ONORM EN 1010-1 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
26-06-2024
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Requirements common to printing and paper converting
machines
5.2.1 Safeguarding of danger points
5.2.2 Guards and interlocks
5.2.3 Devices for setting-up, cleaning, trouble-shooting
during the work process and maintenance
5.2.4 Explosion prevention and protection
5.2.5 Electrical equipment
5.2.6 Control systems
5.2.7 Indicators, marking, actuators, prestart warning devices
5.2.8 Two-hand controls
5.2.9 Electrosensitive protective devices (ESPDs)
5.2.10 Pressure sensitive mats, trip devices
5.2.11 Safety position switches
5.2.12 Work platforms, access stairs, passageways and
raised workplaces
5.2.13 Stability
5.2.14 High contact temperatures
5.2.15 Noise
5.2.16 Radiation hazards
5.2.17 Immunity to electromagnetic disturbances
5.3 Common devices
5.3.1 Stationary knives
5.3.2 Rotary tools
5.3.3 Dangerous tools
5.3.4 Feeding units, delivery units (pile lifting
and lowering devices)
5.3.5 Reel unwinding and rewinding devices for webs
6 Verification of the safety requirements and/or protective
measures
7 Information for use
7.1 Minimum requirements for machine markings
7.2 Instruction handbook
Annex A (informative) Classification of zones for printing
presses and finishing machines (relating to 5.2.4)
Annex B (normative) Audible prestart warning devices
Annex C (informative) Risk analysis relating to the pitch
angle of access stairs
Annex D (informative) Example of layout of an instruction
handbook
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of
EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 94/9/EC
Bibliography
Applies to printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. It also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).
DocumentType |
Standard
|
PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NBN EN 1010-1 : 2005 + A1 2011 | Identical |
I.S. EN 1010-1:2005 | Identical |
EN 1010-1:2004+A1:2010 | Identical |
NS EN 1010-1 : 2004 + A1 2010 | Identical |
UNI EN 1010-1 : 2011 | Identical |
NF EN 1010-1 : 2005 + A1 2011 | Identical |
DIN EN 1010-1:2011-06 | Identical |
BS EN 1010-1 : 2004 | Identical |
UNE-EN 1010-1:2005 | Identical |
NEN EN 1010-1 : 2005 + A1 2010 | Identical |
SN EN 1010-1 : 2005 + A1 2011 | Identical |
ONORM EN 1034-1 : NOV 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
ONORM EN 1010-2 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
ONORM EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
ONORM EN ISO 13849-1 : 2016 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ONORM EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
ONORM EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.