772_201710 | SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler |
API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
IEC TS 61968-2:2011 | Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
ISO 21789:2009 | Gas turbine applications — Safety |
ISO 10436:1993 | Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
IEEE 628-2011 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
IEEE 1547.2 : 2008 | APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS |
IEEE 1458-2005 | IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications |
IEEE DRAFT 1184 : D21 2006 | GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS |
CSA/ANSI Z21.91 : 2017 | VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS |
IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
IEEE 1818-2017 | IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations |
IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
IEEE C37.20.10-2016 | IEEE Standard Definitions for AC (52 kV and below)and DC (3.2 kV and below) Switchgear Assemblies |
IEEE 45.8-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems |
IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
IEEE C62.72-2007 | IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
BS EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service |
C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
18/30375223 DC | BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads |
ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
NASA STD 3000 VOL 2 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2 |
CSA B44.7 : 2007 : R2012 | PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS |
UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
ICC IWUIC INTERNATIONAL WILDLAND U.I. CODE : 2015 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
CSA C22.2 No. 144.1 : 2016 | GROUND-FAULT CIRCUIT-INTERRUPTERS |
NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
CSA C22.2 No. 66.1 : 2006 : INC : UPD 2 : 2013 : R201100 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
ICC IEBC CODE AND COMMENTARY : 2015 | IEBC® Code and Commentary |
CAN/CSA-C22.2 NO. 281.2-12 (R2017) | Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: Particular requirements for protection devices for use in charging systems (Tri-national standard, with UL 2231-2 and NMX-J-668/2-ANCE) |
NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
NASA KSC STD E 0006 : 1993 | INSTRUMENTATION AND COMMUNICATIONS CABLE APPLICATIONS, STANDARD FOR |
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
CSA C22.2 No. 281.2 : 2012 : INC : UPD 2 : 2016 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS |
ICC ISPSC CODE AND COMMENTARY : 2015 | ISPSC® Code and Commentary |
CSA C22.2 No. 227.1:2006 | ELECTRICAL NONMETALLIC TUBING |
CSA C22.2 No. 198.2 : 2005 | SEALED WIRE CONNECTOR SYSTEMS |
NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
CSA C22.2 No. 112 : 2015 | ELECTRIC CLOTHES DRYERS |
MIL-PRF-44259 Revision E:2009 | Light Set, Portable, Fluorescent |
CSA C22.2 No. 145 : 2011 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
CSA C22.2 No. 198.2 : 2005 : R2015 | SEALED WIRE CONNECTOR SYSTEMS |
NASA KSC STD E 0002 : 2009 | HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
UL 444:5ED 2017-01-20 | Communications Cables |
NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
NASA STD 8719.9 : 2015 | LIFTING STANDARD |
CSA C22.2 No. 250.0 : 2018 | |
NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
UL 1682:5ED 2017-02-15 | Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type |
NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 198.2 : 2005 : R2010 | SEALED WIRE CONNECTOR SYSTEMS |
UL 1786:4ED 2014-12-17 | Direct Plug-In Nightlights |
NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
NASA KSC STD Z 0007 : 1973 | DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 227.1 : 2006 : INC : UPD 2 : 2014 : R201100 | ELECTRICAL NONMETALLIC TUBING |
ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
ICC IECC CODE AND COMMENTARY : 2015 | IECC® Code and Commentary |
CAN/CSA-C22.2 NO. 281.1-12 (R2017) | Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: General requirements (Tri-national standard, with UL 2231-1 and NMX-J-668/1-ANCE) |
NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
NASA KSC SPEC E 0017 : 1996 | ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR |
NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
UL 60947-7-1:4ED 2017-01-27 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
ASTM D 3485 : 2015 | Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC) |
NASA MSFC RQMT 2918 : 2015 | REQUIREMENTS FOR ELECTROSTATIC DISCHARGE CONTROL |
CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
UL 2231-2:2ED 2012-09-07 | Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems |
UL 2420:1ED 2009-07-30 | Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
CSA C22.2 No. 62.1 : 2015 | NONMETALLIC SURFACE RACEWAYS AND FITTINGS |
CSA C22.2 No. 145 : 2011 : R2015 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
CSA C22.2 No. 66.1 : 2006 : INC : UPD 1 : 2012 : R201100 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 126.2:2002 | NONMETALLIC CABLE TRAY SYSTEMS |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
CSA C22.2 No. 83.1 : 2007 | ELECTRICAL METALLIC TUBING - STEEL |
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
ANSI Z21.23:2010 | GAS APPLIANCE THERMOSTATS |
NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
CSA C22.2 No. 281.2:2012 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS |
ISA 12.27.01 : 2011 | REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS |
CSA C22 NO. 4 : 2016 | ENCLOSED AND DEAD-FRONT SWITCHES |
API STD 612:2020 | Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
ASTM E 3010 : 2015 | Standard Practice for Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays |
CSA C22.2 No. 83.1 : 2007 : INC : UPD 1 : 2012 : R201200 | ELECTRICAL METALLIC TUBING - STEEL |
NASA KSC STD 164 : 1992 | ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR |
NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
IEC 60445:2017 RLV | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
ASME A17.7-2007/CSA B44.7-07 (R2017) | Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7) |
NASA KSC STD Z 0010 : 1983 | DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR |
NASA KSC SPEC E 0019 : 1997 | AC POWER CABLE, GENERAL PURPOSE, MULTICONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
UL 2231-1:2ED 2012-09-07 | Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements |
UL 1472:2ED 2015-09-25 | Solid-State Dimming Controls |
UL 943:5ED 2016-05-17 | Ground-Fault Circuit-Interrupters |
UL 60947-7-3:3ED 2017-01-27 | Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks |
UL 496:14ED 2017-09-05 | Lampholders |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
C22.2 NO. 18.5-13 (R2018) | Positioning devices (Bi-national standard, with UL 1565) |
CSA C22.2 No. 281.1 : 2012 : INC : UPD 1 : 2015 | STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS |
CSA C22.2 No. 198.3:2005 | COATED ELECTRICAL SLEEVING |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
NASA MSFC STD 1800 : 2008 | ELECTROSTATIC DISCHARGE (ESD) CONTROL FOR PROPELLANT AND EXPLOSIVE DEVICES |
CSA C22.2 No. 227.1 : 2006 : R2016 | ELECTRICAL NONMETALLIC TUBING |
CSA C22.2 No. 263 : 2015 | FIRE PUMP CONTROLLERS |
IEEE 3001.2:2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
CSA 6.29 : 2001 : INC : ADD B : 2010 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 No. 66.1 : 2006 : R2011 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
UL 514A:11ED 2013-02-01 | Metallic Outlet Boxes |
CSA 6.29 : 2001 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ASTM F 2363/F2363M : 2017 : REDLINE | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60335-2-40 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
UL 61010-031:2ED 2017-01-27 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held and Hand-Manipulated Probe Assemblies for Electrical Test and Measurement |
CSA C22.2 No. 227.1 : 2006 : R2011 | ELECTRICAL NONMETALLIC TUBING |
AIHA Z9.10 : 2010 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA B44.7 : 2007 | PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS |
CSA C22.2 No. 305 : 2016 | MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES FOR USE WITH PHOTOVOLTAIC (PV) SYSTEMS |
CSA C22.2 No. 227.2.1 : 2014 | LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT |
ICC 2012 INT. WILDLAND U.I. CODE : 2012 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
CSA C22.2 No. 18.5:2013 | POSITIONING DEVICES |
CSA/ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ICC ISPSC INTERNATIONAL SWIMMING POOL AND SPA CODE : 2015 | INTERNATIONAL SWIMMING POOL AND SPA CODE[TM] (ISPSC[TM]) |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA 2.37 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 No. 66.1 : 2006 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
ASTM E 1509 : 2012 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 : 2005 : R2012 | NONMETALLIC CABLE TRAY SYSTEMS |
CSA C22.2 No. 66.1 : 2006 : R2015 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
ANSI Z21.23 : 2010 : R2015 | GAS APPLIANCE THERMOSTATS |
ASTM E 1509 : 2012 : R2017 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
NASA KSC SPEC E 0018 : 1997 | AC POWER WIRE, GENERAL PURPOSE, SINGLE CONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
ANSI/PIMA IT7.100:1993 (R1999) | AUDIOVISUAL SYSTEMS - RECOMMENDED PRACTICE FOR DETERMINING THE DESIGN OF TEACHING-LEARNING SPACES WHERE AUDIOVISUAL EQUIPMENT IS USED |
IEEE 464 : 1981 | GROUNDED 830 V THREE-PHASE ELECTRICAL SYSTEM FOR OIL FIELD SERVICE, RECOMMENDED PRACTICE FOR |
ANSI C12.16 : 1991 | SOLID-STATE ELECTRICITY METERS |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
ANSI L1.1 : 1981 | SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY, |
IES LM 62 : 2006 : R2015 | LABORATORY OR FIELD THERMAL MEASUREMENTS OF FLUORESCENT LAMPS AND BALLASTS IN LUMINAIRES |
IES RP 11 : 2017 | RECOMMENDED PRACTICE FOR LIGHTING FOR INTERIOR AND EXTERIOR RESIDENTIAL ENVIRONMENTS |
IES G 1 : 2003 | GUIDE FOR SECURITY LIGHTING FOR PEOPLE, PROPERTY, AND CRITICAL INFRASTRUCTURE |
IES LM 62 : 2006 | LABORATORY OR FIELD THERMAL MEASUREMENTS OF FLUORESCENT LAMPS AND BALLASTS IN LUMINAIRES |
UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
SCTE 171 : 2016 | PASSIVE NETWORK DEVICE (NID) ENCLOSURE SPECIFICATION |
IES RP 2 : 2017 | RECOMMENDED PRACTICE FOR RETAIL LIGHTING |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
UNI EN ISO 13705 : 2013 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
IES RP 7 : 2017 | RECOMMENDED PRACTICE FOR LIGHTING INDUSTRIAL FACILITIES |
ANSI N304 : 1986 | NUCLEAR FUEL FACILITIES FOR REPROCESSING FUEL-FIRE PROTECTION, |
IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
CSA E60974.1 : 2012 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
NFPA 85F : 1988 | INSTALLATION AND OPERATION OF PULVERIZED FUEL SYSTEMS |
ANSI B77.1 : 2017 | PASSENGER ROPEWAYS - AERIAL TRAMWAYS, AERIAL LIFTS, SURFACE LIFTS, TOWS AND CONVEYORS - SAFETY STANDARD |
API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
IEEE 1531-2003 | IEEE Guide for Application and Specification of Harmonic Filters |
NFPA 50B : 1999 | LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES |
UFC 4-740-03 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: NAVY AND MARINE CORPS OUTDOOR ADVENTURE CENTERS AND RENTAL CENTERS |
NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
ANSI B11.25 : 2015 | SAFETY REQUIREMENTS FOR LARGE MACHINES |
NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
ASTM E 2908 : 2012 | Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems |
MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
UFC 4-740-14 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: CHILD DEVELOPMENT CENTERS |
FC 4-740-02F : 2013 | FACILITIES CRITERIA - AIR FORCE FITNESS CENTERS |
MIL-P-43155 Revision F:1984 | PRINTING PLANT, SPECIAL WARFARE, TRANSPORTABLE, (LIGHTWEIGHT) MODEL 800 |
MIL-S-29410 Revision B:1988 | SHELTER ASSEMBLY, RIGID GENERAL PURPOSE |
ASCE T&DI 21.2 : 2008 | AUTOMATED PEOPLE MOVER STANDARDS - PART 2 |
CEI EN 60974-1 : 2013 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES |
MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
SCTE 74 : 2011 | SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE |
NFPA 43B : 1993 | STORAGE OF ORGANIC PEROXIDE FORMULATIONS |
SAE J2990_201211 | Hybrid and EV First and Second Responder Recommended Practice |
CSA C22.4 PACKAGE : 2009 | CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS |
API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API MPM CH7 : 2001 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
API 685 REDLINE : 2011 | SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE |
API 2031 : 1991 | COMBUSTIBLE GAS DETECTOR SYSTEMS AND ENVIRONMENTAL OPERATIONAL FACTORS INFLUENCING THEIR PERFORMANCE |
MIL-W-80211 Revision C:1990 | WELDING MACHINE, (MICROWELDER), RESISTANCE, STORED ENERGY, CONSTANT VOLTAGE, LOW IMPEDANCE SOURCE, BENCH MOUNTED |
IEEE DRAFT 841 : MARCH 2000 | DRAFT STANDARD FOR PETROLEUM AND CHEMICAL INDUSTRY - SEVERE DUTY TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KV (500HP) |
ASTM F 2834 : 2010 | Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing |
PD ISO/TS 18683:2015 | Guidelines for systems and installations for supply of LNG as fuel to ships |
ANSI/ASSE A10.10 : 2014 | SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES |
API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
NACE RP 06 75 : 1988 | CORROSION CONTROL OF OFFSHORE STEEL PIPELINES |
PD IEC/TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
API 49 : 2001 : R2013 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
MIL-PRF-12048 Revision E:1998 | PETROLEUM TESTING KIT, GROUND FUELS |
14/30267384 DC : 0 | BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS |
API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
MIL-PRF-83990 Revision A:1997 | OVEN, THERMAL DRYING, ELECTRIC |
F-B-2902 Base Document:1990 | BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
ANSI Z83.15 : 1994 | GAS FOOD SERVICE EQUIPMENT - KETTLES, STEAM COOKERS AND STEAM GENERATORS |
ANSI B11.7 : 1995 | COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
API GIRE CH14 : 3ED 82 | ELECTRICAL SYSTEMS |
MIL-W-80121 Revision B:1987 | WELDING MACHINE, ELECTRICAL RESISTANCE SPOT, PORTABLE TYPE, SINGLE PHASE |
ANSI B11.9:2010 | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
ICC IPMC CODE AND COMMENTARY : 2015 | 2015 INTERNATIONAL PROPERTY MAINTENANCE CODE & COMMENTARY |
MIL-F-28675 Revision B:1985 | FITTINGS, CONDUIT, EXPLOSION PROOF (COUPLINGS, SEALS, UNIONS, ELBOWS) |
SCTE 129 : 2017 | DROP PASSIVES: BONDING BLOCKS (WITHOUT SURGE PROTECTION) |
BS EN 60445:2017 | Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors |
NFPA 50A : 1999 | GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES |
MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
MIL-M-80016 Revision C:1988 | MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE |
08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
NFPA 33 FRENCH : 1995 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
MIL-DTL-22612 Revision D:2015 | DETECTOR, COMBINED CONTAMINATED FUEL |
RMA B28.7 : 1983 | TAKEOFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
MIL-PRF-38715 Revision B:1996 | INDICATOR, COMBUSTIBLE GAS AND OXYGEN |
API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MIL-L-44142 Revision A:1986 | LAUNDRY UNIT, TRAILER MOUNTED |
UFC 1-201-02 : 2014 | UNIFIED FACILITIES CRITERIA - ASSESSMENT OF EXISTING FACILITIES FOR USE IN MILITARY OPERATIONS |
ANSI B24.1 : 1985 | FORGING MACHINERY, SAFETY REQUIREMENTS FOR, |
UFC 1-202-01 : 2013 | UNIFIED FACILITIES CRITERIA - HOST NATION FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
API MPM CH7 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
SCTE 100 : 2010 | SPECIFICATION FOR 75 OHM SMOOTH ALUMINUM SUBSCRIBER ACCESS CABLE |
ANSI B11.9 : 2010(R2015) | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
ANSI B11.13 : 1992 | MACHINE TOOLS - SINGLE AND MULTIPLE SPINDLE, AUTOMATIC SCREW/BAR AND CHUCKING MACHINES - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE |
MIL-S-26716 Revision A:1982 | STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE |
GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
MIL-D-44144 Revision A:1986 | DRYING TUMBLER, LAUNDRY |
MIL-W-80192 Revision C:1989 | WELDING MACHINE, RESISTANCE, SPOT AND SEAM, METAL FOIL, SINGLE PHASE, PORTABLE |
NFPA 409 : 2016 | AIRCRAFT HANGARS |
NFPA 40E : 1993 | STORAGE OF PYROXYLIN PLASTICS |
SAE AIR6284 | Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants |
NFPA 43A : 1990 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
AAMI ST50 : 2004 | DRY HEAT (HEATED AIR) STERILIZERS |
MIL HDBK 1028/3 : 0 | MAINTENANCE FACILITIES FOR AMMUNITION, EXPLOSIVES AND TOXINS |
ANS 54.8-1988 | LIQUID METAL FIRE PROTECTION IN LMR PLANTS |
CSA C22.2 No. 45.1 :2007 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
OO-M-340 Revision F:2004 | MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT |
UFC 4-730-10 : 2006 | UNIFIED FACILITIES CRITERIA - FIRE STATIONS |
IEEE 422-2012 | IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities |
IEEE DRAFT C57.12.01 : D6 2005 | GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS INCLUDING THOSE WITH SOLID-CAST AND/OR RESIN ENCAPSULATED WINDINGS |
MIL-S-29411 Revision B:1988 | SHELTER ASSEMBLIES, 10 FOOT AND 20 FOOT ELECTROMAGNETIC INTERFERENCE |
API 2009 : 2002 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
A-A-661 Revision A:1986 | ENGRAVING MACHINE, PANTOGRAPH, TRACER GUIDED |
API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
MIL-STD-188-124 Revision B:1992 | GROUNDING BONDING AND SHIELDING FOR COMMON LONG HAUL TACTICAL COMMUNICATION SYSTEMS INCLUDING GROUND BASED COMMUNICATIONS ELECTRONICS FACILITIES & EQUIPMENTS |
MIL-T-28691 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 65 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
MIL-A-28768 Revision B:1984 | ANTENNA, FIXED HF, GENERAL SPECIFICATION FOR |
ANSI/ASSE A10.27 : 1998 : R2011 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
UFC 3-580-01 : Change 1 | UNIFIED FACILITIES CRITERIA - TELECOMMUNICATIONS INTERIOR INFRASTRUCTURE PLANNING AND DESIGN |
02/705659 DC : DRAFT APR 2002 | ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MIL-A-28772 Revision C:1984 | ANTENNA, HF, FIXED ROTATABLE LOG PERIODIC |
UFC 3-430-11 : 2001 | UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
MIL-W-80087 Revision C:1986 | WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, ROCKER ARM, AIR OPERATED, THREE PHASE |
API 552 : 1994 | TRANSMISSION SYSTEMS |
MIL-S-64055 Base Document:1994 | SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE |
ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
ANSI B11.8:2001(R2012) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
ANSI B11.12 : 2005 : R2015 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
ANSI Z83.26 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
NFPA 907M : 1988 | MANUAL FOR THE DETERMINATION OF ELECTRICAL FIRE CAUSES |
ANSI B11.6 : 2001 : R2007 | SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
UFC 4-211-01N : Change 3 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS: TYPE 1, TYPE 2 AND TYPE 3 |
UL 1112:3ED 1997-09-05 | Standard for Marine Electric Motors and Generators (Cranking, Outdrive Tilt, Trim Tab, Generators, Alternators) |
FED-STD-807 Revision M:2005 | TRUCKS: HEAVY COMMERCIAL, 6X4 AND 6X6 19,500 TO 30,000 KG (43,000 TO 66,000 LBS) GVWR |
SCTE 226 : 2015 | CABLE FACILITY CLASSIFICATION DEFINITIONS AND REQUIREMENTS |
ASTM F 1764 : 1997 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
ASTM D 7877 : 2014 | Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes |
MIL-DTL-2036 Revision E:2014 | ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
NFPA 50 : 2001 | BULK OXYGEN SYSTEMS AT CONSUMER SITES |
CSA/ANSI Z21.94 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2017 | GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION) |
CSA C22.2 No. 254 : 2005(R2015) | MOTOR CONTROL CENTRES |
API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
SAE J2847/3_201312 | Communication for Plug-in Vehicles as a Distributed Energy Resource |
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION) |
C22.2 NO. 45.1-07 (R2017) | Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007) |
C22.2 NO. 18.1-13 (R2018) | Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1) |
CSA C22.2 No. 256 : 2014 | DIRECT PLUG-IN NIGHTLIGHTS |
ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
C22.2 NO. 213-17 | Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201) |
CSA T568.2 : 2005 : R2010 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS |
C22.2 NO. 38-18 | THERMOSET-INSULATED WIRES AND CABLES |
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2016 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 NO. 60947-4-1:14 (R2019) | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
IEEE C57.159-2016 | IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems |
CSA/ANSI Z21.94 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
CSA C22.2 No. 45.1 : 2007 : INC : UPD 2 : 2014 : R201200 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI B151.6 : 1982 | AMERICAN NATIONAL STANDARD FOR PLASTICS MACHINERY - SLIT TAPE AND MONOFILAMENT POSTEXTRUSION EQUIPMENT - CONSTRUCTION, CARE AND USE |
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 No. 63 : 1993 : R2013 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
CSA C22.2 No. 199 : 2007 : R2011 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
SAE ARP1247E | Aircraft Ground Support Equipment – General Requirements |
API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
SAE J2891_201512 | Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks |
CSA B44.1 : 2014 | ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT |
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 1 : 2011 | HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS |
API 49 RUSSIAN : 2001 : R2007 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
NFPA 490 : 2002 | CODE FOR THE STORAGE OF AMMONIUM NITRATE |
API 2008 : 4ED 84 | SAFE OPERATION OF INLAND BULK PLANTS |
ASTM E 2542 : 2008 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
IEEE 1844-2015 | IEEE Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities |
ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
NFPA 72F : 1985 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY VOICE/ALARM COMMUNICATION SYSTEMS |
API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
CSA C22.2 No. 2515 : 2009 : R2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
ASAE EP342.2 : 1995(R1999) | SAFETY FOR ELECTRICALLY HEATED LIVESTOCK WATERERS |
ANSI Z21.5.2 : 2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
NFPA 480 : 1998 | STORAGE, HANDLING, AND PROCESSING OF MAGNESIUM SOLIDS AND POWDERS |
ISA TR12.21.01 : 2004 | USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS |
CSA 12.5 : 1999 : R2004 | NGV DISPENSING SYSTEMS |
SAE J3068_201804 | Electric Vehicle Power Transfer System Using a Three-Phase Capable Coupler |
EEMUA 209 : 2015 | GUIDE TO THE DEVELOPMENT AND IMPLEMENTATION OF ON-LINE ANALYSER APPLICATIONS |
ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
API 11S5 : 2008 | RECOMMENDED PRACTICE FOR THE APPLICATION OF ELECTRICAL SUBMERSIBLE CABLE SYSTEMS |
API 554-2 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
SCTE 184 : 2015 | SCTE ENERGY MANAGEMENT OPERATIONAL PRACTICES FOR CABLE FACILITIES |
ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2011 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
CSA 6.31 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
IEEE 1526-2003 | IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems |
NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
NFPA 414 : 2017 | AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES |
IEEE C57.12.50 : 1981 | REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS |
ISA TR12.06.01 : 1999 | ELECTRICAL EQUIPMENT IN A CLASS 1, DIVISION 2/ZONE 2 HAZARDOUS LOCATION |
IEEE 1184-2006 | IEEE Guide for Batteries for Uninterruptible Power Supply Systems |
IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
IEEE 1205-2014 | IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
ANSI/ASSP A10.9:2013 | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
AWS D1.6 : 1999 ERRATA 1999 | STRUCTURAL WELDING CODE - STAINLESS STEEL |
IEEE DRAFT 1562 : D8 2006 | ARRAY AND BATTERY SIZING IN STAND-ALONE PHOTOVOLTAIC SYSTEMS |
ANSI/AIHA/ASSP Z9.9-2010 | PORTABLE VENTILATION SYSTEMS |
C22.2 NO. 2459-08 (R2017) | Insulated multi-pole splicing wire connectors (Bi-national standard, with UL 2459) |
CSA C22.2 No. 2459 : 2008 : R2013 | INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
NFPA 81 : 1986 | FUR STORAGE, FUMIGATION AND CLEANING |
IEEE 463-2013 REDLINE | IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
ANSI/ASSE A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
IEEE DRAFT 848 : D17 JAN 96 | DRAFT STANDARD PROCEDURE FOR THE DETERMINATION OF THE AMPACITY DERATING OF FIRE PROTECTED CABLES |
API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
S.R. HD 60364-5-52:2011 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
NFPA 97 : 2003 | GLOSSARY OF TERMS RELATING TO CHIMNEYS, VENTS, AND HEAT-PRODUCING APPLIANCES |
ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ANSI/ASSE A10.10 : 2014 | SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES |
IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
CSA C22.2 No. 178.1 : 2014 | TRANSFER SWITCH EQUIPMENT |
NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
NSF 40 : 2013 | RESIDENTIAL WASTEWATER TREATMENT SYSTEMS |
IEEE C37.123-1996 | IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment |
AAMI ST27 : 1988 | GUIDELINE FOR INDUSTRIAL ETHYLENE OXIDE STERILIZATION OF MEDICAL DEVICES - PROCESS DESIGN, VALIDATION, ROUTINE STERILIZATION AND CONTRACT STERILIZATION |
ASCE T&DI 21.3 : 2008 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
NSF 350 : 2014 | ONSITE RESIDENTIAL AND COMMERCIAL WATER REUSE TREATMENT SYSTEMS |
NASA KSC SPEC E 0021 : 1996 | AC POWER CABLE, INTERLOCKED-ARMORED, 600-VOLT, 60-HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
FM 3232 : 2011 | VIDEO IMAGE FIRE DETECTORS FOR AUTOMATIC FIRE ALARM SIGNALING |
NSF 46 : 2017 | EVALUATION OF COMPONENTS AND DEVICES USED IN WASTEWATER TREATMENT SYSTEMS |
NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
MSS SP 116 : 2014 | SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
ASCE 24 98 : 2000 | FLOOD RESISTANCE DESIGN AND CONSTRUCTION |
ASCE 21 00 : 2002 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
IEEE 1695-2016 | IEEE Guide to Understanding, Diagnosing, and Mitigating Stray and Contact Voltage |
NFPA 1452 : 2015 | TRAINING FIRE SERVICE PERSONNEL TO CONDUCT COMMUNITY RISK REDUCTION |
ASTM F 2202 : 2002 | Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets |
ASAE EP294.2 : 1998 | COMPUTING ELECTRICAL DEMANDS FOR FARMS |
ASTM F 2970 : 2017 : REDLINE | Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts |
HI 1.3 : 2013 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION |
API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
ANSI MH24.1 : 2005 | SAFETY STANDARD FOR HORIZONTAL CAROUSEL MATERIAL HANDLING AND ASSOCIATED EQUIPMENT |
RMA B28.8 : 1983 | RUBBER MACHINERY - WINDUP EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE |
ABS 0057 : 2017 COR 2017 | GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS |
ASTM F 2319 : 2004 | Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) |
IEEE DRAFT 602 : D2 2006 | ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES |
ASTM F 1602 : 2012 : R2017 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
CSA C22.2 No. 198.1 : 2006 | EXTRUDED INSULATING TUBING |
CSA 6.26 : 2018 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
ASCE 24 05 : 2006 | FLOOD RESISTANT DESIGN AND CONSTRUCTION |
ISO/TR 14799-2:2015 | Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
NSF 50 : 2016 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE C62.34 : 1996 | TEST METHODS AND PERFORMANCE OF LOW-VOLTAGE (1000 V RMS OR LESS) SURGE PROTECTIVE DEVICES USED ON SECONDARY DISTRIBUTION SYSTEMS (BETWEEN THE TRANSFORMER LOW-VOLTAGE TERMINALS AND THE LINE SIDE OF THE SERVICE EQUIPMENT) |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
IEEE 45.3-2015 | IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering |
CSA C22.2 No. 104:2011 | HUMIDIFIERS |
13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
UL 121201:9ED 2017-09-15 | Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
CSA C22.2 No. 250.0 : 2008 : INC : UPD 2 : 2012 | |
CSA C22.2 No. 250.0 :2008 | |
09/30193524 DC : 0 | BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY |
ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
BS ISO 19372:2015 | Microturbines applications. Safety |
CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
UL 514D:2ED 2013-06-28 | Cover Plates for Flush-Mounted Wiring Devices |
CSA C22.2 No. 250.0 : 2008 : R2013 | |
BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
IEEE C62.43.0-2017 | IEEE Guide for Surge Protectors and Protective Circuits Used in Information and Communications Technology Circuits, Including Smart Grid Data Networks--Overview |
BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
ISO 13705:2012 | Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service |
ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
UL 1008A:2ED 2017-09-05 | Transfer Switch Equipment, Over 1000 Volts |
ASTM F 1323 : 2014 : REDLINE | Standard Specification for Shipboard Incinerators |
UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
PD ISO/TR 14799-2:2005 | Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
IEC TR 62368-2:2015 | Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1 |
IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
CSA C22.2 NO. 178.3:17 | Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A) |
BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
CSA B45.10 : 2012 | HYDROMASSAGE BATHTUB SYSTEMS |
CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 | HUMIDIFIERS |
ANSI/ASSE A10.8 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.8 AMERICAN NATIONAL STANDARD - SCAFFOLDING SAFETY REQUIREMENTS (FOR VERSIONS 2001 AND 2011) |
EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
EN ISO 19906:2010 | Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010) |
EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012) |
IEEE 1361-2014 | IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems |
FM 5700 : 2018 | EXPLOSION SUPPRESSION SYSTEMS |
I.S. EN 60974-1:2012 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV)) |
API 2005 : 1996 | SERVICE STATION SAFETY |
API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
ASAE EP473 : 1994 | EQUIPOTENTIAL PLANE IN ANIMAL CONTAINMENT AREAS |
SAE ARP5818A | Aircraft Refueling Vehicle Design and Performance Requirements |
NACE SP 01 77 : 2014 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
MIL-W-45844 Revision D:1987 | WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR) |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
UNE-EN 60079-30-2:2017 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
A-A-59618 Base Document:2002 | Cleaner, Pressure, Hot-Water, Skid-Mounted |
MIL-PRF-32531 Base Document:2015 | FLUORESCENT PENETRANT INSPECTION (FPI) UNITS, SEPARATE MODULAR STATION TYPES |
IEEE 1683-2014 | IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards |
MIL-PRF-43001 Revision G:2016 | WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL |
F-S-2911 Base Document:1997 | STOKERS, MECHANICAL - FOR PACKAGED BOILERS FIRED ON COAL OR A COMBINATION OF COAL-GAS, COAL-OIL, OR COAL-GAS-OIL (2,000 TO 50,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
MIL G 45006 : F NOTICE 1 | GRINDING MACHINE, CRANKSHAFT |
MIL-HDBK-232 Revision A:1987 | RED/BLACK ENGINEERING-INSTALLATION GUIDELINES |
ANSI A10.7 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
MIL-M-29190 Revision A:1986 | MONITORING DEVICES, EMISSION, STACK RELATED |
RMA B28.6 : 1983 | REINFORCING MACHINERY FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
ISA 12.12.03 : 2011 | STANDARD FOR PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS |
API RP 1004:2003 | BOTTOM LOADING AND VAPOR RECOVERY FOR MC-306 & DOT-406 TANK MOTOR VEHICLES |
MIL-W-80187 Revision A:1985 | WELDING MACHINE, ULTRASONIC BONDING, MINIATURE WIRE |
API 555 : 2013 | PROCESS ANALYZERS |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
NFPA 501D : 1996 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
CSA HGV 4.4 : 2013(R2018) | STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS |
MIL-B-17095 Revision H:1990 | BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
ICC ICCPC INTERNATIONAL PERFORMANCE CODE : 2015 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
ANSI/ASA S12.15 : 1992(R2016) | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
ASTM F 860 : 2007 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
ASTM F 1764 : 1997 : R2002 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
UFC 4-610-01 : Change 2 | UNIFIED FACILITIES CRITERIA - ADMINISTRATIVE FACILITIES |
IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
IEEE 1036-2010 | IEEE Guide for the Application of Shunt Power Capacitors |
GR 295 CORE : ISSUE 1 | ISOLATED AND MESH BONDING NETWORKS: DEFINITION AND APPLICATION TO TELEPHONE CENTRAL OFFICES |
NFPA 115 : 2016 | LASER FIRE PROTECTION |
ASTM F 1603 : 2017 : REDLINE | Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated |
AGA XH0175 : 1987 | FUNDAMENTALS OF ELECTRICITY |
MIL-DTL-22342 Revision E:1995 | BROWS, ALUMINIUM, BEAM AND TRUSS |
MIL-B-43998 Revision D:1992 | BATH UNIT, AUTOMATED, MULTI-HEAD |
CSA/ANSI Z21.58-2018/CSA 1.6-2018 | Outdoor cooking gas appliances |
MIL-HDBK-1024-1 Base Document:1994 | AVIATION OPERATIONAL AND SUPPORT FACILITIES |
AWS C7.2 : 1998 | RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING AND DRILLING |
ANSI/IES RP-29 : 2016 | LIGHTING FOR HOSPITALS AND HEALTH CARE FACILITIES |
API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
11/30246055 DC : 0 | BS EN ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
API MPM CH7 : 2001 : INC : ADD 2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
MIL-B-40611 Revision C:1972 | BAGGING MACHINE, FRUIT AND PRODUCE |
MIL D 45582 : B | DESOLDERING & RESOLDERING KITS, ELECTRIC |
API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
MIL-W-80253 Revision B:1990 | WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, SINGLE PHASE |
09/30171555 DC : DRAFT SEP 2009 | BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
ALI B153.1 : 1990 | CONSTRUCTION, CARE, AND USE OF AUTOMOTIVE LIFTS, SAFETY REQUIREMENTS FOR, |
NFPA 601 : 2015 | SECURITY SERVICES IN FIRE LOSS PREVENTION |
API 99 : 2014 | FLASH FIRE RISK ASSESSMENT FOR THE UPSTREAM OIL AND GAS INDUSTRY |
ANSI E1.43 : 2016 | ENTERTAINMENT TECHNOLOGY - PERFORMER FLYING SYSTEMS |
IEEE C37.17-2012 | IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers |
API 680 : 1ED 87 | PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES |
ANSI B28.1 : 2017 | SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER INDUSTRY |
GGG-B-175 Revision A:1987 | BENDER, ELECTRICAL CONDUIT, HAND (PORTABLE) |
ASTM F 2876 : 2010 : R2015 | Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications |
I.S. EN 60079-30-1:2017 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
IEEE 649-2006 | IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
ASTM F 860 : 2007 : R2013 | Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
ASAE EP329 : 2001 | SINGLE-PHASE RURAL DISTRIBUTION SERVICE FOR MOTORS AND PHASE CONVERTERS |
ANSI B152.2 : 1982 | AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE AND USE OF PERMANENT-MOLD CASTING MACHINES (OTHER THAN GRAY IRON) |
ASAE S354.3 : 1995 | AGRICULTURAL EQUIPMENT - SAFETY FOR FARMSTEAD EQUIPMENT |
MIL-W-80256 Revision A:1987 | WELDING MACHINES, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE |
MIL-W-80070 Revision D:1987 | WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, ROCKER, ARM, SINGLE PHASE |
UFC 4-213-10 : Change 1 | UNIFIED FACILITIES CRITERIA - DESIGN: GRAVING DRYDOCKS |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
UL 1128:3ED 1997-09-25 | Standard for Marine Blowers |
NSF 350-1 : 2017 | ONSITE RESIDENTIAL AND COMMERCIAL GRAYWATER TREATMENT SYSTEMS FOR SUBSURFACE DISCHARGE |
MIL-F-44402 Base Document:1990 | FINISHING SECTION, MODULAR PRINTING SYSTEM |
API 11S5 : 2008 : R2013 | RECOMMENDED PRACTICE FOR THE APPLICATION OF ELECTRICAL SUBMERSIBLE CABLE SYSTEMS |
MIL-I-2220 Revision C:1991 | INSTRUMENT, ELECTRICAL MEASURING, HYDROGEN GAS INDICATING, NONPORTABLE,[SUBMARINE USE] |
14/30267605 DC : 0 | BS EN 60079-30-2 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN; INSTALLATION AND MAINTENANCE |
MIL-W-80124 Revision C:1987 | WELDING MACHINE (MICROWELDER), RESISTANCE, SINGLE PHASE, BENCH MOUNTED |
NFPA 68 : 2018 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
MIL-A-29521 Base Document:1988 | ANTENNA GROUP, AN/BRA-34(V), AN/BRA-34A(V), AN/BRA-34B(V) |
ANSI B11.11 : 2001 : R2012 | SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
CSA M688 : 2010 : FR | PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY |
CSA T568.3 : 2005 : R2010 | OPTICAL FIBER CABLING COMPONENTS STANDARD |
IEEE C62.92.4-2014 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part IV: Distribution |
UFC 3-570-01 : 2016 | UNIFIED FACILITIES CRITERIA (UFC) - CATHODIC PROTECTION |
A-A-52213 Base Document:1997 | BATH UNIT, PORTABLE, FOUR SHOWERHEADS |
NFPA 72D : 1986 | INSTALLATION, MAINTENANCE, AND USE OF PROPRIETARY PROTECTIVE SIGNALING SYSTEMS |
NFPA 73 : 2016 | ELECTRICAL INSPECTIONS FOR EXISTING DWELLINGS |
GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) |
MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
C22.2 NO. 214-17 | Communications cables (Bi-national standard, with UL 444) |
CSA 1.6 : 2018 | OUTDOOR COOKING GAS APPLIANCES |
API 554-2 : 2008 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
UFC 4-730-01 : Change 1 | UNIFIED FACILITIES CRITERIA - FAMILY SERVICE CENTERS |
API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
CSA/ANSI NGV4.8 : 2012 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
ANSI E1.6-1 : 2012 | ENTERTAINMENT TECHNOLOGY - POWERED HOIST SYSTEMS |
CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 2420 : 2009 | BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
AWWA C542 : 2016 | ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES |
CSA 12.8 : 2002 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
CSA/ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
ANS 57.2-1983 | LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR, |
ASTM F 1202 : 2016 : REDLINE | Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type |
MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED |
ANSI/ASSE A10.27 : 1998 : R2005 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
ANSI B169.1 : 1990 | SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE, AND USE OF MACHINERY USED IN ENVELOPE MANUFACTURING |
MIL-DTL-52849 Revision E:2008 | TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE) |
ISA 7.0.01 : 1996 | QUALITY STANDARD FOR INSTRUMENT AIR |
ASTM F 1764 : 1997 : R2018 | Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue |
API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 : R2012 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
CSA/ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2012 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
ANSI Z21.92 :2001 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 No. 199 :2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
IEEE C37.17-2012 | TRIP DEVICES FOR AC AND GENERAL PURPOSE DC LOW VOLTAGE POWER CIRCUIT BREAKERS |
CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 | METALLIC OUTLET BOXES |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
ANSI B11.20 : 2004 : R2015 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
ANSI B11.11 : 2001 : R2007 | SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 | CONDUIT, TUBING, AND CABLE FITTINGS |
ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
CSA M688 : 2010 : INC : UPD 1 : 2011 : FR | PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY |
CSA/ANSI Z21.40.1 : 1996 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
ANSI B11.21 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
NFPA 72E : 1990 | AUTOMATIC FIRE DETECTORS |
API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API TR 11L6 : 2008 | TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE |
CSA T568.1 : 2005 : R2010 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
ICC IBC CODE AND COMMENTARY VOLUME 1 : 2015 | IBC® Code and Commentary, Volume 1 |
CSA C22.2 No. 60335-2-89 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR |
CSA C22.2 NO. 60947-5-1:14 (R2019) | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (Bi-national standard, with UL 60947-5-1) |
ASTM C 1217 : 2000 : R2006 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
CAN/CSA-C22.2 NO. 60947-7-1:17 | Low-voltage switchgear and controlgear ? Part 7-1: Ancillary equipment ? Terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-1-ANCE and UL 60947-7-1) |
SCTE 117 : 2010 | SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES BROADBAND COAXIAL CABLE |
CAN/CSA-C22.2 NO. 60947-7-2:17 | Low-voltage switchgear and controlgear ? Part 7-2: Ancillary equipment ? Protective conductor terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-2-ANCE and UL 60947-7-2) |
API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
CSA HGV 4.5 : 2013 | STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING |
ANSI/ASSE A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
SAE J2406_201802 | Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks |
CSA/ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
CSA C22.2 No. 291 : 2014(R2019) | BARE AND COVERED FERRULES |
IEEE DRAFT C37.96 : D5 99 | DRAFT GUIDE FOR AC MOTOR PROTECTION |
ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
CAN/CSA-C22.2 NO. 60947-7-3:17 | Low-voltage switchgear and controlgear ? Part 7-3: Ancillary equipment ? Safety requirements for fuse terminal blocks (Trinational standard NMX-J-538/7-3-ANCE with UL 60947-7-3) |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
AWS D10.6/D10.6M : 2000 | RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING |
AWS C5.4 : 1993 | RECOMMENDED PRACTICES FOR STUD WELDING |
IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
IEEE 1215-2013 REDLINE | IEEE Guide for the Application of Separable Insulated Connectors |
IEEE C37.116-2007 | IEEE Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks |
IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
IEEE 487-2015 | IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations |
IEEE C62.48 : 2005 | GUIDE ON INTERACTIONS BETWEEN POWER SYSTEM DISTURBANCES AND SURGE-PROTECTIVE DEVICES |
IEEE 3003.2-2014 | IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems |
AWS WHC2.02 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 2: SHIELDED METAL ARC WELDING |
NFPA 1402 : 2012 | BUILDING FIRE SERVICE TRAINING CENTERS |
IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
IEEE C62.62-2010 | IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits |
IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
IEEE 1585 : 2002 | FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS |
CSA 11-6 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
IEEE 18-2012 | IEEE Standard for Shunt Power Capacitors |
IEEE 1584.1-2013 | IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM) |
IEEE 317-2013 REDLINE | IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
I.S. EN ISO 19906:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
IEEE 1623-2004 | IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
CSA HGV 4.7:2013:(R2018) | AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
ASCE T&DI 21 13 : 2013 | AUTOMATED PEOPLE MOVER STANDARDS |
IEEE 937-2007 REDLINE | IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems |
IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
AWS A5.10 : 1992 | BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
IEEE DRAFT 18 : D7 99 | DRAFT STANDARD FOR SHUNT POWER CAPACITORS |
ANSI B151.7 : 1982 | EXTRUSION MACHINES IN THE RUBBER & PLASTICS INDUSTRY - CONSTRUCTION, CARE, AND USE, |
NFPA 231 : 1998 | GENERAL STORAGE |
NFPA 61D : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE MILLING OF AGRICULTURAL COMMODITIES FOR HUMAN CONSUMPTION |
CSA C22.2 No. 211.3 : 1996(R2007) | REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
NFPA 124 : 1988 | FIRE PROTECTION OF DIESEL FUEL AND DIESEL EQUIPMENT IN UNDERGROUND MINES |
NFPA 61A : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN FACILITIES MANUFACTURING AND HANDLING STARCH |
NFPA 61C : 1989 | PREVENTION OF FIRE AND DUST EXPLOSION IN FEED MILLS |
NFPA 30 FRENCH : 1996 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 74 : 1989 | HOUSEHOLD FIRE WARNING EQUIPMENT |
SAE J2645_201802 | Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems - Truck and Bus |
ASCE/SEI 25 16 : 2016 | EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
IEEE DRAFT 1476 : D4.1 NOV 99 | DRAFT STANDARD FOR PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES |
ANSI Z83.12 : 1994 | GAS FOOD SERVICE EQUIPMENT - BAKING AND ROASTING OVENS |
IEC 60364-4-42:2010+AMD1:2014 CSV | Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
FAA AC 150/5210-15 : 2008 | AIRPORT RESCUE AND FIREFIGHTING STATION BUILDING DESIGN |